Silk Triple Color PLA, Coextrusion PLA Filament for 3D Printer, Silky Glossy Finish Filament, +/-0.03mm, 1KG Spool, Silk Orange Blue Green

This is an excellent filament that provides brilliant print quality and shiny finish.I was initially impressed with how easy it was changing to this filament.I changed from a different brand of pla to this silk pla quickly and with no difficulties.The first print I did was the low poly vase model.Each side of the vase is very linear with good layer adhesion and only 1 artefact, that was due to the bed level being slightly off.For a first print this was very impressive, and the 'silk' nature of the filament really shines when under the light.The second print I did was the Koch Snowflake vase. This time with the bed levelled properly, the part came out flawless. The surface finish is very even and the model is strong, and would not snap when dropped on a hard surface.Finally the third test print I did was part of an RC plane fuselage that I designed.This had fairly thick walls, and unlike the other 2 models, was one continuous parallel line. This really showed how little artefacts appeared on the print.I also found that this made the silk really pop, as unlike with the snowflake vase, there was only 1 direction for the light to reflect off and so really gave the appearance of a metal-like material.Overall this is a brilliant filament, that benefits from the silk to give a metal-like look, with a good representation of the copper colour that it is based off.

Prints like a dream and super silky and shiny. Will be getting other colours from this range :-)

The quality of this filament is great and the colours are so pretty, prints just look amazing due to it. I have had no issues with tangling, clogging or filament breaks when using on both Creality and Anycubic printers

I'm reviewing the gold and silver PLA silk.Gold:Printed well. Smooth edges, great adhesion and a nice shiny texture. It’s quite orange though. It shines in sunlight, but looks plastic and more caramel colour than gold. I was hoping for a more metalic yellow gold. I’ve compared my print to a pound coin in the picture so you can see how orange it isFor further comparison I also photographed a similar part that is spray painted with metallic gold paint. The spray painted part (closeted to camera) is dull, but does reflect the light, looks metallic and is a more pleasing realistic gold.When the Eryone Gold printed part (furthest from camera) catches the light it does shine well, but overall looks plastic.I’m using an ender 3 v2. I find the eryone silk PLA prints nice at 215°I've given it 3 stars on account of the quality of the filament - it's well wound on the spool, and is nice to work with, but the product images for gold are misleading in my view. The silver is probably about right.I print for customers, and I think they would be disappointed with the gold if i sent them this, so I'm returning the product. The silver is acceptable, but I will try another brand next purchase as I want a bright silver next time,

ERYONE Silk PLA Filament1.75mm PLA Silk SilverI bought this Silk Silver filament because I wanted to produce some wheels for a 1/10 scale radio controlled car and I wanted them to look like aluminium alloy wheels. I had read several of the reviews by others, many of whom praised the filament and said how much it looked like metal when printed. I have used another make of Gold Silk filament and I was expecting similar results.The faces of the wheels were printed flat on the glass bed of the 3D printer so the surface finish is glass smooth. However I am not so sure I would agree with these reviews as the results I get are somewhat less than ‘Metal looking’ and more like metallic, like metallic car paint. If you think of the sort of finish you see in metallic silver cars or painted metallic wheels, that is the type of finish with this filament. The exception to this is on the layer lines. For instance, on the wheels I printed, the face of them looks like the paint finish I mentioned, whereas the round part or rims looks very like a turned metal part, I have attached photos to illustrate this,Don’t get me wrong, I am still quite pleased with the results, it’s just not quite what I expected. The wheels have come out looking like silver painted wheels rather than machined aluminium wheels.I may have been expecting too much from, what is after all, plastic. So, I will have to pay attention to the orientation of items printed with this filament and arrange them so that the layer lines form the sides that I want to look like machined metal.I did a little experimenting to find the best temperatures for this filament but ended up with my usual setting, that is 210C for the nozzle and 60C for the build plate, I printed the wheels at 50mm/sec. the printer is a Bowden feed with a plain borosilicate glass bed, 0.4mm nozzle. I printed the first layer at 0.2mm 100% feed to get a good squashed layer and avoid any gaps between the lines and a concentric infill bottom layers to get a symmetrical finish pattern. I got good adhesion first attempt with no additives, just a freshly cleaned (with surgical spirits) glass bed.Would I recommend this filament? Yes, it prints well, the finish is nice and prints are strong but don’t expect a shiny machined metal look.

Printed really nicely once dialled in, great colour and really well rolled so that the colour mostly stays on one side. Looks great on the details of the Ghostship bench, and super smooth and shiny on the Bulbasaur model. Minimal stringing.

