ALL-PRO REV235F Revolve LED Twin Head Flood Light, 2100 lm/3500K, Bronze

I have been considering buying this light since it first came out several years ago, but the high initial price at the big orange store (over $100) kept me away. I bought this one discounted from Amazon Warehouse (open box return, nothing wrong with it) at a FRACTION of that! My number one lighting concern is color. 3500k is IDEAL, it's not amber (incandescent/27-3000k), not "cold" white (fluorescent shop light/4000k), and not bluish (daylight/5000k), and this is the only outdoor fixture I could find that fits the bill. Next is appearance, I posted a pic of my old fixture for size comparison, not only is it sleek compared to a triple gooseneck fixture, it's a touch smaller than I expected. If you trace it's footprint on a piece of paper (which I did to make a template for drilling holes and positioning it), it fits within the page except for a small part of one corner. Only negative is it's a little heavy (5-7 lbs I'm guessing), which makes for achy arms during install. Get all your wiring and brackets done first, then lift it and screw it into place at the very end. They knew this would be an issue so they put a modular connector on the wiring and give you a matching modular pigtail to attach to your house wiring, so when you're ready to install you can quickly plug it in instead of fiddling with wire nuts while suspending the fixture (smart). I should mention, if you like this sleek look, they make other versions, brown vs. white, 2-lamp vs. 3 lamp, photocell vs. non-photocell, so whatever your specific needs are, ALL-PRO makes one that will work for you. I just love the low-profile look of it that doesn't draw attention to itself.

These are a little different than your usual soffit mount security lights. I have one that has been in use for 2.5years and it is still in good shape. I recently order three more to cover my entire house. The three LED sources can be rotated horizontally for the coverage you need. Mine are mounted on the corners of my house so I can have light coverage on both sides as well as the center area. The case is a single piece of solid cast/machined aluminum with inserts for each f the three LEDs. The low flat profile means it is less susceptible to damage from high winds or vandalism (there is nothing to grab to pull at). The light is bright and a pleasing color.The only negative is that the installation is made difficult by the very short leads and somewhat difficult mounting alignment approach. They provide a connector with short pigtails for the hot and neutral leads. Unfortunately the ground lead is also short and must be screwed on while holding the fixture close to its final install position. The mounting screws are conveniently captive, but they must be aligned with the mounting plate which is hidden by the fixture body. The dimples and sockets provided to aid this alignment are not real helpful since they are close to the power and ground wires and could be accidentally pinched between the mount and chassis during alignment. Add the weight of the solid fixture and installation gets challenging.Given everything I am very happy with the product and the light it produces. Happy enough that I have installed 4 around my house.

These are great. I love the low profile look, and the amount of efficient light they produce. I also love the adjustability of each individual light. The Eaton method of installing lights is very clever. It should make the job easier. I found the actual installation of these a bit challenging. They are a bit heavy, and the mounting screws are too short. Holding the fixture up while searching for the mounting holes was frustrating. I needed a second set of hands on 2 of the 4 I installed. I hope they are reliable, because I love the light.

I put this on the ceiling of my 16x24 covered deck and it lights it up like daylight. I do a lot of grilling out there and don’t have any trouble seeing to do that now but it is too much for mood lighting. This is a very heavy light but easy to install as long as your mounting box is not recessed too far up in your ceiling otherwise you may have to get longer screws as some have inticated here

bought a flood light with motion control X 2.. it is a 2 light flood that has no motion or dusk till dawn feature.. I will use both as regular flood lights ..

The motion detection is really good and my garage driveway lights up well The sleek design blends well with the garage. It's not as bulky as other products I have seen.

For being made in China, the light seems to be very high quality.Installation was a breeze, only 4 stars till I can check the longevity,But for now I am very happy with the purchase.

The light works great and looks great. It is such a good light, I plan to replace all five of my outside security lights with the Triple Head (4) and the double head (1) flood lights.