Ekena Millwork PNL20X28AS-01-CASE-2 Ashford Molded Classic Wainscot Wall Panel, 20-in. W x 28-in. H, Factory Primed White, 2 Count

My interior hollow doors were extremely boring (and ugly). I needed something to make them have more character without buying a miter saw. I am extremely satisfied with these! Came beautifully packaged with no cracks. They are light weight and I used liquid nails to put them on the doors. First I painted the doors, then did this step. I used blue painters tape to “hold” them firmly overnight after I put them on. This helped with gaps.I did this on 7 doors and love every one of them. People can’t believe they are the same doors. Highly recommend! Solo project

Product came nicely packaged and had proper protective material to avoid damage. This is important since product is made of foam. (Ridged strong foam, but still foam) I ordered a 12 pack and none were damaged. Some however were slightly warped or not Square. This wasn’t a big deal as there is a lot of play, while installing, to get the make to square angles. I used construction adhesive specific for foam and tacked them into place with a nail gun. Installation was a breeze, once spacing is configured. They look great.

I used dabs of locktite P3 and a pneumatic nail gun to install. I would not recommend hammer and finishing nails as the panels are fragile. Locktite alone will not hold these in place as the locktite takes awhile to cure and the panel will give into gravity, perhaps adhesive and painters tape may work but I didn’t want to take a chance on making a big mess and wasting a panel. The nail gun was set to lowest penetration and the holes were easily patched with painters caulk and then painted. Far cheaper and loads less work and headache than building the frames myself and after painting I cannot tell the difference. The ordering, measuring and placement was the most difficult part as spacing, wall length/height and receptacles drive the panel size so be prepared to spend a lot of time in the ordering process. I used a cheap B&D laser level and Kreg multi measuring tool to get my intervals. Installation of the entire 14x15 room took less than two hours including caulking.

Moldings came in well-packed and quickly. I am a 66 year old grandma and installed it myself. Super easy to install. Used white lightning speed grip from Sherwin Williams to adhere the panels. These panels gave a "high-end" look to an otherwise drab wall and peninsula. So classic and affordable and it will never go out of style !I ordered 4 too many and had no problem returning for full refund. I would HIGHLY recommend this product for a custom designed look. Use your imagination !

I love this company I love their friends as I call them. Are use them to dress up my new vanity doors and drawers which were originally just flat plane doors and drawers. These frames gave them a more upscale look in my opinion. Are used Dixie Belle chalk paint that I mixed to match my vanity they took the paint with no problem I then addedDixie Belle gator hide clear topcoat because this is a bathroom vanity. I wiped them down to make sure that they would be waterproof and they are after painting and ceiling then I have used this company’s frames and appliqués in many applications in my home and I am never disappointed. I applied them with gorilla glue construction adhesive and I never have a problem with them coming off

PLEASE...do not give these items a bad review if you don't realize what they are! These "picture frame mouldings are for your wall to give you an elegant and charming look...more like jewelry for your walls. They are usually used on the lower walls...often with chair railing moudings above it. They are not for framing photos and posters! I do not work for this company and do not know anyone that works there. I wrote this because of bad reviews of people buying this item expecting it to be like a photo or poster frame!

I loved this panels so much I bought three in my first order then two more to mirror the other side of the room. They add sophistication to my apartment instantly. I used mounting tape to attach to the wall since I want minimal damage. The panels are light so maneuvering them was not an issue. They’d break under extreme force so don’t be reckless.I also used a panel to frame my makeshift mirror for my vanity corner. They’re very handy.

These are meant as decorative millwork, used below a chair rail in a dining room for example. They’re not actual picture frames. Bad reviews just don’t know what they are buying, description is pretty clear.

This picture frame moulding is great! I had to laugh at all the reviews about it not being an actual frame for a picture. It is clearly not. This is for your walls!This brand has been consistently great. I have purchased many of their ceiling medallions and they look amazing.It is a bit pricey for what you get. But it’s convenient. At Home Depot Canada you can’t buy this product in store anymore. Depending on the size of rectangle you need, you could make this with MDF trim for about half the price. Real wood, it’s about the same or even more for the decorative wood trims right now. You would also need a mitre saw. If you don’t have this or care to bother with making your own, this is a great product.It’s a thin composite polyurethane foam. It arrives backed on cardboard, so take real care of it or you will snap it. You can adhere it with some construction adhesive or use a few finishing nails with pre drilled holes (my nail gun would break it in a heartbeat). If you use adhesive, you should apply painters tape to hold it in place while it dries (buy the quick dry construction adhesive!). Use some caulking to finish all the edges and cover holes. And then paint with regular latex paint.

Anyone buying a frame assumes it'll come with some pad in back to hold photo in right? Not this frame. One assumes a stand in back or hook to hang right? Not this frame. One assumes glass or some protection for photos right? Not this frame. This is literally just a cheap fragile foam frame. A RIP off.

Worked as intended, for adding decorative moulding to an interior door. Affordable, lightweight and easy to apply. The product was shipped very carefully - unfortunately I wasn’t as careful - but this was seamlessly rectified with a drop of superglue.

Beautiful frame. Well made and delivered without damage because it was well packaged. We thought the inside frame was 12 x 20 inches but the measurement was the outside frame. We were able to make it work.

When the frame arrived the planks were much wider than what was in the description - definitely closer to 2in.