HTVRONT Permanent Vinyl - 57 Pack 12" x 12" Permanent Adhensive Vinyl Bundle Compatible with Cricut Cutting Machine, 52 Adhensive Sheets and 5 Transfer Tape Sets for Party Decoration, Stiker

Works great, good adhesion, good quality, removes easily from vinyl, good value for money

Easy to weed and very adhesive. Saves you time because is easy to remove due to great quality.

So I needed some vinyl for jobs, and of course realized as I getting ready to cut the vinyl...not enough stock on hand. No worries, my BFF (Amazon) to save the day. I haven't been happy with the past couple orders of the vinyl I was using (bubbles, the adhesion seemed less etc etc) so decided to snoop around and landed on this brand. Read the views, seemed to be some happy folks out there, and pushed that buy button. I do like this brand, and will order it again. But there are Pros and Cons..now these are my pros and cons, so take it with a grain of salt. Pros: Incredibly easy to weed! I normally add a ton of extra weed lines to my jobs, but with this brand after the first run, I just weeded with the design. No extra weed lines, no issues at all. I went through half a roll of black and white. Not a single bubble or mar in the vinyl to be found. Cons: The backer/carrier is slicker than snot. I couldn't run/cut my jobs directly from the roll as I prefer to do Now this could have been 100% operator error (Moi), but the plastic backing keep sliding all over the place. I eventually put down my lazy stick and cut it length and slapped it on a mat. No issues after that. Good value for the price. I would not use this specific brand for any jobs I needed to run over 22" continuous, but other than that will be a goto for me.

I've ordered this many times. Easy to use. Easy to cut. The look is nice and shiny. I like the variety of colors and bundles with this brand but this one is best for me making black decals. It works well for me. Durability depends on where is being applied and how well it's applied but these can be subject to human error easily.

*Edit again (latest)* Ok, so like last time, everything below is true, including that it's insanely difficult to get the vinyl to come off the plastic backing via transfer tape. HOWEVER, I've been able to continue using this vinyl (which I love in every other way) by doing a super annoying "pre peel" before I send it out to my customers. Meaning I cut the design, apply transfer tape and then manually, tediously peel the design from the backing. It's tough for me, so I can't imagine sending these to the general sticker buying public as-is. This method seems to work pretty reliably, once it's removed from the backing once it's good to go - it's just not something you should HAVE to do every time. I don't think this would be suitable for intricate designs due to this, it's difficult enough for just standard text, fine lines would almost assuredly tear. I bought some other colors as well, but I haven't yet cut on them - I can only assume they'll all have similar issues. Buy at your discretion! **HUGE EDIT** So, everything I said below is true, this stuff is easy to cut, doesn't look terrible, lays flat, price is right, etc. HOWEVER, I discovered (after selling a design of course) that this stuff is nearly IMPOSSIBLE to remove from its backing via transfer tape -- which is kind of the point. It's not unusable, just very, very difficult to remove all of your design in one go. I made 6 decals, only a couple have been ok for use. Many of them tore the vinyl as the transfer tape got some of a letter, but not all, ripping U's in half, etc. I don't understand how it's so hard to remove, but this maybe explains why it was so easy to weed - because nothing's coming off this backing! Moved down to 1 star. It's literally not fit for its purpose. Back to 651 for me; you get what you pay for in this case. ** I was incredibly apprehensive about this vinyl at first. They went a little nuts taping the roll shut, first of all, I didn't appreciate that they wrapped it all the way around and made the seam in the same place as the roll's seam - and it was wound so that when you untape it, it tries to separate the vinyl from the backing. Anyway... Getting it out of the box and untaped, it feels very thin and very cheap - it's not paper backed, it's thin, malleable plastic. I cut it using the same settings I use for Oracal 651 and it cut perfectly. I *knew* it would cut all the way through, but it didn't. In fact, none of the apprehension I had is validated at all. It cuts extremely well, was super easy to weed - and I think the best part is that the backing was not rigid, it allowed the cut piece to lay flat which makes everything easier. This is my first cut with this roll, but I am liking everything about it so far. I don't know about longevity, or anything, but this is a good start! The only thing I am unsure of with this roll; it's supposed to be glossy white, but it has a kind of blueish hue to it? I believe this is due to the semi-opaque backing, but I'm just not sure yet. Give it a shot, it's definitely worth the price!

This is by far the best vinyl and value for your money that I have found! It has a nice feel, very pliable instead of that cheap brittle stuff I've gotten at other places. It's great for making car decals. It sticks to windows well, but it sticks to itself even better so be warned, you need octopus arms when layering decals! The only downside that I have an issue with is the adhesion to surfaces other than glass or metal. It's not really that great. I put some on a painted canvas, even laying a book on top overnight to flatten everything down and it won't stick for anything. Which is weird because most adhesive items will stick to fresh paint like nobody's business. But that is a small thing compared to it's usefulness in the decal realm which is what I bought it for. ** on the adhesive front, I feel i should mention i used this to make a stencil for screen-printing, and although initially it does not stick to the screen super well, making it hard to transfer, especially small details, it will stay in place while screening and rinsing the screen and if you leave it on there while the screen dries it will keep on sticking until you pull it off. Almost like the adhesive is water activated because it sticks better after the rinsing than it did to begin with! Love it!

I love this vendor's vinyl. I've bought a few rolls in the past, and their transparent transfer tape as well. Very good products. Must keep in mind that some of the shiny/sparkly/iridescent ones do have a clear protective film that you have to remove before cutting your projects on your vinyl cutter. This was my first major project with their multipack and it's honestly so much cheaper getting the multipack of assorted colors when you're doing on off projects with random colors. And they were sent in a nice plastic folder that keeps everything flat and protected. I have some decals on my car that I cut with their vinyl last September and they're still perfect after multiple snow storms.

Para alguien que va iniciando es un paquete muy bueno ya que tiene buena variedad,en mi ciudad solo venden por metros el vinil y comparar variado resulta costoso. ya he estado realizando proyectos y han salido bien.

The vinyl cuts great on my Cricut Maker, with seemingly decent adhesion to the backing. Unfortunately, everything pulls off the backing when weeding. I’ve tried other vinyls and have never had this problem. Beyond frustrating, making this product useless to me. I can’t say how well it adheres to the intended target item since I can’t successfully weed the image for transfer to transfer tape.

Bpa company who sells this product send a local cheap sticker paper not even close to the vinyl mentioned on the listing not even same size of packaging this is total fraud DO NOT GET CLOSE TO THIS PRODUCT OR SELLER

I love this product it is so easy to use. easy to cut, weed and transfer. I definitely buy again. The only thing when I received the package the vinyl package inside was folded in half which made it hard to use because of the crease.

Good