Pro-Bike Tool Mini Bike Pump with Gauge - Fits Presta & Schrader - Accurate Inflation - Mount Kit incl. - 100 PSI

Great little pump. Easy to use and small and lightweight so fits on the bike using only an Allen key. Quick to inflate and the flexible hose means no air is lost if the pump wobbles a bit when being used. The small pressure gauge gives you a good idea of the tyre pressure so you know when you've inflated it enough to cycle home. I haven't managed to fully inflate the tyre to the correct pressure using this pump as it's a bit hard going towards the end but it's efficient enough to get you back on the road in a matter of minutes. The Velcro strap gives you piece of mind that you won't lose the pump if going over bumpy ground and means you can tighten it in the bracket so it doesn't rattle either. Best of all it looks good and is sturdy - well engineered and great piece of kit for the bike.

The pro bike tool is just that a professional bike tool . It's compact and lightweight weighing only 147g . Fast and easy tire inflation so your not pumping forever with some of the smaller pumps you can get.It's high pressured going up to 120psi / 8.3 bar .The hose is flexible so less chance of breaking a valve. It's got it's own integrated pressure gauge for perfect inflation.It's comparable with both presta and Shrader valves . It includes it's own mounting bracket and it's got a sturdy strap so you don't have to listen to it rattling around as you rude along .So all you need to do is remove your dust covers from the top and bottom of the pump . These are another good thing as when your going through water or getting rained on the are protecting the insides from the damage water can do.Then you just unscrew the hose from the pump handle attach the side you want depending on your tire valve , attach to your open valve and hey presto start pumping it's surprisingly long for this cute little pump . In fact it's so quick I've pumped up both bikes in no time at all.

A well built, smooth operating and compact little pump. It's great too use, however was quite a mission filling up a new tube from empty. I've never used a pump like this before, usually only have my tower pump. It takes some considerable pumping to get a tyre to ny mountain bikes usual 65 PSI, but as I hope to only use it away from home in emergencies, this is not a problem. Its a great pump.

Is it worth that extra money your asking your self? Id say "yes" its a really nicely made product, robust, strong, well designed, easy to mount to the frame, took me seconds, well strapped in to!! It snaps onto the clip it comes with nice and tight, plus and extra strap to make sure...The preassure gauge on insert component, is accurate and quite important these days with top end bikes like mine, i like to know what pressure im running, i used the pump and put a certain pressure in the tyre, then i put my top of the line pump on to compare pressures, it was like for like👌 as soon as i touched this item and picked it up, i smiled straight away! Its that obvious that its a top made product, very pleased with this little pump, nice to see good quality items can still be made and found in the world👌😁👌

I wanted a pump to fit easily in a bag rather than leave it on the bike. I found two similar products, one of which was a 'mini' pump and this one which was not so described. It is well made and a very effective design. It is tiny compared with traditional pumps and is much sturdier. The gauge is rather like a mechanical car tyre pressure gauge, but is in-line with the flexible hose.I found that my rear tyre pressure was lower than advisable and needed to change from 70 to 80 PSI. Five or six pumps were all that was necessary. I think I might use this on my old racing bike.Two minor points, the wheel may need to be rotated to see the pressure markings (Bar or PSI) on Schrader valves. Once the connector is tight, the gauge marking to connector relationship is fixed. The other is that the plastic bike mounting clamp provided is only suited to certain frame designs. The latter was, of course, of no interest to me.

As others have stated, the pump is beautifully made. There is no doubt about that! It really is nice to behold and to handle. I have seen perfectly serviceable student microscopes that were not engineered or finished half so well as this little pump.At first I was thrilled.... until I came to USE it, that is. Then I did run into problems...1) I couldn't connect it satisfactorily to the Presta type valve of my tyre's tube, despite screwing the connector a long way down on the valve stem. Indeed, I got the feeling I was actually closing the valve up again by the act of screwing on the connector itself. I don't know this for sure. I just know I couldn't get ANY air in at all through the Presta end of the connector.Fortunately, that changed when I swapped to the Schrader end of the connector, which I was able to use by means of an adaptor I already owned. With the Schrader adaptor on the Presta valve I could see before connecting the pump that the valve was still in the 'up' position, and therefore capable of admitting air.2) Whilst I could get air into the Presta valved tyre with the Schrader connector and an adaptor, there was no way I could raise the pressure above about 40 PSI, as indicated by the built-in gauge... (and confirmed by gauge on separate foot pump). I tried strenuously to get to higher pressure for quite some time; for about 25 minutes, in fact.. in three-minute or four-minute bursts of vigorous pumping action.But, no go. I just couldn't do it.Because I know how hard I tried to get to the 60 PSI mark, I am quite surprised if anybody could ever reach the 120 that is claimed for this pump.It happens that, although I was aiming for a pressure of 60, just 40 PSI will suffice as a get-me-home without damaging the tyre.3) Because of all the effort I had put into pumping, I discovered the handle is pretty uncomfortable in use. Not only does it not have a fold-out T-bar design to spread the load across the palm of the hand, there isn't even a smooth end to the handle to push against. Instead there is the threaded boss where the connector tube goes inside, and that gets to be quite sharp and painful after the first two or three hundred high-strength pushes! Neither can the captive rubber dust cap be used as a cushion, because it doesn't fit when the connector tube is not inside.So, although the pump is very nicely made, and the little storage holder is also pretty good, I cannot honestly recommend it... well, unless you are riding on Schrader valved tyres run a bit on the soft side ??

