20Pcs Combo Bolt Extractor Kit, 6-Point Offset Extractor Wrench Set, 6Pcs Metric 8-19mm, 14Pcs Eazy Out Bolt Extractor Set, Impact Socket Remover for Stripped, Broken, Rounded Bolts & Nuts

I received these at the perfect time!! So far iv only had to use the 10mm end but it worked perfect for stripped and non stripped bolts! Saved me time from having to switch between a bolt extractor and regular socket!! Definitely worth the price!!

Used these on my power steering pump to remove the round off bolts. These wrenches work great and I definitely recommend.

This wrench set is a good value for the price performance ratio. (At least when I bought them) It did the job and did not damage the bolt too much... as in not much at all. None of my sockets or regular wrenches would get the bolt out. This did. And did less damage than everything I used before. I am sure there are better versions out there. However, this worked for me and had an attractive price. Thanks.

Packaged well. Very nicely finished quality tool. Saved me a lot of work and frustration. Solidly gripped a rounded off nut in a tough to reach location. I was able to apply enough torque to turn it off. Very pleased!

May brothers vehicle had a super tight oil pljg requiring me to have to utilize one of these wrenches. And boy the work nic3ly

First of all, these wrenches are directional, in the sense that the correct side must face up depending on whether you want to loosen a bolt or tighten a bolt. If you have the wrong side facing up, it can round the head of a good bolt or do further damage to an already rounded bolt that you are trying to remove. It’s kind of similar to a ratcheting box wrench that you have to flip over to use in the opposite direction.Look at the pictures I have attached and you can see that the six teeth point in one direction, either clockwise or counterclockwise depending on which side of wrench head is facing up. Make sure the flat side of the wrench head is facing down if you want to remove a bolt (or an already rounded bolt). Do the opposite to tighten a bolt.Five stars for performance. One star for excluding any directions.

I was iffy about using tools from Amazon. I will say it did the job. I had a rounded off nut under the rear end and it was in the most difficult part between the body and differential and it was such a tight squeeze that a socket would not work. The quality actually was good. It will be my go to for anything I can’t access with a socket for sure

I got these to help with an auto repair I am doing. They got the first bolt and stripped the corners off the next three. I am going to try a couple more and I will probably have to see if there is an SAE set to match that may span the gap between the sizes. These may be making their way back if they don’t perform better on the next bolts.

Great six point set less chance of rounding off stubborn seized bolts better leverage with longer length.

There cheap and they don't have the tolerance for rounded bolts there ok for good bolts but rounded bolts not a chance

Used on one job so far exhaust manifold repair very tight area to work clamp right onto the 10mm bolt didn't slip off I would buy them again

I like the set

Je m'en suis servi pour enlever un boulon de drain d'huile moteur endommagé et c'est super efficace !!!