13” X 1 1/4” 2015-2021 Road Glide Road 6 Customs Standard Apes-gloss black

Will fit 2020 Road Glide. Did not have to but cable extenders. Was able to change without having to de-pin the throttle by wire due to the connector on a 2020 being smaller than the older models. I did make a notch on the housing below the speedo for the brake cable to have more room. Was it absolutly necessary...Maybe not but I feel better with the extra room. The video on manufactures website was all I needed to guide me. First time ever doing bar on any motorcycle.

Disconnect power, fuse or battery to avoid a Dash error message. Second don’t let your lever housings tilt down to the sides, keep them level as possible! Or you’ll get a air bubble into the brake, clutch system or both and have a catastrophic failure while riding , you’ll know it when you have no brakes or clutch goes numb. There is still air trapped in the reservoirs! Now install was easy and I did not need to remove wires from pin housings. Wide tube allowed wires to fit. Don’t loose orange rubber gaskets on the connectors FYI. I also disconnected the lines from a clamp located on right side (see pic) got way more flexibility and reach there is also a thin cable ABS? Bottom wire in pic. Unplug and route to inside of lines or it will rub on outside plastic, tilt wheel to far right and access disconnect plug way in the back not the forward disconnect FYI. For added piece of mind I cut into the inner dash housing about a 1/2 inch, this allowed the lines to not bind and added even more range of motion. Also tape the bars so they don’t scratch, easy to scratch. I really wanted 12”inch bars and was worried 13 was tooo high I’m 5.7! Once installed worries were gone. Better turning leverage.

Bars arrived in perfect condition. Packaging so bars couldn't get scratched. Very easy install on a 22 Road Glide Special

As stated above I am 6'4 tall with a 34 inseam and the installation was done on a 20/20 Harley-Davidson Road Glide. The windscreen is absolutely perfect and my eyes rest around 2 to 3 inches above the upper edge of the windscreen. Wind buffeting is minimal at best and I am able to ride without glasses if wanted. If you are a taller Rider looking for a windscreen that will keep the wind out of your ears and out of your face and you still be able to see over the top edge this is the one for you. Great product!

Great bars and great price. Finish (black) is perfect and good quality. They fit my 2019 Road Glide Special as advertised, can’t be beat for the price.

Review is not being written right away. I have had these bars installed and ridden about 1000 miles before doing the review.To start with the bars were shipped and delivered ahead of the provided arrival date.The powder coating was excellent and there were no issues found.Bars were protected very well to avoid shipping damage and vendor provides plenty of notice not to get crazy removing the protection to avoid damaging the coating.Installation video by Road 6 from their website is an excellent reference.Bars are very comfortable and installed easily.Craftsmanship of the bars was top notch and you will not be disapointed at all with the comfort and quality of these.

Great product with timely delivery. This bar is ideal for those who are looking for a simple and classic style rather than the meat hook bars. I have a 2019 road glide special, there are 2 videos that I used to help me out among the way on YouTube. The manufacturer provides a link to one of the videos with the package. The bar in the manufacture video is not the exact bar, but just watch the other video by KST. Between the two, it gives you all the info needed. All is correct about cable lengths. Clutch line is connected on one more spot along the right side rake, just make sure you disconnect from there. Also disconnect the main fuse before you start. Overall 3 hour job by myself, beginner to intermediate level.

15 Road Glide and these bars fit perfect with no extensions needed. I just watched the video as I installed and took me about 3 hours and some change. Took a couple rides around the block to make sure I liked the fit. Video was really easy to follow. I had an issue with my throttle when it came to using the paper clip. It wasn’t working for me so I carefully removed the whole cover so I could reach in with a small flat head. Everything the dude says in the video is spot on. My buddy who’s a mechanic was supposed to do them but he went to the desert the weekend they arrived so I couldn’t wait and followed the video. He couldn’t believe I could do them myself with the video. That’s how good it is. Would and will buy from Road6Customs again.