Phanteks Frames, White, Medium

Works well just watch out for your ram clearance. I’m sure it was in the specifications and I should have checked but I was unable to top mount this rad in a Phanteks P360a case with the ram I have. The fans have a “rgb” halo mounted on top which make the whole unit just a little bit thicker which was the difference for my case. Was able to rearrange things and front mount the radiator so it all worked out ok and the cooler has been running flawlessly. But I suggest you check the specs for your case if you are looking to top mount.

I'll probably end up updating this to 5 stars but for now it's 3 because of 2 issues -- both fans have a very loud bearing that squeels after 1000rpm and the magnetic infinity mirror does not stay on (the magnets are strong, just don't make contact with the pump to hold it on)This will probably end up being 5 stars because I emailed Phanteks and within 2 days for a replacement for one of the fans and the pump cover. If I'm being honest.... I did already order Noctua fans and will probably just use those. But it's still very nice they were so quick to replace the fan and cover.The whole things only been running for 2 days and with the fans controlled under 1000rpm the whole thing is very very silent.EDIT: After replacing the Phanteks fans with the new ones I have zero complaints. I still opted to go back to the Noctua fans, since I had them, but I still can't complain about the product as a whole ---- Updated to 5 stars for the product and customer service was very helpful with shipping out new fans!

Bought this to replace my failed Enermax 280mm AIO from 2017 that was mounted to an 8700k running at 4.8 Gz. With the previous AIO I was getting 38c idle temps, 48 to 50c light duty, 65c gaming and a peak of 90c on Prime 95. After lowering voltages a little I got the max down to 85c and 35C idle temps. I figured that was the best I could get without investing in a better cooling solution.Once I installed this unit my idle temps were 31c, light duty stuff an around 35c, gaming 45 to 50c, and max temp is 69c on Prime 95. Even with the testing program "heavy load" which is more stressful than Prime 95 I was still just at 70c. What a difference.Recommend using CPU fan header to power PWM pump, or additional CPU fan header if your MB has one. Daisy chain the two fans which they're already set up for then use the extension to reach the other CPU/or other fan header. Being able to set your pump and fans to run at lower RPM's keeps things quiet and efficient.Pros - quality build - slim water block, clearances fine even with all DIMM slots populated - no RGB on fans (Not everybody wants RGB!) - very tasteful infinity mirror on removable magnetic water block cover - doesn't require USB which is a huge plus - the single 3 pin RGB (D-RGB) which is the same as 5 volt addressable RGB cable comes out of the removable water block cover if you choose not to use the lights in the infinity mirror - Phantek fans are legendary for their static performance and CFM at low decibel levels - PWM controlled pump (I have mine set at 60% speed which is ultra quiet and more than sufficient, hooked to CPU fan header so it will ramp up if needed) - Fans can be run at low RPM and still cool well because of great static pressure qualities - comes with everything you need plus an extra tube of thermal paste.Cons - could have used black fans on non RGB "MP" versions - radiator a bit long, check you case for fit. If it's not too long then that's actually a pro.I watched reviews and this unit cools newer high end CPU's just fine. Good deal for the price.

Very fast delivery, easy installation, working well, and looking fantastic.

Great unit for SFX builds

This is just one of the best looking AIO and the fans are really good at cooling