SABRENT 60W 10-Port USB 3.0 Hub Includes

Best purchase I’ve ever made for my setup besides like lighting and mounts, this right here is 10/10, had it for maybe 8 months so far (late review) but it’s absolutely amazing, and I know it’s not too demanding from my pc, I originally bought this for my laptop, but I’ve upgraded since then and it was worth every dollar, super useful and functional, has more than enough usb ports there’s just so many usb ports, super good port, along with the charging ones, super great power usage, and I can turn off and on the ones I want to use whenever, super light and it even looks nice!

I ordered the Sabrent 60W 7-Port USB 3.0 Hub + 3 Smart Charging Ports in order to try to solve my desktop rats nest situation. I really like the unit thus far as it is performing as advertised and easily and quickly handles any USB cord or device that I have thrown at it. I have had no problem with connectivity or performance issues, as I have read in some of the reviews, i.e. dismounts. There again, I am not using the unit for external hard drives either. You do have to hook it up correctly and use a little common sense though. The issues that I am seeing with the 4 port hub, and using flash drives ..... c'mon people, open your eyes and brains. Sabrent has done a great job on spacing the plugs. It is, however, impossible for them to anticipate what a flash drive manufacturer is going to pile on top of the USB plug with regard to the shape of a casing, which may cause the drives not to stack well in the side-by-side configuration. Flash drive manufacturers are notorious for making their cases either too fat, or adding a case that curves towards the end such as the Sandisk Cruizer drives. That is Sabrent's faule, so don't give the hubs a bad rating for something that you could have anticipated if you would have just used your eyes and brains .... LOL Flash drives have always had problems fitting into tight spaces because of these case issues, whether you are plugging them into a hub or simply into the back of your computer. If you think this may be an issue with flash drives that you own, then use your common sense and order the Sabrent 60W 7-Port USB 3.0 Hub. That unit stacks them vertically, not horizontally edge-to-edge and alleviates the issue. I do have two suggestions for Sabrent which would make this a 5 star product.First, include a longer USB cable! Second, the blue lights that indicate that the plug is active, are much to hard to see. If you are viewing them from more than a 45 degree off angle, you can't even really tell that they are lit because the light is slightly recessed. Also, in low light conditions, it's hard to see which plug you are plugging into, or you may easily hit the switch for the plug either above or below your intended target. This caused me minor problems at first so I just keep a mini maglight handy to see it clearly. The perfect solution here would be ........... illuminate both the socket and the perimeter of the switch, and then connect them with a blue illuminated line. Having explained those minor issues, this is a great product which I would recommend. I have mounted the unit to the side of my hutch via double sided foam tape. In addition, I have purchased two of the Cable Management Cord Organizer ORICO 7 Channel Desk Cable Clips Wire Cord Holders, and mounted them to the side of my desk top, close to the hub. This serves two purposes. First, your cables are both nicely organized and easily identifiable and accessible. No more fishing around for what fell off the desk top. Also, this provides a great strain relief for your cables, which doesn't tug on the cable plugs and sockets unnecessarily, causing wear and tear, and connection issues.

Sabrent 36W 7-Port USB 3.0 Hub I use this for writing backup files from my desktop computer to a flash drive every night. All 7 of the ports work. I wrote a script to compare the speed of file transfer between ports on this hub and the native USB 3.0 ports on the front of the computer. It's a very fast computer with an ASUS ROG Crosshair VIII Dark Hero motherboard, and those native ports are connected directly to that motherboard. The file source was an internal RAM disk, infinitely fast compared to USB. There was no difference in speed between the ports, whether the destination flash drive was a fast one or a slow one. Once a month I write five flash drives at once, and I expect this hub to handle that perfectly. If it doesn't, I will update this report. I don't need 36 watts or individual port switches, but maybe some day? OOPS - Now it's not so good. I make most of my flash drives bootable, using Macrium Reflect, so the images on the drives can be restored easily. But the ASUS ROG Crosshair VIII Dark Hero motherboard does not find those flash drives. As if they are not connected at all. The USB cable length doesn't matter, nor does the port that I use on the 7-port Sabrent hub, nor does the brand or type of flash drive. Tried 'em all. And all of the flash drives will boot up just fine when plugged in directly to the front of computer, where a short cable within the computer connects to the mobo. This not a huge problem, because I would use a front or back connection if I really needed to restore a drive. It's more of an inconvenience, because it makes it a little harder to test a flash drive. I need to get to Sabrent and see what they have to say. SERIOUS UPDATE: The review changes from 5 stars to 1 star (preferably zero). Elated and angry. Elated because I finally discovered why my computer was exhibiting so many sudden "Black Screen of Death" reboots. Angry because the cause was this Sabrent 7-Port USB Hub which was doing nothing when the reboots occurred. The reboots seemed to be random, so I had no idea what might cause them and spent good money on three (very nice) Tripp-Lite surge suppressors. I was already using a UPS for the computer itself. More important, I spent hours upon hours trying to find the problem, never imagining that it could be a device that was plugged in but not even in use when the reboots happened. I wrote scripts, attempting to repeatedly exercise non-microsoft software (VeraCrypt, 7-Zip, ImDisk) to produce the error reliably, to no avail. I kept a log of the black screens, and that did help. Finally my little brain connected the start of the black screens to the time that I purchased the Sabrent 7-Port USB Hub. Since disconnecting that, no such reboots have occurred. I do need a hub during certain procedures, but the replacement ikuai 11-Port hub has not caused reboot problems. It has other problems, and it's going back, but that's a separate review. The Sabrent hub was unquestionably the cause. However, in my opinion, the ASUS ROG Crosshair VIII Dark Hero motherboard is also partly at fault, because it should be designed well enough to prevent a USB-connected device from bringing down the computer. 2024 03 05 Another update. Maybe the Sabrent isn't the problem after all. It's definitely not "unquestionably" the cause. I replaced it with a new RSHTech 7-port USB hub, and the black-screen reboots continue. I'm stumped right now, actually starting to suspect my UPS of spikes or momentary cutouts. Anyway I think the Sabrent is OK.

