[Sensing method] Through-beam(Emitter+Receiver) [Sensing distance] 1 m (Red light)(Sensitivity Adjustment Unit can be used.) [Operation mode] Light-ON [Model] NPN output [Appearance] Rectangular type (Side-view) [Standard sensing object] Opaque, 2-mm dia. min. [Minimum detectable object (reference value)] Opaque, 2-mm dia. [Directional angle] Emitter: 2 dig. to 20dig. Receiver: 2dig. to 70dig. [Light source (wavelength)] Red LED (650 nm) [Power supply voltage] 12 to 24 VDC +/- 10%, ripple (p-p) 10% max. [Current consumption] 30 mA max.(Emitter 10 mA max., Receiver 20 mA max.) [Control output] Load power supply voltage: 26.4 VDC max. Load current: 50 mA max. (residual voltage: 2 V max. for load current of 10 to 50 mA, 1 V max. for load current of less than 10 mA) Open-collector output [Protection circuits] Power supply and control output reverse polarity protection, Output short-circuit protection[Response time] Operate or reset: 1 ms max. [Insulation resistance] 20M Ohm min. at 500VDC [Dielectric strength] AC1,000V, 50/60 Hz for 1 min. [Degree of protection] IEC 60529 IP67 [Connection method] Pre-wired (standard length: 2 m) [Weight] Approx. 40 g [Materials] Case: PBT (polybutylene terephthalate) Display window: Denatured polyarylate Lens: Methacrylc resin [Accessories] Instruction manual, Set screws for mounting (Side-view Sensors: M2 x 14, Flat Sensors: M2 x 8), Nuts(1)
ترست بايلوت
منذ أسبوعين
منذ أسبوعين
