VEVOR 15L Sonic Cleaning, 40kHz Professional Cleaning Machine with Digital Timer & Heater, 110V - Ideal for Wrenches, Screwdrivers, and Industrial Parts Cleaning, FCC/CE/RoHS Certified

I use this VEVOR 6L ultrasonic cleaner specifically for cleaning vinyl records, and for the price, it’s been excellent. It makes a noticeable difference in sound quality — cleaner playback, less surface noise, and records just look better after a cycle. The 6L capacity is ideal for my setup. I typically clean 4–5 records at a time, and it handles that workload without any issues. It’s been used weekly and has held up well so far, which says a lot given the repetitive use. This isn’t a luxury audiophile machine, but it punches above its weight. If you want effective ultrasonic cleaning without spending a fortune, this is a solid buy. I’d purchase it again without hesitation.

Works good, I’ve run about 400 records through it and no problems. Most of those records I’ve run through the spin clean, and still there was debris in the bottom so I assume it’s cleaning them better. It is noisy, but I just set a timer and go in the other room. Go to YouTube, plenty of instructions there on how to use it.

I used this unit and liked it quite a bit until after about 12 uses, it shut off and would not function any longer. I used it to clean pistol parts, so I ran it a maximum of 2 times per week for about 6 weeks in 15 minute intervals. I used heating and the ultrasonic cleaning, maybe that was too much for it. It worked well, but suddenly it shut off in the middle of a cleaning and would not turn back on. The rear power switch still worked based on the light in the power switch coming on, but the front panel just stopped working - no lights or anything. I unplugged it, let it cool down, and tried again, but nothing. I returned the product for a refund and I'll be looking for something a little more well made. Maybe I overworked it? Not too sure but definitely something to keep in mind if you plan on using it fairly frequently. I was outside of the return window by about 2 weeks but Amazon helped me out and extended the return window. Something else to note - the tray that holds the cleaning solution is not removable, so emptying the unit and cleaning it can be a bit of a hassle because you have to take the entire unit to a sink rinse the tray from there. Its not a huge deal, as I am not sure it would work as well if it did have a removable tray, but something else to keep in mind as the unit is not small.

I used this Vevor 6Liter JPS-30A exactly four times in the past year. Purchased in January 2024. Today, Oct. 25, 2025, I plugged it in, the rear power on indicator was illuminated, but the front panel as dead. No display, only a .5 second frequency beep was coming out of the interior. This thing looks brand new. I cleaned brass clock parts in it four times. It worked perfectly...until today. UPDATE: As of yesterday, October 27, 2025, after emailing Vevor Customer Support, they are graciously sending me a new "Motherboard". They said it was most likely the source of the non-functioning front board and the half-second frequency beeps that are emanating from inside. Thank you Vevor! I hope this one lasts longer than the first. Maybe a newer version board? I hope so. Hence the new rating of 4⭐️ from 2⭐️.

Heats the water solution in good time remember it is almost 5 gallons. Really works good cleaning car parts. I used water and Simply Awsome cleaner from the dollar store. 2 quarts to 5 gallons.

I got this for my boyfriend for Christmas and he has been using it every day since he’s gotten it. He got it on the 24th of 2025 and it’s now the 31st. He absolutely loves this thing. He told me it cleans everything really well and he has no complaints. I guess if you don’t wanna buy the cleaning solution, you can use vinegar and dish soap. I don’t really know I would look it up but he says it works well. I know the cleaning solution is very expensive.

Good machine. Does it's job well. Heater works, just takes a while to heat the fluid up to temp. Will take off paint depending on fluid used so keep that in mind. Overall, it's a good value

Affordable and effective ultrasonic cleaner for your prized vinyl collection. Just a few minor issues. First of all the cleaner itself seems of high quality. I've used ultrasonic cleaners at work for years in the med/pharma industry. Not sure how robust these will be by comparison, but they are made from stainless and feel sturdy. Controls are simple and effective, albeit a bit on the loud side. When pushing the buttons on the front of the unit, they beep pretty loudly. Now are the areas of concern. First, the drying rack is horrible. Mine was missing a few washers and some of the wingnuts, but either way setting that up is awkward and didn't feel entirely safe. I opted to make/3d print my own. Second issue is with the "spacer discs". There are several spacers included in the kit and they are essential in way the way the system fits on the rotation motor. the problem was that the through hole on 3 of the discs were slightly undersized. I had to use a drill to open them up slightly so that they would fit on the motor shaft. Lastly, my issue is with the rotation speed. It moves way too fast. you have to give the ultrasonic agitation some time to work and this motor has to be moving at 5-6 RPM, when it should be going much slower (1-2 RPM). I was able to buy, separately a variable voltage adapter that allows me to slow the motor down significantly. Fixing this issue as well. https://www.amazon.com/dp/B0F2DV77HL?ref=ppx_yo2ov_dt_b_fed_asin_title Overall, for the price this is hard to beat. And once i fixed the issues i encountered i was pleased with the performance. The record cleaning hardware seems to be thrown together to make it work with an industrial cleaner. but the price was right for my budget so I'm overall happy with the purchase.

Es la opción mas barata para limpiar vinilos, he recuperado vinilos muy sucios y además de seis en seis. Recomiendo, eso si, hacerse una buena mezcla para limpiarlos, buscar información en internet. Con otra mezcla aprovecho para limpiar juguetes, gafas... la estoy machacando, merece muchísimo la pena.

appareil acheté pour une collection de disques vinyles en 33trs et 45trs . pour le moment , j 'en ai nettoyé environ 500 , c'est très efficace ! cela va beaucoup plus loin qu 'une brosse évidemment ! pour les 45trs : ne pas hésiter à remplir la cuve au dessus du marquage , il faut des centreurs 45 trs pour tenir les disques entre les rondelles fournies , ce n'est pas serré , mais ils tournent sans soucis . conseil : remplacer l'alimentation d'origine 24V par une "universelle" j'en avais une chez moi , je fais tourner le moteur sur 7,5V . du coup : 3 trs / minute ,au lieu de 7 trs /minute , c'est mieux ! sinon c'est parfait ! je règle sur 28° et 20 minutes . je ne me sert pas de l 'égouttoir fourni car il n'est pas pratique à mon gout . bref ; bon appareil pour nettoyer à fond ses disques sans se ruiner !

la ocupe y solo funciono 2 veces se reparo y volvio a hacer lo mismo

Excelente producto y servicio

Der Ultraschallreiniger ist, gemessen am Preis, unschlagbar! Aber man sollte ein wenig basteln können. Die Trenner zwischen den LPs sind nicht wasserdicht, so dass die Label feucht werden. Eine dünne Lage selbstklebendes Moosgummi auf beiden Seiten der Scheibe sorgt da für Abhilfe. Der Motor für die Spindel dreht sich mMn etwas zu schnell. Für Abhilfe kann ein 12-Volt-Netzteil oder gar ein 5-Volt-Netzteil sorgen. Damit dreht sich die Spindel schön langsam, so dass die LP bei jeder Umdrehung eine möglichst lange Zeit im Bad verbringt. Ich habe mit dafür ein regelbares Netzteil besorgt: https://www.amazon.de/dp/B0D9CMC9Q3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 Mit diesen kleinen Änderungen ist der Ultraschallreiniger perfekt für größere Plattensammlungen.