PKEYCordless Electric Screwdriver，Electric Screwdriver Kit with 55 Magnetic Precision Bits ，2 Torque Settings，3 LED Light, Ideal For Computer, Bookcase, Bicycle，Watch

I have several cordless screwdrivers and each one has a specific purpose for what I use it for. Up until I received this, I relied on the standard handheld manual driver. Why? Why use the manual method when I can use this lightweight, yet still powerful power driver. The case is also very nice and carries all the various most commonly used types of interchangeable tips! The case is kept closed by magnets so everything stays in perfect place. I read some people were having trouble with keeping the case closed and I think it’s primarily because they weren’t putting the two halves together properly. The magnets have to be aligned correctly in order for the case to stay closed. So basically both sides have magnets and they just have to line up with each other. The body of the driver is a bit slick which I personally like. So if you come across a situation where the screw is a little tough to remove or to replace, you just have to tighten up your grip more. Another issue I read about is that the driver doesn’t lock itself so it can be used in a manual mode if needed. I found no problem whatsoever with this at all. It’s not really designed to be used as a heavy duty cordless screwdriver, but is perfect for more of a what a common screwdriver is used for and is ideal for any type of precision needs.

I wanted to like it, but I just can't.Case:The case is nice, it has magnetic sides, though I wish it was a trifold of some sort, as the sides fall off easily. This could be remedies with better magnets. Currently the design of the case while "cool" is not very functional. No place for the drive to be protected, see driver below for more. The drive resides in a plastic tube with two rubber plugs. If you lose any of these 3 parts, the drive can not longer be secured. There is no room for the charging cable, and no room for the accessories even the base model comes with. The bit holders are fantastic and should be a model for all other companies. The case has no markings for bit sizeBits:So far they seem fantastic, it listed them as magnetic, but I haven't found any that are magnetic on their own. You must use the tool on any bit you want to be magnetic, I found it wore off within 5 minutes and frankly was a bit sad. Bits should be marked clearer, with white enamel paint inside the engraved text. or apply lettering to the case to easily see the size.Driver:Super smooth driver with no grip, high initial torque, enough it can fly out of your hands, or spin small devices out of your opposite hand. There should be some texture or rubberized material to reduce this. Overall there is little power to this driver, screws with heads designed to seat into a enclosures such as hard drive screws, it can barely turn them. Driver also has no protection against pushing both buttons, a simple xor gate would have fixed this. it can be one or the other, not both. This driver has no such luxuries, so hopefully it does not get stuck in your pocket, or something presses against the plastic tube that protects it. Lightly pressing on the tube sides cause it to turn on, if you don't catch it, it will burn up the driver. I thought maybe I could face the buttons to the case to protect them, but lightly pressing still activates it.Final thoughts:It also comes with a small magnetic worktable, sadly it is black and screws are hard to see on it. There is no place on the plastic case for it to even stick too. just another accessory to carry around lose, just like the magnetizing tool, and cable. The case has a giant lettering of CS0233 on it, which is just ugly, and means little to nothing, it also has an even bigger 56+1 with a picture of a bit, again pointless the opposite has a giant logo and a screw and spring on it. The lack of protection on pushing both buttons, the weird out of case holder for the driver that only works if you have 3 pieces to combine is just a bad design. The case could be trifold to protect all bits from falling out, and protect the driver. Case could also use an internal battery you can plug the whole case in with a retractable cable, and dock style charging to the driver. This product is a big expensive for the lack of any decent features. Aliexpress has provided us with much better for a fraction of the cost, and only a small loss in quality.

I already knew what I am buying an inexpensive screwdriver that works. I especially like the 1/4" size and the included 1/8" adapter. The case is also very nice.Possible improvements could be changing the dial on the top for a sliding switch on the side for faster access with one hand. Low setting may still be too high for tightening smaller screws.Concern: the shaft has a noticeable run out, you can even see the wobble on the promo video.Overall is a good value.

Had an issue with the first tool I purchased, they made it right by shipping me a brand new tool that works very well. Nice to see this level of customer service!

This is the absolute best tool when your putting together those metal shed with the hundreds of small screws.

Super happy I bought this. I'm Xtra hard on it and it's great. If I do break it, I'll buy another.

Lightweight. Affordable. Easy to use. Easy to store.

Over all I enjoy the product. It's made working on equipment easier and cut time by atleast 40%.The only downside in my opinion is that it lacks torque. Now I'm not using it on anything that was torqued down but at times I have to break the screw loose with an Allen key or a screw driver before being able use the tool. Other then that it's great.