Creality Glass Bed for CR-10S Pro, CR-X, CR-10 V2-310x320x4mm, Official Version Build Surface

This bed installs just like the factory bed on my CR10s Pro, it also seems to be pretty flat not the same issues I had with my warped aluminum one. However the only way anything sticks is with glue stick, they get two stars and not one only because after it cools most things come off super easy. To be honest I am no happy about having to glue the bed every print and clean the glue off every print. Trying to leave the glue on you might get two prints but its simply better to wipe clean and reglue between prints.ABS doesn't stick at all tried lowering the z offset so much it no longer extruded, glue stick works perfect.PETG sticks bet will basically peel off during layer two as its to weak of a bond. Glue fixes this.PC same story as petg sticks but weak and second layer pulls it off the bed. Glue fixes this.Nylon 910 Sticks and got multiple layers to stick but around 10 or so layers the warping started pulling the whole thing off the bed. Glue solved this issue as well. I heated my chamber to 45C I likely should have went higher and maybe it wouldn't have warped and I could have gotten away with no glue.

I've ordered several of these from this vendor and about half of them have come warped and had to be returned. They feel the same but for some reason prints do not easily pop off after completion and need to be scraped off unlike the stock beds. Some of the glass beds arrive with a smoother surface, some arrive with a more sandpaper like borosilicate surface, i am not sure how to get a consistent product from this store, but ill look for another vendor, i dont know if this is the vendor fault or creality but its very difficult to get a good build plate

This bed has a different coating from the one that came new with my CR-10 V3. The adhesive coating is thinner with a different texture and the "dot spacing" is wider. Prints have not adhered well so far, testing with PLA and PETG. While prints adhere well to the original bed with only a swipe of isopropyl alcohol, neither glass cleaner nor alcohol has improved results so far on this bed. Increasing heat doesn't help much.The first one I bought here was domed upwards in the center about .3mm. The seller was incredibly responsive and had another to me right away. Unfortunately, the replacement glass is wavy with three distinct high areas. It still earns three stars because the glass side is flat enough and it works really well with hairspray.

I was loving this bed. Then about a month of using it I noticed the edges of my prints started lifting off. Then it stopped sticking all together. I came ho.e to a big mess and thought the nozzle blew. Bought a better nozzle and it still wouldn't stick. Adjust the bed springs and still nothing. I installed the stock bed and like magic it started working lime a champ again. Very disappointed. And of course it stopped working when the returned date passed.

I had tried every trick in the book to get my stock Snap Maker 2.0 A350 bed to be uniform and level across the bed, to no avail: heated cal, 11x11 points, heating then loosening/retightening heated platform screws, manual cal, dial guage cal, custom scripts, PTFE washer shims, copper tape shims, etc. It never gave me better than a ~200x200mm^2 surface that still wasn't perfect but at least adhered satisfactorily. Then, I bought this, did a 3x3 manual cal with the provided shim card and voila! Perfect prints from edge-to-edge. I only lose about 40 mm in the y-axis because the A350 is 320x350 and this plate is 320x310. I'll take that loss because it's so much better. I had to print custom remixed brackets because the ones on Thingiverse are for the 310x310 plate, but will post on Thingiverse. A+ product.