Digitizer compatible with iPad Air (Black) 9.7 Inch Touchscreen Front Display Assembly

Product is fantastic very good quality has all the tools you need so make it easier and the adhesive tape very well packed. The product itself is fantastic.The tricky part is to take the old screen it broke into pieces and then pieces of glass where everywhere, but I did it carefully and without going too hard and managed to take it all. After that then is pretty easy to take the screws and disconnect/ reconnect everything.My advice is take a good hair dryer to open and to remove all the little glass left overs, careful with the finger prints everywhere, don’t rush, clean everything at the end before closing, meaning make sure the surround of the iPad where the glass will go is clean as well from any glass residues.Is not particularly hard job it just takes time and care to prevent breaking something else.Btw there is a piece of tape that connects to the button. Keep that and can be reused so you don’t have to get that special tape that costs about £9 again for a tiny piece.Just saved a few quid spend a couple hours but in general all good. Great product overall, having the right tools makes you easier.

Item arrived in perfect condition. I managed to replace the digitizer on my iPad Air without any problems! Instructions were spot on, a small grammar mistake here and there but still made sense. Tools supplied were good and fit for purpose. Digitzer works and has restored by ipad air - and all for a great price! Very happy!

The screen was a lot easier to fix than I expected having followed a video tutorial online rather than using the manufacturers instructions. The screen came with ALL the bits required and the added bonus of a new home button made things a lot easier when replacing the screen.All in all a great product that's helped restore my ipad to "functioning" once again.

The screen was provided with a nice set of tools. With the help of the set of instructions and a youtube video was able to remove the old screen in one piece. I found it a bit tricky removing the home button from the old screen, but I needn’t have bothered because the new screen had a home button already fitted. You do need a decent heat source to soften the adhesive holding the screen in place, a hair dryer a heat gun would be better.It’s not as difficult as people imagine if you follow the instructions and take your time. If the ipad was destined for the bin what have you got to loose.

As a customer who recently purchased the High-Quality Professional All-in-One Kit Real Glass Digitizer Touch Screen Front Display Glass Replacement Assembly from Amazon, I am extremely disappointed with my purchase. Despite the product being advertised as high-quality and durable, it stopped working after just 4 weeks of use.This is completely unacceptable, and I feel that I have been let down by the product and the seller. I was expecting a reliable and long-lasting replacement part, and instead, I have been left with a faulty product that needs to be replaced or repaired at my own expense.I strongly advise potential customers to be cautious when considering purchasing this product. While it may seem like a good deal at first glance, it is clear that it is not up to the standards that it claims to be. I would strongly suggest looking for alternative replacement parts that are more reliable and will not let you down after just a few weeks of use.

So having been doing the odd repair to Apple products in recent months, I’ve gotten used to the ways these devices are assembled, and I decided to add this digitiser to the list of repairs I have done.So overall the digitiser is pretty reasonable in quality, the adhesive on the right hand side of the home button that a couple have mentioned is weak, but knowing how to remove and refit these screens, just like removal, heating up the adhesive on fitting and clamping the digitiser in place, and allowing it to cool worked perfectly.What I don’t like about the digitiser, is the home button. This part personally is the big letdown, the quality of this part is poor. After initial switch on, everything worked, except the home button, and no amount of pressing got it to work. I attempted to recalibrate it multiple times, and still got no joy. Eventually I had to reuse the original screen, which thankfully wasn’t broken.I will have to buy another digitiser for another iPad Air that I own in the future, and I will be looking elsewhere for one.For the price, I’d have expected better quality, this is not a £20 item, it’s more a £12 item.

Tools are perfect for the jobWorked first time, and if like me your iPad is on its 3rd or 4th repair, the adhesive on this screen is awesome stuck down assuringly well on first press and didn’t slowly prize back up like other products on the marketRecommend

The screen fitted nicely, and fortunately it already had the home button and ribbon cable.The old screen was cracked, and I used a heat gun, moving around the edges of the ipad at a distance of about one inch from the glass.Cover the cracked screen with a sheet of sticky plastic to stop shards of glass flying off at you.Start at the top of the screen. Once you get the bladed tool started, work your way around the screen. Keep paying heat to stop it cooling down.Some instructions are included. However the old cable can be pulled out of the ZIF connector, but when you reinsert the new one, pull up the top bit of plastic towards where the cable enters. Don't use force because it pops up easily if you lift it in the right direction.It's tricky fitting the digitizer while still holding the glass up, but doable. Don't peel covers off the glue until your ready to lay it in position. It's the very last thing you do. Also check by powering on that everything works before gluing in place.Also just prior to installing check digitizer is clean and the inside of the glass is clean.New screen does show more fingerprints than original, but in every other respect it's fine.

Top! Gute Qualität, funktioniert tadellos.Tausch des Displays war einfach

Snel geleverd alleen na installatie kwam ik er achter dat de home button niet werkt.verder prima scherm

Ordentlig förpackning, innehållet stämmer med beskrivningen. Skärmen fungerar klockrent, supernöjd. Stark rekommenderar

Bought it for replacement of front screen glass which comes with digitiser and home button, which is highly essential for replacement. it works like a charm and there is no delay or low sensitivity. it works like original. Worth for replacement.

Il faut choisir un moment où on est détendu, ne pas regarder sa montre et y aller pas à pas.La notice est en anglais, cela aurait été bien de l'avoir en français.Pour ma part, je l'ai fait sans vidéo et sans m'appuyer sur la notice d'utilisation, juste en observant.Au final, cela fonctionne, le rendu est impeccable.Voir le résultat sur une longue période, le tactile fonctionne vraiment. Après avoir fini le remplacement, je l'ai laissé reposé 10-15 minutes sous deux gros livres.Je suis très contente du résultat. Il n'est pas 100 pourcent égal à l'orignal, mais le rendu est très bon. Bémol : il faut avoir de bons yeux, ne pas perdre les visses minuscules, de la patience, et un minimum de dextérité. Tout est une question de doigté et de patience.Il faut compter une heure, une heure et demi, pour un novice. Je n'ai utilisé que le petit tournevis et l'outil plat qui sert à décoller. J'ai chauffé le contour avec un sèche cheveux, pas trop, de 30 secondes à 30 secondes. Maximum 1 minute.Pour enlever la colle de tout le contour, avant la pose définitive, j'ai utilisé des "alcohol preps", contenant 70 pourcent Isopropyl Alcohol, avantage, les préps sont déjà imbibées d'alcool et pas trop, cela facilite le travail et ce n'est pas cher à l'achat.