Paperfeel Glass Screen Protector Compatible with iPad Pro 12.9 6th / 5th / 4th / 3rd Generation (2022/2021 / 2020/2018), Auto-Alignment Tool, Tempered Glass, EZ Kit

The most easiest install. I’m horrible at screen protectors. They always end up crooked or there is dirt under it or I crack it. I even managed to screw up the ones that you place in a book like device and pull the film from the top. No problem this time. Placed the frame on top and that’s it. It basically does everything for you. As for the protector it’s self. It’s a different feel different look and take time to adjust but overall a great screen protectors that does give the feel of drawing on paper. More friction so less sliding on a smooth screen. Perfect fit no bubbles. Great price. I highly recommend.

Although I wish this came 2 to a pack for the price, this is still an amazing paper feel and screen protector in one! It applied to the screen perfectly and the squeegee that comes in the pack removed any air bubbles, but there were few to begin with, and it sticks down so hard it’s actually difficult to remove. It fit the screen for my model just right and the frame helped a lot with that. It doesn’t seem to affect touch sensitivity for drawing at all and is nice and thick so I think it will be durable enough to protect against scratches or cracks just like a regular tempered glass protector!

This is probably the easiest screen protector I ever had to install. Considering the size (12.9"), I was worried about trapping air bubbles and ended up with non. The screen protector comes pre-installed in the fixture and the steps are fairly easy. You can't skip any, other than maybe the proper cleaning. For that, the included "wet" towel turned out to be useless and I moistened it with lens cleaner. The (also included) microfiber towel is a bit small but turned out to be sufficient to clean off the solution. The dust picker strips are helpful and I simply dabbed around a bit to make sure I didn't miss a particle. Then the big moment. Remove the first foil to set the protector on the clean screen. Note the marking where to press and where not. This helps for the film to evenly expand and greatly reduce trapped air. In the end, i had very few that were easily eliminated with the included squeegee. The matte finish of the protector greatly reduces glare, but also a bit of brilliance in bright rooms. (Outdoor is difficult with or without the matte finish. The paper feel is a bit of a gimmick to me, but it turns out to be a good choice. It does reduce normal finger prints (unless you had some oil on your fingers).

Incredibly easy installation, which is what I'd hoped for. After the initial install, I had a medium-sized bubble in the middle and a small one near the edge of the protector which didn't seem to want to be squeegeed out with the provided tool. However, with some patience I was able to completely get both bubbles out completely. I've used other matte protectors in the past, including Paperlike, and have found this one to have more of a "tooth" than anything else I've used before. For the first time, I've switched over to the ballpoint pen-like nib on my apple pencil and kept it on; this texture's added enough resistance that I like having a smaller surface on the nib. I expect that this protector will get scratched up as have all the other ones I've used in the past, but will update once I'm ready to swap it out. One major downside to this cover is the plastic waste. It's unfortunate that the installation frame is single-use. When my initial efforts to get the bubbles out weren't working, I looked up Hocent's products to see if they sold only the protector in case I had messed it up and needed to start over. But it seems like they only sell the 12.9 version with the installation frame included. Kind of a bummer! If a reusable innovation came along, I'd swap over in an instant. Great product despite the single-use installation frame. If you're looking for something a little rougher that doesn't require so much fussing, I recommend it.

UPDATE from below: Not even 24 hours from the review below, it got worse. It was a complete waste of money. As a one time shot, not worth the money. --------- As an iphone (yes I know this is for an ipad) user since 2007, I have been fighting screen protectors for a long time. I need them to be straight, no bubbles, etc. So I always look for the alignment frame for help. I also want more than one protector in a package, because I almost always end up not getting it perfect the first time. So to find an ipad protector, that feels like paper and has the frame was much harder. But the reviews for this were pretty glowing. However, I knew not everyone probably is as picky as I am as far as wanting it perfect. And I just wasn't thrilled with the fact it came with only one. But I took a chance and also ordered two other kinds with out alignment frames in case this didn't work out. Well it almost worked out. A couple bubbles, that I was able to smooth down to nearly the sides. The alignment wasn't 100% onto the center. Which may be fine, except I was putting it back into its case. Well as soon as I did that, the screen protector lifted right back up on the side that was moved to far over. I took it out and had to readjust. Using the squeegee thing, its already scuffed up. I had to rethink about how I was putting back into its case. It's not at all perfect. But it will due for now, but I wont buy again. It's too expensive for this one shot thing only.

