InsOpaint Advance Energy Saving Anti-Condensation Paint Keep Room Warm | 5L in 24 Colours | Tough Acrylic Wall & Ceiling Paint | Also Good for Kitchen & Bathroom | Anti Mould & Damp (Duck Egg)

I am very disappointed with this product I’m only grateful I didn’t pay the full price. I painted three coats of this product on my conservatory wall around six weeks ago, I carefully allowed it to fully dry between coats all was ok until we had a cold spell a couple of weeks ago. Not only didn’t it stop the condensation but now when I wipe it off the paint comes off with it or anything or anyone who happens to touch the wall while it’s damp. As can be seen from the photo the condensation has run down the wall onto the skirting board taking the paint with it.

Can’t recommend this paint highly enough. I discovered it after hours of reading reviews for mould/anti condensation paint online. Our bedroom wall suffers terribly and we had put up some special thermal wallpaper but after a few months the mould was appearing on it and I was anxious to remedy it. I cleaned the mould off and over a couple of days applied this paint. It advices three coats and there is plenty in the Tim so I shall add another coat when I get time but happy to report it has worked amazingly. It’s been a couple of months since I painted it and despite the terrible weather no condensation or mould. The texture of the paint is slightly rough to the touch and I think this is what helps prevent the condensation occurring.

Great paint. My husband painted our bedroom which had recurring black mould, we treated the mould with a mould and mildew spray and once it was dry painted the walls. It did take three coats and we let it dry completely in between coats and so far no more mould. Fingers crossed.this continues but so far very pleased as by now we normally have the mould reappearing.The only thing I would comment on is I ordered ivory expecting it to be off white and it is more like a light Sandy colour. I would like to be able to buy a small tester pot for the colours as I would like to do my kitchen with this but don’t want the expense of getting it wrong.

used this in my living room can not really say its as good as you think it is 25% saving on heat can not really say it made that much difference in combination with all the insulation (floor /ceiling /) may make a difference. but it is an expensive way to insulate a room hard work as you need to put two to three coats onover a day to allow 3/4 dry time for each coat

I was dubious about the cost but have covered 3 outfacing walls with 3 coats each and all are noticeably less cold to the touch. The rooms are definitely warmer. This in itself is worth it. Any other benefits remain to be seen over time. I will buy again for remaining rooms.

Good product previously used in bathroom, very textured surface seems to hold warmth and reduces the amount of condensation. Overcoated with bathroom paint and still looks good a couple years later.Ran out on the next paint job so bought a new tub for living room external walls where we’ve had mould forming in cold spots where air circulation is poor. On application the quality seems to have gone down, wonder whether the contents have settled out in storage. Initial application can be seen in the photos attached, we’ve had to spend ages stirring the tub to lift a thick settlement from the bottom of it, and still having dark patches appear on the walls when drying. At the moment no significant issue for us as we’ll be overcoating with a mid tone colour, however if it shows through or is a very patchy texture I’ll be updating this review!4 stars if no impact on overcoating, but I definitely would not recommend using this product for a final coat finish.

Had a problem with condensation and damp patches on the wall. Followed the instructions and got rid of any mould before painting and applied 3 coats of this paint followed by a coat of normal paint as I didn’t want white walls. It’s now a week later and I’ve had paint flaking and peeling off the walls where I’d just painted and discolouration on other parts of the wall. Considering it says on the tin that will ‘solve continuous and severe condensation problems including mould, blistering paint and peeling wallpaper’, it hasn’t made a very good impression so far. Have sanded the flaking paint and so far have applied another 2 coats of this paint on the affected areas but not holding out much hope that it will work any better.

It is now about four weeks since I painted our loft with Thermilate Insopaint to prevent condensation on the walls and ceiling. No sign of the return of moisture condensing in the loft to date so I think my problem may be resolved. I would like a bit longer without signs to be fully convinced as I have had short term success with other paints, however, I would say there seems to be an increase in the surface temperature of the painted surfaces as claimed.