JJC JSC-2 - Flash Sync Shoe and PC Socket

Works pefect

So my set up is Yongnuo RF603 C3 transmitters and the Yongnuo Y560ii or Y560 iii. I wanted to use a flash wirelessly with my Yashica Mat 124G so I ordered a PC Sync Male to Male cable and a Pixel Hot Shoe Converter. The Pixel had 4/5 star rating but did not work for my set up. I brought this today and it worked immediately. I think this would work for pretty much any camera that does not have a PC sync cable. You won't be able to use any other modes between your flash and your camera apart from triggering the flash. My set up is all manual so triggering the flash is all I need, however if you are using digital cameras and want to use ttl/ettl; you will have to look for something else.

Cheap, but do the job, I carry spares of these as they break very easily, usually the camera connection cable weakens the adapter where it connects and it eventually fails, other than that they work fine

OK, the build quality might not be the best, but it is extremely cheap. What I discovered is that this works on 3 different camera brands and as my strobe came with a cable, I can now trigger it with any camera from one item. The shoe on the top allows a wireless release to be stacked on top, with a cable to the side of the camera... which works with all cameras... I am very happy with this product!

Didn’t work on my canon R50

Fully met my needs. PC sync with no hot shoe flash connection.

Just what I wanted

It done it’s job

SLITTA UNIVERSALE CON SOLO POLO POSITIVO (PIN CENTRALE TONDO) E NEGATIVO (LAMELLA SU 3 LATI): in questo modo è possibile rendere "UNIVERSALE" qualunque tipo di flash dedicato. Nel mio caso: 1) usata su PHASE ONE DF+DORSO P40 mi ha reso possibile l'utilizzo in MANUALE del flash cobra CANON SPEEDLIGHT 580EX e del flash macro CANON MT24 - precisione meccanica sulla slitta pressochè perfetta e, grazie alle mollette laterali, per il momento abbastanza dure, ottima resistenza alla fuoriuscita accidentale; 2) usata su PANASONIC LUMIX GH4 + OBBIETTIVO MACRO OLYMPUS 60mmF2,8 mi ha reso possibile l'utilizzo in MANUALE del flash macro CANON MT24; in questo caso leggermente + duro l'inserimento e il disinserimento nella slitta panasonic, evidentemente un pò minorata. Altro vantaggio: possibilità di ulteriore uscita sincro laterale per pilotare contemporaneamente i flash da studio. Ottimo venditore tedesco che non mi ha fatto pagare i 4 euro di spedizione avendo acquistato in contemporanea un paraluce JJC equivalente all'Olympus LH-49 per il 60macro. Complessivamente: otttima fattura e ottimo prezzo.

Ce petit adaptateur marche tres bien. La construction est très simple. J’avais un besoin extrêmement spécifique pour le quel j’ai pas trouvé de produit: J’ai un flash Godox Lux Master Retro. Pour le synchroniser en mode automatique sur des appareils argentique il utilise une cellule qui va dans la “hot shoe”. J’ai des appareils argentique ancien qui ne propose de synchro des flash que via une prise “PC sync”. Leur “cold shoe” est en metal. Et donc elle court-circuite un flash en hot shoe. L’adaptateur JCC s’ouvre en retirant deux vis. Il est facile de retirer le contact central et le dessouder. Ceci transform cette adaptateur en “cold shoe + PC => Hot Shoe”. Ce qui règle tout mes problèmes. J’attache une vidéo montrant le fonctionnement sur un telemetrique des années 60! J’e. Rachèterai d’autre à ce prix. Y’a moyen de dépanner toute sorte de connectique de flash avec ce produit tout simple!

Es genial

Works great!

The centre contact doesn't contact the middle pin of the Sony MIS shoe on my Godox flash. Thus the flash cannot be triggered via PC sync cable. Useless.