I recently installed the **Hocents Paperfeel Glass Screen Protector** on my **iPad 9th Generation 10.2-inch**, and it has quickly become a must-have accessory for enhancing my iPad experience. This screen protector not only offers **protection** but also provides a unique **paper-like texture** that makes drawing and writing on the iPad feel more natural. With the added bonus of an **EZ Kit** and **Auto-Alignment Tool**, installation was easier than ever. Here’s my detailed review based on installation, usability, and overall performance. ### **Paperfeel Texture for Writing and Drawing** One of the standout features of this screen protector is its **paper-like texture**, which is perfect for those who use their iPads for **drawing, writing**, or **note-taking**. As an artist and note-taker, I found that the **Paperfeel** surface offers just the right amount of friction, giving me more control over the Apple Pencil. It replicates the sensation of writing on paper, making it feel less slippery compared to a traditional glass screen. The texture makes it easier to create precise strokes and control line thickness, which is perfect for digital artists or students who prefer handwriting their notes on the iPad. ### **High-Quality Glass Protection** In addition to its unique texture, the screen protector provides excellent **protection** for the iPad’s screen. It’s made from **tempered glass**, which offers a **scratch-resistant** surface and protects against daily wear and tear, accidental drops, or bumps. Even with the Paperfeel texture, the screen protector is **clear and responsive**, so it doesn’t interfere with the touch sensitivity of the iPad. After using it for several weeks, I’ve noticed no decrease in display clarity or responsiveness, which is essential for both everyday use and more detailed activities like drawing or gaming. ### **Easy Installation with Auto-Alignment Tool** One of the best aspects of this screen protector is the **EZ Kit** that includes an **Auto-Alignment Tool**. Installing a screen protector can often be a tricky process, especially when it comes to lining it up perfectly without bubbles. However, the auto-alignment tool made the installation process smooth and hassle-free. The tool fits snugly around the iPad, ensuring the protector aligns perfectly with the screen. I had no issues with bubbles or misalignment, and the entire process took just a few minutes. For someone who usually struggles with installing screen protectors, this was a huge bonus. ### **Fingerprint and Smudge Resistant** The **oleophobic coating** on this screen protector helps to reduce **fingerprints and smudges**, keeping the screen looking clean and clear even after extended use. While it’s not 100% fingerprint-proof, it does a great job of minimizing the appearance of smudges, which is especially important for those who use their iPads frequently. Cleaning the screen is easy as well—a quick wipe with a microfiber cloth keeps it looking fresh. ### **Perfect Fit for iPad 9th/8th/7th Generation** The screen protector is designed specifically for the **iPad 9th/8th/7th Generation (10.2 inches)**, so it fits perfectly with the device’s dimensions, including the cutouts for the front camera and home button. It doesn’t interfere with any of the iPad’s functionality, and it sits seamlessly on the screen, giving a smooth, uninterrupted experience. ### **Pros** - **Paperfeel texture**: Provides a realistic paper-like feel for drawing, writing, and note-taking, offering more control over the Apple Pencil. - **High-quality glass**: Made from durable tempered glass that offers excellent scratch resistance and protection from everyday damage. - **EZ Kit with Auto-Alignment Tool**: The auto-alignment tool makes installation easy and precise, with no bubbles or misalignment. - **Fingerprint and smudge-resistant**: The oleophobic coating reduces fingerprints and smudges, keeping the screen looking clear. - **Responsive and clear**: Maintains the touch sensitivity and clarity of the iPad screen, with no interference in display quality. - **Perfect fit**: Designed specifically for the iPad 9th, 8th, and 7th generations (10.2 inches), with proper cutouts for the home button and camera. ### **Cons** - **Slight reduction in smoothness**: The Paperfeel texture may not be ideal for those who prefer the slick, glassy feel of the iPad’s original screen, as it adds a bit of friction. - **Not completely fingerprint-proof**: While the oleophobic coating helps, it’s not completely resistant to fingerprints, so occasional cleaning may still be needed. ### **Final Thoughts** The **Hocents Paperfeel Glass Screen Protector** is an excellent choice for anyone who uses their **iPad for writing, drawing**, or **note-taking** and wants a more natural paper-like feel. The **auto-alignment tool** makes installation a breeze, and the screen protector itself offers the perfect balance between protection and usability. It’s a game-changer for artists, students, and anyone looking for added control with the **Apple Pencil** while keeping their iPad safe from scratches and damage. If you’re looking for a **high-quality screen protector** that enhances your iPad experience while providing superior protection, I highly recommend the **Hocents Paperfeel Glass Screen Protector**. It’s a great investment, especially if you frequently use your iPad for creative or academic purposes.

The screen protector was good for the price. Installation was easy. I’ve had this protector on for about 6 months and have had zero issues with lifting, however I have noticed a few significant issues with this particular brand. I have several scratches and chips that are highly noticeable and kind of distracting. I went an entire year with nothing on my screen and received less scratches than I have with this on. The texture is very rough compared to other’s I’ve felt from my friend’s ipads. At first I liked it a lot but then I noticed when I draw the surface creates uneven lines. I used my ipad primarily for drawing so this is a bit of an issue. My brother who has some texture issues absolutely hates touching my ipad because he says it feels grimey. Overall I probably would recommend one of the more expensive options for someone using their device for more professional use.

Application easy, quality awesome. Rougher than my previous protector but a good texture, a non sloped edge- it would be improved with a sloped edge but I don't care. Paper feel protectors tend to create a subtle oil slick warp on lines when drawing but this one's perfect. Super clear! For art it's awesome, got so tired of looking at fuzzy lines.