Adjustable Double Bubble Door Sweep & Draft Stopper

Perfect fit, easy to install. I'm very pleased with the item.

Exactly what I needed!! Our new front door had a bad draft underneath and this part fixed it up perfectly. Easy to install, looks great inside and out. The cover over the screws is an added bonus, looks like an original part of the door

Top notch quality with a "no cutting required" installation. The price is a little steep for being made of just two types of plastic. Overall, I'm pleased with the product because it stopped any drafts.

Easy to replace an existing door sweep. It fit the door perfectly and did not need to be trimmed. It comes with a removable cover for the internal side to cover the screws

This sweep fit my door perfectly and provides a good seal without needing to trim.

… but, I wish they wouldn’t have cut the outside so short. This is for our inside door leading to garage. Was not able to use the rain guard part to cover up how short they cut the other side. Had to drill new holes since it doesn’t line up with the original holes. It makes the door hard to close even pushed all the way up. The contractors who built our home put the door in super crooked since they also didn’t put the drywall in straight the door frame is not square. We added new hinges and new insulation plus this. Outside of machining issues and being cut too short on one side, it still looks better than what the contractors who built it gave us. Hoping over time the rubber compresses a bit so we can close the door normally again. It seems to help with drafts but is really a tight fit and makes the door hard to close.

Rating: ⭐⭐⭐⭐⭐ (5/5 stars) The Adjustable Double Bubble Door Sweep has been a game-changer in our home, especially when it comes to teleworking and ensuring our baby's uninterrupted nap time. With my wife working from home, quiet phone meetings have become a must, and this simple yet effective solution has made all the difference. Sound-Blocking Wonder: ⭐⭐⭐⭐⭐ This door sweep is a sound-blocking wonder! It has successfully kept noise from traveling under the door, making my wife's teleconferences virtually silent to the rest of the house. No more accidental wake-ups for our precious baby during important meetings. Peaceful Teleworking: ⭐⭐⭐⭐⭐ With the Adjustable Double Bubble Door Sweep in place, my wife can comfortably conduct her phone meetings without worrying about disturbing the household. It has created a peaceful and productive teleworking environment, allowing her to focus on her tasks without any added stress. Easy Installation: ⭐⭐⭐⭐⭐ Installing this door sweep was a breeze. It required no special tools or technical know-how. Within minutes, we had it in place, ready to do its job. It's an effortless addition to any door that provides significant benefits. In conclusion, the Adjustable Double Bubble Door Sweep is a small investment that delivers big results in maintaining a peaceful home office environment. It has made teleworking with a baby in the house much more manageable and stress-free. If you're in a similar situation or simply need a sound-blocking solution, I highly recommend this door sweep. It's a five-star product that has improved the quality of our work-from-home experience.

Probably the fastest and easiest home improvement project I've ever done. (Okay, maybe replacing an outlet wall plate is easier but this was close.) The whole thing was done in close to 15 minutes, including rehanging the door and putting away my sawhorses and tools. Here's what you do: 1) Be sure you're buying the right size for your door. 2) Pop the hinge pins, and lay the door on a surface you can work on. 3) Remove the old sweep. This may take some doing, depending on yours, but mine pried right off. 4) Slide the screw cover panel of the new sweep off its track. (No need to pop it off or back on, which might be where some people have reported this being difficult. It's not. Just pull lengthwise and sliiiiide it away.) 5) Dry fit the new sweep, screw holes facing INSIDE the house! 6) Rehang the door. The sweep should stay in place as you do. If not, try a little painters tape to hold it in place? 7) Adjust the sweep to the level you need for a true fit, then set the screws. I recommend starting with the two end screws. This allows you to micro-fit the middle to perfection. The screws self-tap, but if you have a metal door like mine, you may need to lean into it at first. 8) Slide the decorative screw cover panel back on from the edge of the door. Again, don't try to "clamp" it in place. Sliiiide it in like butter. 9) You're done. Put away your tools and enjoy the rest of your day. The only downside to this whole process is that I was done so fast that my neighbors probably didn't even have a chance to be impressed with my door-hanging skills. Still, thanks KS Hardware for designing something that's a breeze to install but will keep the breeze out!

Este guardapolvo Sí evita el paso de polvo y de alimañas, a diferencia de otros que había probado.

I've gone through a few of the flapping fin solutions from a local store. The last time I bought two of them and just used the second one after only two years with the first. The second one started to give up almost immediately. It's almost like the rubber atrophied and within the days I could see the fins breaking off and dragging on the floor. So frustrating. I feel like the standard for sweep is built with find that are just too long for the gap under my door, but there's no option B. Initially I hated the price on this one but the minute I got it installed in the door I realized it fit like a glove. There was no longer any resistance at all when I opened or closed the door but the seal was absolutely perfect. Magic. I didn't even have to trim anything at all... Maybe the Amazon elves came and measured my door before shipping. Worth every penny.

None of the big box stores carry an underfoot bottom seal for extra wide doors (43 inch). This high quality bottom fit my door perfectly without cutting. Installation was a breeze, under 10-15 minutes. Couple of tips: 1. Once your old guard has been unscrewed from your door, use a Flathead screwdriver to unstick your old guard by hitting it (not the door) from the top so that it comes out easily. 2. I agree with most reviewers that sliding the screw cover over the installed bottom is difficult and almost impossible without damaging it once only a 2 or 3 feet are left to slide. However this simple tip will help you do it safely in no time (see picture) :Grab a block of wood and line it up against the protruding end of the screw cover and use a hammer to hit the block against the cover a few times to get it perfectly aligned. You will be amazed at how quickly this safely gets the job done. You do not need to hit the piece of wood too hard, a gentle hit gives it that homogenous push that is required to finish the job. 3. Use a piece of cloth and put about a quarter size amount of Vaseline in it and rub it a bit. With the door open, evenly distribute the Vaseline around the rubber part of the bottom, making sure you do two passes with the same cloth (no extra Vaseline needed), don't miss the edges. This will ensure your door opens and closes nicely without excessive friction. Finally, I am glad I replaced my 14 year old bottom guard with a product that seems to be of much better quality (time will tell). I can say this is a much more energy efficient solution. The insulation it provides is readily visible and it feels like it when my door is being closed you feel it's sealed from the exterior elements which is key in cold Canadian winters.

Facile à installer et bonne qualité comparativement à ce qui se vend dans les quincailleries, le seul problème, assurer vous de l'espace que vous avez entre le bas de porte et le seuil, sinon, la porte sera difficile à ouvrir, parcontre l'étanchéité est vraiment bonne, j'en ai acheté deux en 2025

I've never bought another door skirt. Maybe this is crap? Thing is though - it arrived on time, fit perfectly, felt "premium" and does exactly what I need it to.... so..... to me, it's met the standard.