Setup wasnt flawless, I had to figure out why the lights were flashing, when I plugged anything in, tried with and without the power supply, different usb-c ports, and it eventually just magically started working as i was googling firmware updates. I didn't do a firmware update but I heard my pc finally make the usb connected sound and was like no wayyyy. Sure enough, it works perfectly after just waiting about an hour. Tried on multiple different computers as well to attempt to rule out the issue. Its been working fine since, I even unplugged and plugged it back in to replicate the issue and potentially return it but I couldnt. Hope its good from now on!

I've had the Sabrent 10 port USB hub for a short time, and I am impressed with this product. I have a number of peripherals connected, and all is well. PROS: Solid build, off/on push buttons for each port with LED indicators that aren't too bright, easy plug and play setup. CONS: Unless you are using this next to your laptop, or have both your PC and this hub on your desk, the provided 30 inch (72cm) USB cable (between hub and your PC) is way too short. You'll have to buy a 4 or 5 foot (122cm plus) USB cable. I find it convenient to have the hub on my desk, and my PC on the floor, thus the need for a longer cable. This is not a deal breaker. However, since Amazon offers the longer USB cable at a reasonable price. Just so you know, the electric cord and transformer cord connect to each other, and that total length is very long...no problems here. Do yourself a favor, and spend a few dollars more to get a high quality USB hub. Four and 1/2 stars rounded up to 5 stars.

The 10-port USB hub has done me well. It has never lost power or failed to connect. I recommend splurging and getting the larger hub. I was suppressed at how many USB ports I would use at one time. A lot of my setups require USB power.

I like the SABRENT brand - I needed something quick for a VR/recording project and this fit the bill. Powered the extra lighting/recording equipment I needed. Data transfers are great too and the unit doesn't run hot like others I've had in the past. There's no setup really - just plug in what you need. Overall good price for the functionality and it tucks away easily since it's a small profile unit. Great design and looks like it's built to last.

First, a caution which applies to ALL USB hubs: more USB sockets does not necessarily mean you can use more USB devices simultaneously. If you want more USB devices usable at the same time, do some reading online about the way a PC manages USB devices. And consider plugging this Sabrent hub into a USB-2 port rather than a USB-3 port. The overall speed may be slower but the number of simultaneous ports available will be larger. It seems you can have high speed or connectivity but not both simultaneously, at least in the Windows 10 world. You may want to keep a USB 3 port on the PC empty, so it's available when you need high speed such as for a backup drive or DVD player. I am very pleased with this device! It works as advertised and does what I need, namely provides additional USB ports so I can keep more USB devices plugged in than was possible with the ports on my Windows 10 laptop. The main benefit for me is that I can bundle up the various cables and keep them all plugged in, turning devices on and off as needed via the VERY HANDY on/off switch for each USB socket. So for example I can turn the external Bluetooth adapter off when not needed. The three power-only ports are great for recharging devices that don't need to connect to the PC but do need to be recharged. The power switch for each allows me to plug and unplug power cables without worrying about eventually ruining tiny electrical contacts due to connecting with power applied. Also I don't need to find the wall-wart AC adapter for charging each device. I checked all the voltage levels at the USB sockets and all were 5.15V with only about +/- 20mV variation. These were no-load tests but it appears that the power supply is more than capable of handling the rated load. I'd prefer it if the power supply were smaller and lighter, but at least it's efficient; I don't notice any warmth. And the power cable from power supply to USB plug strip is thick and stiff, which makes it a bit of a nuisance for positioning the USB plug strip. The same can be said about the USB-B to USB-A cable that connects the USB plug strip to the PC. If these cables could be made thinner and more flexible while maintaining the required performance, I would find that helpful. Overall I'm very pleased with this product. It does what I needed, does it well, and appears to be durable. I've been using it now for a couple months.