PC-Products 070147 PC-Clear High Strength Liquid Epoxy, 1 Ounce Syringe, Clear/Transparent

This stuff is great! I bought it purposely to repair the lid of an old ceramic sugar bowl, of purely sentimental value. I already had superglue, which would probably have worked but does not give a very strong bond. I have used epoxy adhesives in the past for ceramic repair and often been disappointed by the poor fit of fragments and the yellowish lines of the adhesive that remains clearly visible between them. The simple dual-syringe mechanism works perfectly, as does the re-sealable cap. Working time is sufficient to mix the product, apply with due care to two surfaces and to press the pieces into position until they are fairly firmly fixed. It's worth noting that you also have a short time to wipe away any excess adhesive - definitely do this before it sets! I left the repair to cure fully overnight and the result is perfect - the join is almost entirely invisible.

Excellent product with good dispensing mechanism allowing for perfect mixing. Nozzle cover requires awareness of its design shape (a tiny protruding piece on the bottom which has to engage in the right groove within its holding frame to replace it the right way round (important twhen you want to conserve the remaining adhesive properly while having limited time to apply the mixed glue before it begins to thicken) but in every other way simple and easy to use. Recommended.

The handle on my favourite tea mug had broken into two pieces. The repair was easy and quick to do and the end result was excellent so I can recommend this product.

Mended a job broken handle very well. Also a piece of ceramic tile. The fact that it dries clear is very useful.

Great stuff easy use and works 💪

Fantastic glue for all those broken objects around the house. Used it on ceramics, glass, metal, wood and anything else that needs it. Easy to dispense the right amount, mix it up and you're ready to go. Make sure you give it some time to cure - it's not superglue but a super glue :-)

I tried twice to join a glass stem to the actual glass but without any success as like other people’s experiences it would not harden despite holding the two parts of the glass together for over 15 minutes. I can’t understand how the majority of other reviewers did not experience this.

My sister has done the mending of her glass table legs with this, only time will tell if it worked well enough, for now it has.

Excelente epóxico, de verdad que sí pega el cristal, ya lo utilice en el cristal de mi comedor y de verdad que sí resiste..

Sent without packet - only the syringes were delivered wrapped in a plain plastic wrapper. No instructions for use were received.

اشتريت باقي التجربة ان شاء الله ممتاز

The product works well. No surprises. . The stopper or lid/cap that holds the liquid mixtures in is well designed and comes on and off easily. You don’t have to cut the tips and deal with annoying snap-on caps/lids. The lid/cap simply twists on and off. I’ve used the product four times already removing and putting back the lid/cap. No mess and the cap/lid works and comes on and off without issues. . The plunger is smooth and trouble free. . The two liquids come out clear and transparent, but turn slightly opaque when mixed. The epoxy mixes into a liquid consistency similar to chocolate syrup rather than tomato catsup, so viscosity is not that thick, so it will run. I recommend using a tray to mix. I used a piece of cardboard and experienced some running. . When applying, note that the epoxy is lesser in terms of viscosity. It will run off your scraper and spill, so take care. But spillage is easy to clean with a wet paper towel. . Don’t over-apply. Just make sure you can get even costing on both aurfaces/sides of the materials to be bonded. . No nasty odors. . A couple of minutes after application, the epoxy feels sticky and rubbery, but that goes away and the material will turn rock hard after an hour or so. Epoxy dries clear. Hardly noticeable even after applied on a wooden door that is painted white. . Very good bonding. I used masking tape to clamp/hold the glued pieces together. And the tape came off easily after curing/hardening. . I would most definitely buy this product again.

Muy buena aunque es muy poco precisa. Huele muy mal pero supongo que es por la resina.