Hinrichs 10 x 100 ml Liquid Dropper Bottles with Funnel Measuring Beaker 10 Labels - Injection lock - measure store liquids - LDPE Material - Plastic Dropper Bottles

Great bottles, just what I was after, perfect size for mixing my eliquids, one thing it could do with is a cap because when you snip the top to get your mixture out there is nothing to put back on after and that is my only quibble apart from that the bottle is spot on and the delivery came through nice and quickly and was well packaged, thank you.

These are great, durable and water tight. The little caps are a bit fiddly and they come off the attaching strip after a lot of use bit the hole is so small, its not even needed for most of what i use them for (inks and paints)

ordered these a few times now and for the price you canny go wrong, only gripe is the lid to the bottle, once you cut the plastic top its not very durable in terms of liquid spillage, so make sure the bottle stays on a steady surface ones opened.

Pros:Nice squishy LDPELong nozzle gives good controlFlexible width openingNot tall and narrow like unicorn bottles, so better for mixingCons:Lids, caps, straps holding caps to bottles..Not reliable: about half of caps don't stay onEven those that work don't stay on very wellCaps leak when shaking, even if you hold them downOne of the screw-on lids also leaks from bottom during dispensingStrap that holds cap breaks off really easilyBottles are very soft - feel softer than other LDPE bottlesLabels don't stick very wellFirst deducted 1 star for caps not staying on, now another for leaking. With 1st bottle, lid was ok - stayed on but would come off easily, had to hold down for shaking/mixing, but didn't leak. Have used a few more now, and checked a few more, and with at least half, the cap won't stay on, sits loosely on tip at an angle, won't push down and leaks even when holding it down. The little strap breaks off really easily.. so the caps will get lost. They're ok for storing e juice/liquids indoors, upright, but not for carrying it or mixing it, and even for dispensing they're not great, due to potential for leaking.This is my original review, after using 1st bottle:I prefer LDPE bottles to PET (clear, harder plastic), as LDPE is softer and easier to squeeze out e juice - it's also supposed to be less toxic. Most plastics give off some chemicals over time, so for long-term storage, glass is best, but for DIY mixing and short-term storage, I like these. I've got unicorn bottles with shorter tips, but find these taller, narrower tips easier to use. You have to cut the tip yourself, which can be tricky to get right, but you can decide how wide the opening is, maximum is about 3 mm. You can also punch through the top with a pin, for a narrow opening. I like that the nozzles are not as narrow as needle tips, but still longer/narrower than the stubby nozzles and the bottles are not as tall and narrow as unicorn bottles.The caps don't stay on very well, so I would not use these for carrying e juice around. The bottles are also very soft, so maybe not ideal for rigorous use - probably not for children's activities, for example.The funnel is very dinky - for e juice around 55% VG, it works fine, but maybe too tight for very thick juice. Measuring beaker holds 20 ml, with 2.5 smallest increment. The bottles are marked with 20 ml increments, and when holding 100 ml, there's plenty of room for mixing. Labels are not great, start peeling off within days, but I use a strip of Scotch magic tape as labels, so wasn't bothered anyway..On balance, cannot recommend these, as there are options that don't cost much more and perform significantly better.

These are perfect bottles for storing eliquids in, and are great for dispensing into a top filled tank too, because they are very easy to squeeze, so even the thickest liquids present no problems.They are also great for mixing, due to having easy to see graduated markings from 20ml to the 100ml line, in 20ml increments, and there is enough air gap at the top for you to give the contents a good shake.However, as said by RebelY0gi, they do not have child proof caps, so if that is important to you, they might not be your best buy.

The small caps keep splitting and leaking,not happy with the product.

these bottles are spot on very good for making your own vapes good quality well pleased

Got these for mixing glues, paints and glitters for my grandsons crafts and they’re ideal! Easy for smaller hands and no messy spills

Die Flaschen sind wie beschrieben. Die Verschlusskappe für die Tropfspitze geht beim ersten Mal ein wenig stramm drauf, danach ist es einfacher.

Les flacons compte-gouttes Hinrichs de 100 ml sont parfaits pour stocker et doser des liquides, notamment pour mon e-liquide. Le plastique LDPE est de bonne qualité, flexible et résistant, ce qui facilite le pressage sans risque de casse. Le kit complet avec entonnoir, gobelet gradué et étiquettes est vraiment pratique pour un remplissage propre et une organisation facile. La précision des gouttes est idéale pour doser correctement, et les bouteilles sont totalement étanches. Je recommande vivement ce produit pour ceux qui manipulent des liquides de manière régulière !

Wanneer je het topje eraf knipt, past het dopje er niet meer op.

Le ho acquistate per i liquidi della sigaretta elettronica. Sono belle e pratiche. Un po' scomodo il tappo perchè non sempre chiude e, comunque, non chiude in maniera ermetica quindi, se rovesciate le bottigliette, perdono. Comunque sono soddisfatta

Buen producto