Timetec Hynix IC 16GB Kit (2x8GB) DDR3L PC3-10600 1333MHz Non ECC Unbuffered 1.35V/1.5V Dual Rank 240 Pin UDIMM Desktop PC Computer Memory Ram Module Upgrade

I have an old PC (Studio XPS) and when I saw this memory being sold so cheaply I couldn't resist trying to upgrade its existing 8GB memory. The motherboard manual suggested that 16GB in 4x4GB modules was the maximum upgrade possible but after some research which suggested that 8GB modules would work I decided to buy these 2x8GB modules. I left the previous 2x2gb modules in place. The computer booted up without problem and has been running perfectly for several weeks, somewhat faster and no crashes. . This is an excellent cost effective upgrade as I now have 20GB memory instead of 8GB. These are very good, stable cost effective memory modules and I highly recommend them.

All fine.

Look, I'll get straight to the point, you want extra ram? I installed this within 15 seconds powered up pc and currently playing games. No hassle, easy to install, price is just right as long as you don't need fancy casing over the sticks this will be right up your street.

Doubled the memory on my ageing P. CNice and easy to fitHad no problems at all with these modules

Unfortunately one of the RAM modules of the 2 x 8GB kit that I initially bought was not working.I spent plenty of time checking the module in the other RAM slot and also in those of an alternative computer.Disappointed as one 8GB module was working fine, as was another single 8GB unit I had previously purchased.Update: Hassle free return via. Amazon.Second update: Many months later after a further reduction in the price of the 2 x 8GB units, I bought more Timetec RAM and both units are working fine in my desktop computer, now running with the maximum RAM for my motherboard, a total of 16GB RAM.My star rating has been increased to reflect all of my experience with the 5 RAM modules I tried, one of which I could not get to work, but also of my trouble free returns experience with Amazon.

Arrived following day easy to fit and great value.. Highly recommend

This very easy to install , at first wasn't sure if I had sent for the correct card . After I removed the hard drive I could see where they slotted in , all quite easy in the end only took 5 minutes and they only fit one way . I have noticed quite a difference when using the computer , no lag when surfing the internet and apps react quickly , given new zeal to my computer.

The Timetec Hynix IC DDR3 PC3-10600 Non ECC Unbuffered 1.35V/1.5V Dual Rank 240 Pin UDIMM fits in our old Dell Vostro W7P desktop with G41 chipset, and allows the machine to happily run 8GB of RAM despite Dell originally saying it could only handle 4GB.There was a noticeable speed increase going from 3GB to 8GB, mainly because of the great reduction in hard-disk use for overflow-memory swapping. A RAM test took ages, but showed no faults. I had also made sure the BIOS was the most recent.The key point is that this 4GB RAM is DUAL RANK, with 16 chips on the DIMM card. The more usual 8 chip 4GB DIMMs will not work in the G41 motherboards. This makes it slightly more expensive than 8 chip DIMMs, but it is much cheaper than buying a new computer with all the hassle of W10.As with all ESD sensitive components, take care not to touch the contacts on the card and make sure oneself is earthed to the metalwork of the unplugged equipment. It is also well worth giving the insides of the old computer a careful, gentle vacuum!