Creality Hyper ABS Filament, Official 3D Printer Filament ABS 1.75mm for Up to 300mm/s High-Speed Printing Convenient Open Printing Material, 1kg(2.2lbs) Spool Fit Most 3D Printer(Black)

Worked perfectly no issues

I love this Hyper-ABS for prints that need a compromise on speed, finish, and durability. Once you get the settings dialed it, this filament is great for large prints that would warp with regular abs. I run it at the same temp as abs but higher speeds. It's not as high temp resistant as regular abs but it's comparable to petg temp resistance. I use this instead of petg or pla when I want a detailed print that will last. More matte than petg and more durable than pla. Not a substitute for actual abs if you need abs specs though. I use abs, asa, pa for higher temp or higher durability models. Petg for impact resistant models that need some flex. And hyper abs for anything I used to print with pla and some items I used to print with petg.

I am using this on my Bambu A1. No enclosure needed! I have had spectacular results. I didn't even dry it before use. No warping at all. Pretty low odor. Nice bed adhesion AND removal. I don't use ABS a lot, but when I need to print something that has to be very sturdy, I like to use ABS. Overall -- very pleased. I just wish it came in a few more colors....

Buena calidad de material, lo imprimí desde una impresora de marca creality y el resultado fue bastante bueno.

Was good for my project

Excelente material imprimi en mi creality hi y quedó espectacular

I print parts for cars with abs and let me tell you this filament is great even in the California summer it holds up. Yeah if you’ve never printed in ABS there is an optimal setup to make sure the print sticks to the bed and doesn’t curl up in the corners but this differs based on each printer and its location but once you are dialed in it’s perfect. I’ve tried many ABS filaments and I keep coming back for the price and fast delivery.

I have been 3d Printing for several years and have a modified Voron V2 and V0 that I built myself. I have used all types and brands of filaments, from cheap to expensive, but this one takes the gold standard for being the worst filament I have ever used. It has never worked right straight out of the package. I've dried it, I've slowed down speeds, increased speeds, changed temperatures, etc. and it is just horrible. Nearly every single time I use it, it gets wrapped up in my extruder gears requiring me to take it apart to clear it. This is the only filament that I have ever used that does this. I even keep it on the shelf and pull it out once in a while when I run out of black ABS with the idea "maybe it'll work this time in a pinch" only to be met with disappointment and disassembly of my extruder. I don't often write reviews but I feel compelled to write this one to warn others. Stay away from this.

I encourage all buyers to request a policy for circular economy adherence, so all plastic waste is collected from customers and returned to seller. Exactly like Nespresso did with the capsules. As you buy new capsules they collect your bag with used ones. The product is good but lacks the circular economy which should be mandatory!

Ce filament ne dégage pas d’odeurs forte. J’ai imprimé une poubelle a l'aide d'une machine k1c de creality. Le matériel à très bien adhéré couche après couche. Imprimé a haute vitesse (350 mm/s). Très solide, il sert a construire des pièces qui nécessite dureté et résistance a l'usure. Aucune toile lors de l'impression ni de blocage de buse. Le filament est bien roulé, il je se coincera pas durant l’impression.

Used it to print terrain for my Fallout Wasteland Warfare with high quality on a Prusa Mk3. Great finish for barricades.

Printed well on my Bambu A1. No issues with this filament.

Appears to have clogged my K1C extruder, caused stepper motor to overheat and melted the terminal to the extruder pcb board on my new K1C. I had been using 2 other brands of ABS for multiple prints with no problems. Was loving my K1C. Decided to try the creality hyper abs thinking it should work well with their own brand of printer. I went out as the print was running well for first several layers, and when I returned expecting to find the print done I saw it was only half way thru the print and giving the message the print was completed. I restarted the print only to get a clicking noise from the extruder. Tried clearing the nozzle and it was totally jammed. Took the extruder apart and found filament shavings inside and that filament had melted inside the extruder. This likely caused the motor to overheat because the connection to the pcb on the extruder was melted meaning the board would now need replacing. Will not be an easy fix.