SCULPFUN Laser Engraver Enclosure

Super happy with this enclosure. It was super easy and fast to put together. After looking around and doing research this was the best bang for the buck. Plus, it's fire resistant! We got this for our xtool D1 Pro 20w and it works perfectly. It has allowed us to bring the laser inside to work versus being out in the cold 🥶. One note for anyone looking to get one. The exhaust port is 3 inches. So make sure to get the right ducting size as tape does not stick to this thing for even a temporary fix haha. I paired this with a 6 in inline duct fan and a stepdown for the ducting size difference. We pipe this out an old unused cat door. 🤣 Again great product ⭐⭐⭐⭐⭐

Pretty neat! I do wish it had a spot to hang a light in it but it does the job. I taped down the bottom so no smoke could sneak out. Good value for the money overall.

Most diode lasers don't have a cabinet of any kind, and that is very unsafe! This material that forms the walls is (basically) fireproof, and the clear plastic front/top piece does have some light filtering ability, but I wouldn't depend on it. Use good glasses, depending on the type pf machine you have. It has a built-in 4" exhaust port for a smoke exhaust, but you need to get a fan and pipe, etc. The clear viewing window provides super good visibility, and is better than any of my other 3 CO2 lasers with steel cabinets. Once it is zipped up, there is little, if any, smell of smoke. This enclosure outperforms a standard CO2 enclosure in every way, and you can use it with another laser if you upgrade or something goes "POP." One caution: I have a 10 watt Phecda which can burn up to 400mm by 400mm, and it just barely fits! Be careful to measure everything to make sure you'll be okay in this regard. If only for the peace of mind it will provide, this is a great investment in safety.

Pro: Quick and Simple Assembly (good instructions) Stable and Functional Amazing Clearance for Camera's, Lights and Risers Perfect Fit for the Xtool D1 Con: Weird Dimensional Air Vent Size (I removed it, cut a backplate and 4 new holes for a 4in adapter) No cable hole (with Velcro flap) Plastic Window is not Laser Protection Grade Lime Green accents...

I purchased this enclosure for my 20 watt, XTool D1. Easily assembled and quite sturdy. I have a suggestion for attaching a vent tube to the exhaust fixture: A 6 ounce can of Bumblebee shrimp (less contents, of course) is a perfect connector. Advise using a can opener that makes a clean cut to avoid sharp edges. I used a Dremel tool to open the bottom of the can. I used electrical tape to attach the vent tube. It's a perfect and snug fit over the enclosure vent.

Works as advertised, only draw back is you have to purchase your own fan and ducting. The fitting supplied by the manufacturer fits a standard 3" dryer flex hose to use to remove the smoke from the laser. There is a 80mm fan I purchased from Amazon that bolts up ( AC Infinity AXIAL 9238, Muffin Fan, 120V AC 92mm x 38mm High Speed, for DIY Cooling Ventilation Exhaust Projects) but you will need a inline booster fan to help remove the smoke fast enough (VIVOSUN 4 Inch Inline Duct Fan 100 CFM, HVAC Exhaust Ventilation Fan with Low Noise for Basements, Bathrooms, Kitchens and Attics, Silver ).

Easy to install and workìs great

I bought this for indoor use and it works okay. I wasn’t real happy with the exhaust opening. It seems a little big and I ended up duck taping the air filter hose to the opening because it didn’t come close to fitting. The frame is okay but do not expect to use the camera unless you can rig it to the frame in some way where it will hold. All in all I can see the need but I didn’t like this one as much as I thought I would

I am still able to smell the burning woods and acrylics litte disappointed as all reviews I watched said they could not smell anything. Also the vent is not 4inch its more like 3.5inches. They should not advertise false info.

It is a decent product for the money. Disappointed it did not have a full bottom it was just a slipcover. Helps with the smoke and smells somewhat. Easy to assemble. Ours was missing pieces but still managed to patch together. Waiting for pieces to get shipped.

It works as described but the exhaust port really should be sized to bolt a PC case fan to it. And maybe have a kit option available with a fan and hose. Good luck finding a 3.25 duct and fan for it. It’s not 4” by any means.

Es muy buena opción para las máquinas nuevas para casa de corte laser solo verificar bien que si te de las medidas de tu maquina.