Comgrow Tri-Colors Silk PLA 3D Printer Filament, Rainbow PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool, Coextrusion 3D Filament with Shiny Silk Red-Blue-Yellow

I’ve been using a filament dryer box for a while now, and it’s made a noticeable difference in my 3D prints. The whole point of drying filament is removing moisture, and this box does that really well. The unit heats up quickly and maintains a steady temperature, so you don’t have to babysit it. It’s roomy enough to fit several spools at once, which is super convenient if you print with different materials regularly. The build feels solid and the controls are intuitive, so setting the right temperature and time isn’t confusing at all. Since I started using it, I’ve had fewer failed prints, better surface quality, and stronger results with materials like PETG that are especially sensitive to moisture. If you print frequently or keep filament for long periods, this dryer box is a simple addition that really improves reliability and print quality. Highly recommended. I do occasionally have an error when it gets to hot and starts beeping. It turns itself off and doesn’t get hot enough to damage the filament, even when the error occurs with PLA in the dryer.

This is my first filament drier. I was actually surprised at how well the filament and printer behaves with dried filament. I was having problems with bed adhesion and it turns out that dried filament works wonders in that department. the print quality was good when I could get my prints to adhere to the bed but dried filament is a game changer in that department. My prints are higher quality as well. If I would have known what a difference it would make then I'd have gotten this sooner. The drier is good quality and it is super easy to use. You just pop the filament in , turn it on and select the material and it goes about its work. You can change the drying duration and the built in hydrometer readings let you know if you should pop the lid for a second or two to let the moist air out. It does have a breather at the top of the chamber so that isn't really necessary but it was worth a try based on what I read about these driers. I really like this drier and it will be a standard part of my printing workflow from now on. Definitely worth the purchase.-

This tricolor 3D filament blew me away! I used it on my Bambu Lab printer to print the dragon shown in the photo, and the results were nothing short of perfection. The color transitions are smooth, vibrant, and give the model an eye-catching, professional finish that looks like it came straight out of a fantasy movie. Print quality was flawless—no stringing, no clogging, and the layers fused beautifully. The filament fed effortlessly through my printer and produced crisp detail and strong structure, even in more intricate parts of the model. I didn’t have to tweak my settings much at all—this stuff just worked. Highly recommend this filament for anyone looking to add a bold, dynamic look to their prints. It took my dragon from cool to absolutely epic.

This is the best dryer box, for my purposes, that I have been able to find. The lid seals well, it has chambers for desiccant pack, it gets hot enough for PA and ABS, the control panel works well and is logical, and you can feed the filament(s) to your printer through the lid. I only have one small complaint about it (1 star deduction). The ports for feeding the filament through the lid are not angled optimally. The filament needs to take a substantial bend in order to go out the port. And that is true if you are feeding the filament up from the bottom of the spool, or over from the top. That adds resistance to the filament feed, especially with stiff and/or brittle filaments. It's amazing to me that no company has yet designed and produced a perfect dryer. The problems with all of them, like the one I mentioned above, are sooooooo easily fixed. It's not rocket surgery.

I bought this because it was on sale and I never have had the guts to try it. I followed the recomendations for the filament and my printer and this stuff looks great. I dried it in my dryer for 2 hours just because it seemed right even though it came in nice vac sealed packages. I didn't have any problems with clogging or brittleness with the filament. It does print with ease, looks great and you can make many fun projects. I use a Creality K1C with the 0.4 mm nozzle that came with the printer. The only problem I had was I thought I could get away with no glue on the printer plate but I had adhesion problems. Adding glue to the plate fixed that and I never had a problem again.

I found this to replace a different red, blue, green tricolor I have used but was no longer in production, and I searched to find this one and am using it now, because it is SO pretty. I keep getting compliments on items I print with it. It's high quality and comes out smoothly.

As described. Smooth roll no breaks, no clogging. Never had to "dry", never a moisture problem kept at room temperature.

Bought for my dads 3D printer and this is some great filament no problems at all

I’m extremely new to 3d printing and took up the deal to get this pla with my printer, cheap enough for my spaghetti mistakes as well as printing toys off for my daughter to paint

Gros projet à peindre. Couleur idéale pour ça et rien à dire sur la constance du diametre et l'imprimabilité en géneral

Estas creality de la serie hyper, estoy muy encantado, dejan un acabado bastante limpio, con este tipo de filamento casi ni se notan que los objetos son impresos. Dejan un acabado fino.

50℃にも加温するから、周囲も熱くなります。 リールの絡みには、余り効果は、無いのかとおもいます。リール絡まりは、リールの製品巻き方に左右されますから、この商品に責任は有りません。3Dプリンターからの引き出しは、良く追従しています。

Bought Ender 3 s1 pro, as first printer. Every print that I did using the Creality sample filament never failed. Changed to this filament and had 4 successive fails in a row. As a beginner I won’t use this again and will use Creality filament. Shame as it was bought from the company I bought the printer from. Follow up , The company got in touch to check all was ok, so great customer service. The reel was agreed as faulty and replaced. Can’t fault that ! Thx