I've only had this about 3 days. I bought it as an emergency inflator for my motorcycle. I have a battery powered tiny compressor but that lives inside one of my side bags and obviously the day I get a flat on the road will be a day I took off the bag for some reason.Anyway, all I can comment on is:Perceived build quality - Excellent, feels rock solid, nice texture, great feel. Inflator tube also looks very good.Appearance - Looks Great. I went with the gunmetal-ish color and it's very attractive. Not a criteria I cared about but I thought I'd mention it for those who might care.Ease of use - Very straightforward, getting the tube out, attaching it and then attaching the end of the schroeder valve onto my bike's tire was cake. bonus points for it letting less air out than any of my other pumps or compressors when attaching to the valvePumping performance - For it's size it's phenomenal. About 100 pumps to go up 0.5 psi on my motorcycle tire once I had it up to 35 with the compressor. If you are buying this for a bicycle I think you will be very pleased. For a motorcycle if you had a full on flat you should expect to pump it probably north of 1,000 times to get to pressure (much less to get it to road-worthyness to then ride to a gas station to get it to pressure) but understand that this is a last resort type scenario and I'm prefectly satisfied with performance.Durability - hard to say but I will say that the fact that the tube lives INSIDE the pump is a fantastic design feature which should substantially increase lifespan for that portion of the pump.The only thing I will say is that in retrospect I wish I'd bought the version of the pump that doesn't have a built in "pressure gauge." The pump is so great at not losing air when you attach it/detach it that there is little to no benefit to that very crude indicator and I suspect that the day this pump fails it will fail at one of the joints on the hose... the no-pressure indicator hose version would have half the failure points.

The Pro Bike Tool Mini has quickly become an essential companion on my cycling adventures. Its compact and lightweight design is incredibly convenient, fitting snugly in my saddlebag or jersey pocket. When it comes to performance, it truly excels. The precision and ease of use while making on-the-go adjustments or quick repairs is a game-changer. The build quality is top-notch, and it feels sturdy and durable in hand. I've used it for various tasks, from tightening loose bolts to adjusting my seat height, and it has never let me down. The ergonomic grip makes it comfortable to use, even for longer periods. If you're a cyclist who values portability and reliability in your toolkit, the Pro Bike Tool Mini is a must-have. It's a versatile and well-crafted tool that has greatly enhanced my riding experience. I highly recommend it to fellow cyclists.

Ich habe die Pumpe zu einem günstigeren AMAZON Preis bekommen. Dann habe ich zugeschlagen. Die Pumpe pumpt und ist von der Haptik und Optik echt schick. Passt in den Fahrradrucksack und pumpt den Reifen auf. Was man natürlich nicht erwarten darf das es bei einem 27.5x2.6 Zoll Reifen superschnell geht. Da die Pumpe ja nur zum nachpumpen ist. Oder wenn man wirklich einen Platten hat :-)Für das ist sie auch gemacht. Und dafür ist sie super. Ich würde sie wiederkaufen :-)

Ero alla ricerca di una pompa di qualità per la mia MTB. Avendo voluto sempre risparmiare, molte delle pompe che ho posseduto in passato hanno sempre avuto vita breve e quasi mai si sono dimostrate efficaci ed efficienti.Ho pertanto deciso di spendere qualche euro in più e dopo aver letto le innumerevoli recensioni ho deciso di acquistare questa pompa della Pro bike. Non posso fare altro che confermare la stragrande maggioranza delle impressioni positive.La pompa è ben costruita così come ottimi i materiali utilizzati. E' bella da vedere, è pratica e soprattutto efficiente ed efficace. Per le pressioni che le mie gomme necessitano (max. 3 bar) questa pompa è in grado di erogare una potenza di gonfiaggio più che sufficiente (max. 8 bar).La manichetta flessibile (che si nasconde completamente all'interno del corpo pompa) consente di gestire con praticità il gonfiaggio delle camere d'aria con le due tipologie di valvola più usate (Presta e Schrader). la staffa a corredo vi consentirà di fissare la pompa al telaio della bici nelle modalità standard.Ottimo acquisto. Ottimo prodotto!

Reçu dans les temps et bien emballé . J'ai étai surpris par le niveau de qualité de cette pompe , la finition est superbe , c'est un très bel objet .Elle est très solide , La possibilité de pouvoir lire en BAR et en PSI est vraiment pratique .J'ai pus gonfler mes pneus de route a 6 bar sens problème , Il suffi de laisser l'air rentrer doucement sens forcer sinon vous n'arriverai pas a dépasser les 4 bar . Si vous pompez trop vite ou si vous forcez trop , la pompe chauffe et le joint interne fini par se retourner , alors allez si molo et vous arriverez a gonfler a n'importe quel pression toutes sortes de pneus . Je vous recommande ce produit qui pour ma part m'a servi dans mes voyages en vélo sens avoir eu aucun problème avec cet article . Bonne achat . Jean 34 .(( Retour d'expérience après de multiples utilisations pendent mes voyages en vélo .Je n'ai pas vraiment eu de problème avec cette pompe , elle tien le coup malgré un usage intensif . IL faudra juste ne pas laisser le raccord trainer dans la poussière et ne pas laisser rentrer des saletés dans la pompe , sinon elle ne fonctionne plus ( Au cas ou , il faudra juste la démonter pour la nettoyer a l'eau et la graisser )Je peu vous dire aussi qu'elle est très solide , puisque un motard a roulé dessus par accident et cette pompe s'en est sortie indemne .Conclusion : Très bon matériel , solide , pratique et peu chère au vue de ces qualité étonnantes .Jean 34 .