Brembo P83066N Front Disc Brake Pad

I have Aprox 1000+ miles on these pads now. I am also a brake enthusiast, so u pay attention to stuff like pad friction coefficient ratings (these are GG). Should you get these pads? Absolutely. These are ceramic pads, and they’re great for daily driving. Because they’re ceramic based pads, they are extremely low dust and extremely quiet. IF you are having squeeking noises, that’s a user installation problem. Your caliper and ALL contact points should be properly cleaned prior to install. All contact points should also be properly lubricated with a quality brake grease. I used Pentax ceramic high temp brake grease (purple color). You SHOULD also be using new pad hardware (pad retaining pins and pad securing pins). These pads don’t come with new hardware. You also SHOULD be pairing these pads with new rotors or at least freshly resurfaced rotors. You SHOULD also be bleeding your brake post-install. These pads also need to be properly bedded in after you install them. If you correctly do all this, your brakes will be quiet/silent with a progressive feel to the pedal. After 1000mi+ mine are absolute quiet with a huge improvement in braking performance. The fit is just like oem. They fit perfectly in my 2017 4Runner front calipers. Paired with new rotors, they stop phenomenally. A noticeable improvement compared to my Toyota oem pads (FG). If you pair these front brembo pads with a a rear pad that’s also GG rated, you’ll have the best and most powerful brake setup possible before going big brake kit. The real reason why these pads are one of the best is because their friction coefficient is GG. This is the highest friction coefficient you can have before getting into race/track pads (which are noisy and dusty). Factory oem pads (lower end ver) are EF and the higher end oem ceramic pads are FG. This means both factory pads are lower friction than these brembos. Other popular brands like the Akebono proACT or Bosch quietcast are also only FG pads (Higher Friction = better stopping power/bite). The higher the letter, the higher the friction coefficient. It ranges from E, F, G and H (lowest to highest). The first letter is the cold biting friction coefficient and the second letter is the high biting coefficient.

مناسبة للاندكروزر فورشينر 2014

Arriving brand new condition. Went on easily. Work as advertised and no dust! Have been using for a few months and so far are working very well. If they keep doing this well, I’ll definitely look here again. Next time I need to change brake pads. Thank you for smooth transaction, would do business again.

These Brembo brake pads fit perfectly which was a sigh of relief for ordering online. In addition I replaced the old rotors with Brembo’s from Rock Automotive. Finally my vehicle stops without the pause before the brakes start to work and I don’t have to stand on the petal at a stop sign to prevent that phantom rolling.

I have purchased brebo brake pads p83066n from amazon on january 11, 2026 ; installed them on 2015 toyota tacoma and checked my rotors and pads on 9/18,2026 since i seen some lines/uneven wear on outside side of rotor. Took all apart and found uneven wear on outside and inside of rotors. Brake pads and rotors have wavy wear, keep in mind that slide pins are fine. Contacted brembo thought amazon steps and no reply of anything after 1.5 week. I have bought nany different manufactures of brake pads as oem and power-stop Never had a problem like this . In past i have question re backing plate on power-stop snd poeerstop respospe was quick and sufficient. Will definitely will not buy or recommend brebo