The hobbyworker Wire Bending Jig,Includes 30 Metal pegs for Jewelry Making Tools and Wire Wrapping Supplies

Perfect for my new hobby of jewelry making. Easy to use & good value. Only complaint is plastic pegs do not fit the holes

It was smaller than I expected, but my fault. I didn't read size. BUT, it turned out to be exactly what I needed!

This product is useful if you are just starting to learn to make wire wrapped jewelry. It is quite easy to use. However, it is a little difficult to keep the pegs in place while you are using them to bend the wire. The pieces themselves are very durable, but sometimes while you're bending the wire, it gets caught under the pegs and that gets a little frustrating. Overall, it helps when your just starting your journey into making home made jewelry. And the price is reasonable.

This is a great value little set. It comes with a page of instructions and examples of patterns.As others have mentioned, the pegs are a little wobbly if you don't use the little plastic sleeves to lock them in place.The reason for the wobble: The holes in the board are 3mm in diameter. The pegs are exactly 2.5mm.However... Rather than being a negative point, I see it as a huge positive.If you are even a little handy, you can get an M2.5 die (thread cutter) and some M2.5 nuts. As the the die is designed to cut threads in steel, the aluminum pegs are very light work, even without lubricant. Tighten the nut on the underside of the board and the wobbles are gone. It's also far sturdier than the plastic tubing. (Warranties may be voided)This also means if you need additional narrow pegs, 16mm or 20mm long M2.5 machine screws work perfectly as well. And you can use two additional nuts to lock the ends of the wire in place if that's needed (I find it useful). It took me under 15 minutes to thread all 30 pegs, and I never have to look at the plastic sleeves again.Great value, quite sturdy and absolutely perfect for what I need it for.

I guess you get what you pay for. It’s a great concept but the machining isn’t as good as it could be and it affects the overall functionality of it. The pegs on the unit I got sit too loosely in their slots and to compensate you are given plastic sleeves to put on the bottom of the pegs in the lower side of the tray. If you don’t use them, then good luck bending anything without the pegs constantly moving and falling out. I would recommend avoiding this and spending a little more on one of better quality if you plan on using it regularly.

This is great! First time with a wire shaping jig. Great for what I'm using it for

I wire wrap and wanted a decent jig to enhance my designs. This is a decent jig metal with metal pegs and little rubber stoppers for the back that helps keep the pegs where you put them. It's very sturdy.

When you add the rubber tubes underneath to the hold the pegs in place, it wobbles because the tubes are longer than the “table legs.” The tubes are flimsy and I find them challenging to get on and off the pegs.Other than that , the quality feels good and solid. My first project was the dragon fly on the sun catcher, which I’m pleased with. Makes it much easier to get the wings even on both sides. I look forward to seeing what else I can do as I learn and experiment more.