Spray.Bike BLB London Collection, Colour: Blackfriars

I recently sprayed an old MTB frame with bog standard spray paint and lacquer. Finish was rubbish (to me anyway) so had a shop around for other paints. Gave the bike a quick clean and sand, removed all the components and then sprayed with the black Matt paint. Came up fantastic. Paint goes on really easy, hardly any drippage, runs etc and is really thick when dry. I was going to leave it with the matt finish but took a gamble and got some of the sparkly lacquer they also sell. Frame looks outstanding and near professional finish. Normally nothing impresses me anymore because I'm a middle aged man, but this stuff sure did. My other bikes have begged me to do them too. I'm think a sparkly red for the next one!

I've ordered this item I didn't expected to come so quickly. It's came in good condition and it is quite big can and of course it's 400 ML. It's says on the can self- priming, It didn't say in the description it ready have primer init and I didn't need to buy primer at all I could of saved money for that.

This was my very first spray painting job in 36 years of living, and it couldn't have been easier. Does the job in 5 minutes or less. No preparation needed, just spray over the previous colour(that's what I did anyways). The matt black finish looks great on my bike.

My bike frame was quite battered, and I thought it would be an interesting project to try and re-spray it myself, as getting it re-sprayed professionally would be quite expensive. After some research I bought this paint, as well as the matching undercoat (Spray.Bike 48410 Putty 1 Bicycle-Specific Spray Paint - Smoothing Putty) and protective lacquer (Spray.Bike 48400 Varnish 1 Bicycle-Specific Spray Paint - Transparent Finish).I spent some time looking at youtube videos on how to get a good finished, and one thing that is definitely worth it is to do a thorough job in cleaning and preparing the frame before you start applying the paint.You need to be careful when applying the base coat, as it is easy to lay it on too thick. As the paint itself is self priming, it may be worth applying the base coat only in the areas where there are deep gouges or chips, using a thick filler coat, and then sand to get an even surface. For best results you should clean thoroughly after sanding. The undercoat can runs out quick, I just about managed to finish my frame before I run out of the 400mL can.Once the base coat is sanded and all thoroughly clean and dry, applying the colour coat is really easy. The spray pattern is good, and you get good coverage without excessive running, the idea is you apply successive light coats so that you get good coverage without runs. If you do get runs, then it is sanding to even the level, clean and re-spray if needed. The paint goes a long way, and I had probably a quarter of the 400 mL can left by the time I finished.Finally, use the protective lacquer to make sure the paint will not scratch off. As with the base coat, you need to be careful to apply lightly, as it is easy to get runs, which then you need to sand down and start again.Overall very happy with the result, which ended up looking better than I expected (now I need new wheels because the frame looks new!), only thing is, if you want a good finish, take your time.

Used this to re-colour my daughters bike. It goes on well and gives a good finish. I would say that like most painting jobs the prep is the key to great results but this paint also assisted.Dries fairly quick and I was pleased with the outcome. Durability ? Time will tell but for now it looks good

Ok so matt black spray in a can. Keep your expectations low and you will be fine. Prepare surface carefully. Sand and prime first. Wait at least 20 mins between coats. Apply light misty coats. 3 or 4 minimum. The finish is not baby smooth it is textured but nice looking. May need a gentle sand between coats but i liked the finish so didnt sand. Essential to apply transparent varnish afterwards (2 or 3 coats).

I'm not usually one to write reviews but I'm so impressed I had to. My son had a purkle and white old BMX bike but he asked for a new one solely because of the colour. I thought I'd try a spray paint and I saw this recommended and thought I'd give it a shot not expecting much. However it's amazing. It's given a whole new lease of life to his bike. No prep needed except a quick wipe down. Definately recommend

It is decent but, don't expect a factory finish. Importantly, it comes in two capacities not correctly mentioned in the title - so, please carefully read the description - it's more cost effective to buy the 400 ml.

Shocked at how even and all around great the final product is. I painted a road bike with the black and it came out a very fine matte black that looks straight out of the factory. Highly recommend.

Alles klar

Peinture de très bonne qualité. Le rendu « mat noir » est très beau. Très bonne tenue, cela fait 3 mois que j’ai repeint mon vélo et la peinture tient bien

Costa di più delle altre è vero, ma la bicicletta di mio figlio è venuta benissimo!Per lui vernice molto valida! Consigliatissima. La consegna non è stata puntualissima... comunque risolto con il servizio clienti.

Buono