4.10/3.50-4 Premium Replacement Inner Tube (2 Pack) - Heavy Duty Angle Valve 4.10 x 3.5 - 4 Tube for 10" Pneumatic Tires, Hand Trucks, Dolly, Lawn Mowers, Wheelbarrows, Generators, Utility Carts

Inner tubes aren't sexy but when you have to replace them, their importance is obvious. I bought two hose carts, good ones, and within 6 months I had 5 flat tires. I ordered and received 6 replacement inner tubes very quickly. They are very high quality, both the tube itself and the valve stem. The rubber feels as thick as a typical car tire inner tube. The valve stem is off set, which makes adding air much easier than with the original straight stem. These were more expensive than other tubes but after removing 5 tires, taking the rim apart to gain access to the tube and then reversing the process, doing it right with a high quality tube will likely guarantee that not having to do it again anytime soon. The tubes I took out were paper thin and the wrong size for the tires. Do it right the first time!

Material appears to be better than the original. My wheels are a split rim allowing me to unbolt and separate the tire to insert the tube easily. Also, added a green slime liner for additional protection.

Good

Could not find an inner tube with the proper curved valve stem at local retail. These fit a wheel that isn't offset, has the hub extended equally on both sides, about 4" on the axle, and the hole for the valve stem almost in the center.

The tube replacement worked excellent. I've had my dump yard cart for 10 years now and this is the first time I havehad to replace a tube. It worked very well and I am now back in business. Being a woman I use my cart quite oftenrather than lugging mulch bags etc. The tube was perfect and now I have an extra should I need to repair anothertire.

Tubes are great. It's the tires you have to fight with to get on and off. After deflating the old tubes, generously spread dish soap around the tire edge and rim to get off (with help of flatheads/prybars); same thing to put back on (not so much you render your hands as useless as a slip-n-slide), just be sure to mind the valve stem on re- installation. Expect a struggle to get the tires back down.

To the eye, the inner tube is made from high quality, heavy duty rubber. The angled valve was perfect for my installation into the tire from my kayak dolly/cart. It would be the same for a lawn mower or other dolly tire. Installation took patience using screw drivers and some strength to seat the inner tube (as expected). Your local car garage will do it if need be. Once installed, the work is over, and the tire is like new.

These were for tires for a hose reel and they worked great