ibaye Screen Replacement Compatible iPhone 6S LCD Display Design White 4.7 inch Touch Screen Digitizer Frame Assembly Full Set Repair Guide

الوصف

Only fit for iPhone 6S 4.7inchNote: The new screen replacement have only two flex cables, you should transfer the front camera sensor flex cable and finger sensor flex cable from your old screenSo total three flex cables.Please contact us without hesitate when have any problem before returning this item, as long as the item cannot work, refunded is supported.Disassembling1.When disassembling your iPhone 6S, please don't just pull the screen out directly.The ribbon cable of the "Home" button is connected to the screen.It is very flimsy You should open up thescreen a little,disassemble the ribbon cable and then get the screen out.2.When install the screw of the camera, please notice that the long screw must be at the top left corner, or it will damage the LCD screen.3.If the phone is deformed, it is easy to get stuck when installing, please do not press down directly, it's easy to burst the screen, you should press it downward by flat pushing.4.The screen belongs to fragile items, so please be careful when you install it in case it break.If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps: 1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.2.Disconnect and reconnect the flex cables from the motherboard side. 3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again. 4.Make sure for iPhone 6S IOS is upgraded to the latest version. Package Include: 1* LCD Screen for iPhone 6S 4.7inch 1* Phone Ring Stand 1* Set Repair Tool Kits 1* Retail Box 1* Instruction1*Nano Protective FilmCompatible for these versions: A1633 A1688 A1691 A1700