eSUN PLA Lite Filament 1.75mm, 3D Printer Filament Upgraded PLA Filament, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers,Black

I have several colors and I've been pleased with quality. I ordered another black and was disappointed to receive a cardboard spool. The spool causes quite a bit f friction and does not spin smoothly on the spindle. I'm afraid that this jerking combined with the offset center of gravity on my Ender 3 S1 will cause layer inconsistencies. This will force me to start my alternative filament feeding system I guess.

I've been struggling with consistent quality, so I decided to buy a filament brand with a dedicated profile in Bambu studio. I am very happy with the decision. I was able to print a massive Rhino helmet in 8 sections. The print quality was great. No issues with stringing or warping. I highly recommend eSUN PLA+.

I ran this on my oldest printer that has seen better days but I'ma still around for a reason. Like always, Esun PLA+ is flawless. I'm always happy with them when I need better materials.

Good quality PLA spool - used for my ender 3 v2 and worked beautifully with 175 nozzle temp and 65 bed temp, slightly cheaper if bought locally but price was fair for prime delivery

I have tried several of the PLA+ products on the market and the strength of eSUN PLA+ far exceeds the competition. I use this product exclusively for prints that needs durability.

The print finish was very smooth and a bit shiny. It printed very well at 195/60. No stringing and no issues with adherence. Like it a lot.

I've been using eSUN PLA+ for about a year now with a number of spools under my belt, all of varying colors. The best part is overall consistency - every spool prints nearly identically with perhaps a bit of variation when it comes to stringing. I don't store PLA/PLA+ in a low humidity setting when not printing and observed minimal moisture absorption - so that's definitely a plus!The one issue I have observed is some mechanical stress from being spooled up causing it to snap before being fed to the extruder. It's a bit annoying if you dont catch it before you start your print, but good news is that it happens either at the filament detection sensor or where its being fed into the extruder so just make sure to check before starting your print.Printer: Ender 3 S1Temps: 205 first layer, 200 subsequent layers, 60 bed tempSpeeds: 150 mm/s.

I am really impressed by this filament works right out of the box no issues. The price is reasonable. The color is more of deep red then what the picture displays but that is expected.

Très satisfait de ce filament ! J’en ai déjà recommandé une bobine après avoir fini la première, et je sais que je resterai sur cette marque pour cette couleur, n’ayant jamais eu aucun souci d’impression avec ce filament. Très bonne adhérence, s’imprime nickel entre 210/220°c, produit des pièces solides.

Da più di un anno ormai ho acquistato una stampante 3d per stampare piccoli gadget e oggettistica varia.Sono sempre alla ricerca di Filamenti di PLA colorati per provare a stampare più cose.con la eSun mi sono sempre trovato bene, anche se un po' più care con il resto della concorrenza del mercato. Mi sono accordo, che giorni dopo erano in sconto, e ho acquistato altre 2 bobine di colori diversi.

Es un filamento fácil de imprimir y que da acabados dignos incluso a alta velocidad si se sube la temperatura cerca del límite superior.Como detalles a mejorar, resulta un poco transparente en lo que a ver el relleno se refiere y hay que tener cuidado con no flexionarlo en exceso antes de imprimir. En mi caso se quebró por el movimiento inicial del cabezal de la impresora al no flexionar lo suficiente entre el cabezal extrusor y el sensor de filamento. También hay que tener en cuenta que no es tan inodoro como otros, por lo que hay que tenerlo en cuenta si se va a emplear en lugares con poca ventilación

Fait le job sans problème.

I don't know if this filament is better than others. or whether it is just suited to my printers. However, it is the only filament that I can use roll after roll, without encountering any problems. I use it in my Ender 3 and Ender 5, as well as my Bamboo Labs printer. I have only ever used the black without any problems at all. If I try their other colours, then I do encounter some problems, such as bed adhesion or rougher surfaces, but I put that down to the settings on my machine. As soon as I go back to the black, prints return to practically perfect.