LYL LEYOULAND Adjustable Sump Baffle Kit - Refugium Kit for 40 Gallon Breeder Tank - Reef Aquarium - Saltwater Aquarium Filter System- Protein Skimmer Sump

This kit contains everything you need and fit perfectly. I purchased the 20 long aqueon tank and this conversion kit. Everything you need to create the sump is included. High quality material used with appropriate thickness to last indefinitely. As mention in previous reviews, take your time and plan everything out based on your needs. Get it all taped in as the directions show. Mark where everything goes on the outside of the tank and then start from right to left and silicone the first piece in. I used a silicone that sets in 15 minutes and cures within 24 hours. Let the first piece set before moving on to the next piece. This is most important for the overflow and bubble trap on the right side of the sump. Because these two pieces are so close, you need to let this one setup so if you bump it accidentally while putting silicone on the next piece, it will not move and ruin your seal. Great product, I would only change one thing. The support that hold the filter socks are a little clumsy. Nylon nuts and nylon all thread would have made for a more secure option. But this way works, just need to be careful when changing out socks. You could put a small bead of silicone on it to keep it more secure. By the way, get the 4 inch filter sock that is 9 or 9.5 inches long. That works perfectly for this setup.

Little bit of a pain in the butt at first but the silicone I used setup super fast so basically the first baffle I siliconed didn’t turn out as good as my next two so work quick also I would start with the baffle furthest away from the filter sock holder and I used my finger instead of the tools sent with the baffles but it’s definitely worth it unless u want to pay 300-400 bucks for a sump I built this sump for $105 bucks I bought a 20 gallon long from petco it was 50% off so the 20g was 25 bucks bought two tube of silicone but one is enough so it cost $100 if you take off the other tube of silicone

the sock chamber is what kills this. otherwise it is very high quality. i wouldn’t buy this kit again just because i had to make changes to the sock chamber because of how terrible it is designed.

Every parts fit like it was designed. Save a lot of money with this kit. Thank you!

Been using this about a year now everything‘s been pretty sturdy and I’ve used a lot of different equipment and being able to play around with adjustable wall heights was handy, the one thing that I would change is that the panels that hold the sock filter and let the drain through can detach a little too easily I think it would be better if they snapped on or something like that so it’s not constantly falling down while you’re trying to change out the sock filter, they’re low-key a pain in the ass to get back on especially if you’re working in a cramped space which I assume a lot of people’s sump set ups are

Tiene las dimensiones correctas muy versátil además de tener buena calidad muy fácil de armar ,además que lo puedes organizar a tus necesidades.

Great product need to trim it down a bit

Ordered the 20 gallon long kit. It is too wide and bows the glass out so the only way to get it to work is to put the baffles at an angle.

I generally like this kit, it’s thick plexi and appears well made. I did measure before purchasing and this was supposed to fit. Most of it does, however the filter sock holders and intake are about a inch shorter than the rest of the other pieces. It’s weird. But I can’t use them because there is no way for me to support the end that does reach the glass. The other pieces fit well so I’ll keep it just so I can use the remaining baffles.