Neilsen CT3651 7pc Wood Drill Set - 4, 5, 6, 7, 8, 10, 12mm | 300mm Long | Ideal for Wood Working Applications

Ideal for drilling pilot holes through 150mm fencing posts and then using hole to guide larger drill bits accurately for hinges etc

n/a

Very poor quality made items made with inferior steel. I also doubt the hardening & tempering if the steel. I was using this to drill out a block of olive wood to make a knife handle and the steel twisted and did not snap and when the drill was reversed to pull out the 8mm drill bit it actually unwound it’s self and snapped at the shank and left the remaining unwound drill but stuck in the wood ruining a £25.00 block of olive wood burl. My faith in these drill bits and in Nielsen has been shaken to the point of me considering no longer purchasing there goods. If Nielsen cared about there customers they would get in touch with me to rectify this issue but I don’t think they would as they would not of sold me a inferior quality tool compared to it competitors and it’s almost a guarantee if a company sold you a poor quality product then they don’t care for there customer. I suppose if they get thousands of reviews then they probably won’t read this and therefore won’t right this wrong as you can’t right a wrong with an other wrong. I’ve left a picture of the shank to show you where it twisted then snapped. It’s my theory that they are only hardening the shaft up to the base of the shank which is where it twisted and the bit un wound it’s self to be straight which ruined my unique piece of olive wood burl and the weak point is the transition from the annealed soft steel to the point of the hardened steel which is exactly where it twisted and snapped so it’s self evident that I’m probably right.

5mm drilling 75mm pine post. Not happy

Good value drill bits. There is very little wander when drilling, which is always a problem with long drills. Nice and sharp. Work well.

Surprisingly good value and nice and long. I was drilling sycamore tree trunks using a small battery powered drill. The smallest gauge drill bits weren’t up to the job and quickly buckled even though I was frequently removing the sawdust. The bigger drill bits were fine and did a good job. I’d buy again but be cautious about how I used the smaller bits; maybe just on ultra dry softwood.

Brilliant but the fine one is a little flimsy but be gentle with it.

Ideal and fit for purpose.

Proprio quello che volevo a un prezzo giusto.

Son perfectas. Ya las conocía.

Letade efter långa bort och den här kom upp som resultat. Jag köpte den här satsen med borr för ca ett år sedan, så kvalitén kan ha blivit bättre. Borren är tillverkade av så dåligt stål att de tappar all härdning de haft (om de någonsin haft någon) innan man ens kommit halvvägs ner på spiralen som transporterar spån. När de gjort det är de så mjuka att de vrider upp spiralen baklänges längs rotationsaxeln, och går av.. Murphys lag säger att borret kommer gå av nere i hålet och du kommer inte kunna få tag på det, och har därför precis förstört det du försökte borra i. Jag letar vidare efter något som åtminstone håller för några hål om året.

Excellent rapport qualité prix, arrivé en parfait état et de très bonne qualité

Die sind keinen Cent wert, nicht nur sie alle krumm sind, nein die sind auch so weich wie aus Baustahl.