BIQU CryoGrip Pro Frostbite Cold Build Plate for Bambu-Lab P2S P1S P1P X1C X1E A1 3D Printers, Super-Tack Spring Steel Sheet, 257x257mm, Room Temperature Printing, Double-Sided

The build plate came sealed and perfectly protected, no damage at all. I’m using it with my Bambu Lab P1S, and I’ve since swapped it in place of the standard textured PEI plate. If your printer doesn’t have the QR code reader, just remember to manually adjust your build plate settings—it makes a big difference in print quality and adhesion. What I Like: Adhesion is excellent, easily better than the original PEI plate. Prints stay firmly in place during runs, even larger or more intricate ones. The surface feels durable and high-quality, and it’s clear this plate was built for reliability. It’s been great for detailed or tall prints where strong first-layer grip really matters. What I Don’t Like: That same strong adhesion can be a double-edged sword—it makes removing prints a bit tougher. You also can’t really print rafts or very flat items directly on this plate because they’ll stick too firmly. It just takes some tuning to find the right balance in your print settings. Would I Recommend It: Yes, for anyone looking for stronger adhesion and more consistent prints than the stock plate provides. Just be prepared to tweak your settings and handle removal carefully. Once you get it dialed in, it’s a solid upgrade.

This was the solution to all my problems!! I got my kids a Flashforge Adventurer 5M for Christmas and prints kept coming off the build plate no matter what I did (yes I tried adhesive glue, hairspray, cleaning the plate). After realizing the stock plate was trash, google told me to give this one a try. It came in this morning and I am AMAZED!! I was able to print EVERYTHING that failed on my previous build plate, whit this one with zero issues! Prints adhere to the plate in a manner that ensures it won’t come off during the print, but releases with a little effort. For what my word and experience with a trash build plate is worth, this one is worth every penny!

Works pretty good. Fits the FlashForge AD5M / Adventurer 5M. Seems best suited for PLA and ABS. Stickier filaments such as PETG or TPU adhere too well and will likely damage the plate very quickly. Prints do NOT automatically release from this plate like they do with a powder coat textured PEI sheet or a smooth PEI sheet. It is more like BuildTak or what came with the Ender 3. It's still best to heat your bed up but you can use much lower temperatures. PLA will print no problem with no heating, ABS will print okay at 90° rather than 110° This would be great for use with: PLA, ABS, ASA, HIPS, Nylon, Polycarbonate. I wouldn't necessarily use this with: PETG, PCTG, TPU, TPE, Polypropylene

After reading reviews, it was almost split but I took a chance and it works great. No errors this far and my prints stick well. Great plate!

Your problems of getting things to stick will change to getting them off the build plate. It's worth the purchase and no more failed prints. Hides the bad 1st layer pretty well too on k1 max stock crappy print bed. Leaves a glossy finish on your print with a mild texture.

Excellent Build plate, Great balance between plate adhesion as well as removability. I exclusively use the crygrop build plate now because I also enjoy the satin surface finish it gives my prints. I ordered 8 BIQU plates from them, I did have to have 2 of them replaced as the quality of them was not up to par and the prints would not stick despite through cleaning with soap and water. The replacement that was sent was great and worked as advertized.

Popped this bad boy in, re-ran autolevel on the printer screen, and a few minutes later ran some pla on it. Adhesion was awesome, stuck like glue. A quick ten minutes in the freezer as advised by Biqu and it came eufy off. The real surprise was when I used ASA on this. During print, it held tightly. My project finished without using rims and zero warping. I let the plate cool completely before removing and the asa prints literally slid off with their own weight. Literally zero effort to get them off. I tried several more ASA prints and it was the same story: solid Adhesion during printing and instant release upon bed plate cooling. I am SHOCKED! These are really awesome! They fit perfectly on my Flashforge Adventurer 5m pro. Extreamly easy to install and use.

Bought this as an upgrade to my Bambu Lab P1S. Note that you cannot wash it with alcohol so I washed it with dishwashing liquid and warm water. The build quality seems good. You can tell it's coated with a high stick material. When the printer wipes the nozzle against the top of the plate while it's getting ready to print it did scrape away this coating. Design flaw or unavoidable? I print mainly with PETG and Bambu Studio did not want me to even try and run this at lower temperatures using the built in profile for the Bambu cold plate. I'm running it at 60 C for PETG with good adhesion. When your prints finish make sure you let the plate come back to room temperature before you try and remove the parts or they'll stick to the plate. The over all build for the money is good and I really like the blue color when picking from my small selection of build plates. I think it definitely needs to be dialed in settings wise.

とても良く定着します サポートの一層目や、ブリムは爪で引っ掻いて取るのが困難なくらいです 接着面はスムースプレートに比べると若干ザラっとしますが、テクスチャープレートのような模様が出ることはありませんでした

It is banded unable to use with my printer bambu lab p1s. So pls replace it as soon as possible

Buena placa, la tengo en otros modelos y funciona excelente no se despega nada

Muy buen producto

非常に強力に密着します。 しかも pla だと温度が低く設定できるので、プレートを触ってもほとんど暑さを感じません。