4 Pack 13W/m.K Thermal Pads, 100 x 100mm 0.5mm+1mm+1.5mm+2mm Silicone Cooling Pad Non Conductive Heat Resistance Extreme Odyssey Cover with Dual Self-Adhesive Films for PC Laptop PS4

I'm very impressed with these pads. I snagged them because of the good reviews, and I needed an assortment of pad thicknesses. My RTX 4090 had some high memory temps and a wicked hotspot to GPU temperature delta of 15C. I slapped a Kryosheet on the GPU die, a 6-degree delta now and the memory is running 20C cooler using these pads. The stock pads didn't look bad nor did the placement of them. So, these must be pretty good in comparison to stock pads. Highly recommend these for servicing your GPU.

As good as the best gelid but much softer and easier to work with. The price to performance cannot be beat with these. Good enough for a 4090s, VRMs & VRAM chips with zero throttling and vram temps sub 80C(@450W). These pads + ptm7950 and your gpu is good to go.

I used these on a used AMD RX 6600 XT that was having heat issues. Replaced the thermal paste and used these pads on the VRAM chips. All GPU temperatures dropped several degrees and card seems to be working fine. These pads are at least as good quality as what was on the card (which I presume was there from the factory) and since you cut them to fit you can't go wrong there. Just make sure you check online to see what thickness of pads your card needs. Mine needed two different sizes for chips on opposite sides of the card. How easy they'll be to install depends on your GPU. Most aren't so bad if you aren't afraid of just taking them apart, but some can be tricky with hidden screws, etc.

Bought these for a couple of NVMe SSD heat sink applications, and a RX 6750 XT re-pasting/re-thermal pad application. They work very well, and have fantastic temps. You get four thicknesses, medium softness, and enough for multiple jobs. Hard to says how well these match up against Gelid thermal pads or Arctic thermal pads. AT WORST, there might be one degree difference between them, but for the amount you get and how well they perform, these are perfect for me. In all honesty, given how the supply system works, there is a extremely high probability that these are from the exact same factory as the more expensive brands, but just minus the higher end retail packaging.

This is just what I needed to modify, upgrade, and refresh some of the thermals on some of my old electronics.It seems to conduct heat really well, though I have no way of measuring it. The variety sizes was REALLY useful. Overall good price for what you're getting.My only complaints are the plastic plastic lining. One side of the longing, it doesn't stick at all, and slides around while you're trying to cut it and/or apply the pad. While the other side's plastic lining sticks too well, and as a pain in the butt to get off. Sometimes I had to resort to tweezers, but then you have to be careful that you're not ripping or creating dents in the thermal pad itself.

it does the job. I like the different sizes it has.

seems to keep gpu temps in check after converting a AIO card back to air cooler. Plenty of material to cover all the vrms, chokes and memory.

Normally I wouldn't attempt to take apart my video card, but after the recent heat spikes and the cost of a new video card I decided to at least TRY and repair mine. These pads, along with some GOOD thermal grease, made my repair much easier and worked great. Initially I bought cheaper pads with less thermal conductivity and it didn't help my issue. I would buy these again if needed. Nice pads, work well