Lypumso High Gloss Chameleon Blue to Purple Vinyl Wrap, Glossy Metallic Car Wrap with Air-Release Tech, Color Change DIY Film, Car Body Film Sticker Roll for Exterior and Interior (1FT x 5FT)

This vinyl wrap is identical to the images on the pictures for this. I had read some reviews that said adhesion was not great for this but it worked fine and i had no issues. I used this to wrap one of my old guitars and if you plan on using this for the same thing i would recommend the 3"x5" the 1"x5" is a little too small for a guitar and having the extra material to pull around those rounded edges on the guitar will help prevent needing to do it in small pieces.

This was my first experience with vinyl wrap, and I found this product easy enough to work with. It is a tedious process (I literally spent most of a day working on it), especially to wrap the part I chose, but this was enough wrap for the job I had, including the first piece I had to throw away after tearing.I recommend watching some videos on vinyl application techniques - I needed to use a series of inlays on this shape since one sheet was not going to form fit without losing adhesion.I also recommend you buy some knifeless tape, Rapid Tac fluid, and a kit with felt tipped squeegee, knife, and plastic shape tool. it made this inlay process much easier and cleaner. You need a heat gun or torch as well, but a little heat goes a long way with this stuff! We'll see how it holds up...UPDATE:After a week of install I noticed some air bubbles forming and parts of the film lifting. I used a heat gun and reapplied the peeling inlays and then used a clear Vinyl Sealing Pen over all the edges to make the install more permanent. Once dry my vinyl application is holding up flawlessly. Make sure you heat seal the entire piece once you are done wrapping to ensure tight adhesion (and do finish the edges that are not touching paint with something such as the Seal-It Pen).

The vinyl wrap dose not work very well it has no stretch to it at all and it rips very easily like paper it also makes a lot of air bubbles and creases like nothing is not a good product at all

As expected

El color muy bonito y el material muy bueno fácil de usar si tienes una gun heater.

I’ve used many different vinyl wraps and this one definitely had issues sticking or staying on. Frustrating

On the roll, this chrome wrap was everything I'd hoped it would be! It definitely "appeared" as though it would do yhe job, however, it wasn't very forgiving for me. I'm not a professional and this was an attempt at a DIY project. I had a hard time keeping air from out of the paper but I just couldn't get it flat. The adhesive was good. It's easy to apply and release (and apply the same paper again) but I didn't find this easy to work with. Maybe someone with more experience will have better success at the end result. In appearance this wrap is beautiful! But that's as far as I made it with this product.

I like that it's easy to put on

I used this to make my own windshield visor, I also fixed up my side door panels; they defiantly look better then before. I also suggest using a wet install method to help you apply it (a spray bottle with water and a tiny drop of dish soap or baby soap mixed together), make sure all the water is out and if you have a heat gun it will help it stick faster but if your not in a hurry it will adhere quickly after maybe 5 mins.