Amico Vanity Lights for Bathroom, 4-Lights Bathroom Light Fixture Over Mirror for Bath Glass Shade Light, Wall Sconce Lighting for Hallway Black and Gold

Definitely updated one of our guest bathrooms in our home and gave it a more modern look. Was VERY easy to install, too. I shut off the power to that room, removed the previous light fixture and then installed the mounting bracket to the junction box. After a quick assembly of the fixture itself, I was ready to connect my electrical wires with twist caps (included). Once the wiring was connected, I slid the fixture over the mounting bracket and then placed the threaded caps over the mounting screws. Once mounted, I attached the glass coverings for the lights with the provided screws and then finally installed the Edison bulbs (E26 standard base; not included). (Bulbs in photo were temporary during installation. Edison bulbs are now installed.)After completion, I switched the break back on and tested the switch to ensure I had installed properly. WOOHOO! Took me all of 15 minutes total.Very pleased with the overall look of this fixture and would definitely recommend to others. 10/10 for our family.

This light is a heavy and well made quality bathroom light. With heavy glass shades and the ability to use different bulbs adds to the versatility of this light. Easily installed, this light can be incorporated into several design concepts especially the simpler concepts. In short, this light will look good in about any bathroom that has a splash of black such as towels or black as a contrast to brass. The simple industrial features adds contrast and texture to your bath. I think you will be pleased with this light, but the design could detract from the looks your bath. This is a hard design and would fit well in log cabins, simplistic and industrial themes. One criticism is the box has two fixtures pictured as shown in the pictures- a 4 light fixture and a 5 light fixture. Overall, this is a well built quality light that is easily installed.

The media could not be loaded. This fixture is going to look incredible in my sons bathroom. It does require more assembly than I was prepared to do but it wasn’t that bad. It took me a few minutes. The only part that was hard was connecting the power to the arms of the fixture. There are these tiny orange clips that are hard to grasp and push together but ultimately, I was able to do it with some pliers. Something to note, the glass covers are screwed into the fixture in a way they cannot be replaced if one ever breaks or you want to change the look by swapping out the glass. Not that I’d want to do that, just wanted to mention it. Came with all the parts and pieces needed to assemble and a detailed instruction booklet with lots of easy to see diagrams in color!