The eryone store has a fantastic selection of materials, this was exactly the colour set I was looking for. Value for money is perfect, brightness is perfect, experienced no clogging. Rolled perfect on the reel so no risk of tangles that I can see. Durability yet to be seen. But over all very impressed so far. Thank you for a great product to expand my printing experience.

Bambu lab PS1 0.4 nozzle0.16mm high quality @BBL X1Cgeneric PLA SILK filament settings -only changed recommended nozzle temp MIN 190C MAX 220C

This brand doesn’t disappoint, like the option of trying several color and had fun printing PIP creatures.The color change was nice with these figures being long.Stuck to mat fine, been printing this type of filament at higher end of temp range, about 210 212 And bed at 60. Prints look good & seem strong only had problem with one print where leg joints were too thin, that was print file not filaments fault since the rest of the legs were fine, just the joint. I just crocheted replacement legs and sewed them on through hole to save print, soft legs might have worked out better since the legs are not sharp, and the rest of the print had larger flexible parts so a smaller child can play with it.Every spool so far from this company has been good and I can depend on not having to tweak it, if first layer goes well don’t need to babysit it.

tres bonne qualitéla couleur est belletarif interessant

Bon filament

Il filamento ERYONE PLA bicolore doppio da 1,75 mm, nella versione seta nero-viola, rappresenta una scelta interessante per chi cerca un materiale di stampa 3D con una qualità eccellente e un effetto visivo accattivante. Questo filamento è particolarmente apprezzato per la sua versatilità e per la combinazione di estetica e performance, ideale per realizzare modelli 3D con un aspetto lussuoso e dettagliato.Caratteristiche principali: • Filamento bicolore doppio: Questo filamento offre una transizione fluida tra il nero e il viola, creando un effetto cangiante che cambia a seconda dell’angolazione della luce. È ideale per ottenere modelli con finiture artistiche e dettagli estetici notevoli. • Compatibilità: Il filamento PLA di ERYONE è compatibile con la maggior parte delle stampanti 3D FDM/FFF che supportano filamenti da 1,75 mm, rendendolo versatile e facile da usare. • Precisione di stampa: Con uno spessore di 1,75 mm e una tolleranza di ±0,03 mm, questo filamento garantisce un’ottima qualità di stampa, riducendo il rischio di intasamenti o errori dovuti a variazioni nel diametro. • Materiale PLA di alta qualità: Il PLA (Acido Polilattico) è un materiale ecologico e biodegradabile derivato dal mais, che rende questo filamento una scelta più sostenibile rispetto ad altri materiali plastici. • Effetto seta: Il filamento presenta una finitura lucida e setosa, che dona ai modelli stampati un aspetto più rifinito e elegante. • Bobina da 1 kg: Con una bobina da 1 kg, offre una buona durata e una quantità sufficiente per numerosi progetti di stampa.Pro: • Estetica bicolore: La combinazione di nero e viola crea modelli con un effetto visivo unico, che risulta particolarmente interessante per oggetti decorativi, action figures o accessori personalizzati. • Alta qualità e precisione: Il filamento offre una stampa precisa con ottimi dettagli, ed è facile da gestire anche per chi è alle prime armi con la stampa 3D. • Ecologico e biodegradabile: Essendo realizzato in PLA, è un materiale più sostenibile e meno dannoso per l’ambiente rispetto ad altri filamenti in plastica. • Finitura lucida e setosa: La qualità estetica è superiore rispetto ai filamenti PLA standard, con una superficie più liscia e riflettente che dona ai progetti un aspetto premium.Contro: • Sensibilità alla temperatura: Come molti filamenti PLA, può essere sensibile alle alte temperature, quindi è necessario evitare esposizioni dirette alla luce solare o a fonti di calore intense, poiché potrebbe deformarsi. • Durabilità: Il PLA, pur essendo resistente, non è altrettanto robusto o durevole come altri materiali come l’ABS o il PETG, quindi non è adatto per applicazioni che richiedono resistenza meccanica o chimica elevata.Conclusioni:Il ERYONE Filamento PLA bicolore doppio da 1,75 mm, con la sua combinazione di nero e viola e l’effetto seta, rappresenta un prodotto ideale per chi desidera creare modelli 3D con una finitura elegante e particolare. La qualità di stampa è ottima, con una precisione elevata e una bobina che offre un buon valore per il prezzo. Se il vostro obiettivo è ottenere stampe esteticamente raffinate e artistiche, questo filamento è sicuramente una scelta valida. Tuttavia, se cercate maggiore resistenza per applicazioni più pratiche o strutturali, potreste voler considerare altri tipi di filamento.