ARCTIC P14 PWM PST A-RGB - PC Fan, 140mm PWM Case Fan, Optimised for Static Pressure, Semi-Passive: 200–1900 RPM (0 RPM <5%), 5V 3 Pin A-RGB LED, Single Fan - Black

The ARCTIC P14 PWM PST A-RGB 140mm fan has been an excellent addition to my build, serving as the rear exhaust in my Corsair 7000D Airflow case. It pairs perfectly with my ARCTIC Liquid Freezer III Pro 360 A-RGB, XFX RX 9070 XT, and Ryzen 9 9950X3D setup, helping to maintain stable case temps under load. What sets this fan apart is its strong static pressure performance and semi-passive operation — it runs at 0 RPM when not needed, keeping the system whisper-quiet at idle. The integrated ARGB lighting is smooth, vivid, and syncs effortlessly with the rest of my setup via the SC790 hub and ASUS Aura Sync. Installation was simple, and the black frame with translucent blades looks sleek without being flashy. Despite some opinions that rear exhaust fans aren’t always necessary in positive pressure setups, this one made a measurable improvement in air evacuation and GPU temps.

I got these, phanteks, noctua, etc, to compare them all and these won hands down. Rly no contest, and given the price they're unbeatable. Much quieter than competition, and more airflow than many. The argb thing is easy and works like a charm. Not my priority as I have a nonwindowed case and don't care about bling, but it works fine and the daisy chain is a great feature that works flawlessly for both fan speed and argb. I ended up putting the more expensive noctua on ebay and the phanteks in a closet as a spare, and even replacing my thermaltake cooler fans w/ other artics fans. These ARE the fans you're looking for (apologies to Obi Wan Kenobi). ----- Update--- One thing worth noting is there is substantial variation in noise levels from fan to fan. For most folks it won't be an issue, but I need really quiet fans (my room noise level is 22db, typically, and I'm right next to the computer trying to listen to what I'm actually doing, not the case!). Of the half dozen I got, they became audible (inside a low noise case, at 1-2m) anywhere from 31%-66% duty cycle. Next time I'll get a spare or two and cherry pick the quietest before finalizing my build. Still, even the noisiest of these was better than any others I tried.

These fans are still going strong in my PC build. They were very easy to install, have good cable length, and vibrant RGB. The fan speed was very easy to control in the BIOS an set for CPU temp to help with airflow. Great price for what these deliver.

I built my pc in the SSUPD Meshlicious and wanted some powerful and quiet fans for the front of the case. Originally I started with the Arctic p14 PWM fans and they performed fantastic but had unbearable bearing noise at multiple ranges. I had seen the newer versions of Arctic fans with the outer ring attached to individual fan blades was performing similarly but had solved the bearing noise issue Arctic older models had become infamous for. I picked up two of these and they perform fantastically. They are rather quiet while moving significant amounts of air. I have tried several fans in this pc to find what I liked including thermaltakes tough fan 140, NZXT aer 140, phanteks 140, Arctic p14 PWM, and finally these. These are the most quiet and also seem to have the most static pressure at reasonable RPM’s. The RGB looks pretty good but not the best. I’d give the RGB 7/10 and again, best value option.

Very good is all I can say. I got this because the Arctic fans on my AIO cooler were also great, and their standalone fans match the quality. Very quiet, cool, and is made of strong materials. My only problem is that the cord is a little short, so without extensions my fan had to be mounted upside down (not that you can visually tell). The RGB is very nice and mine came with a 10 year warranty.

The other day, the fan on my Zalman CNPS9900MAX-B CPU cooler began making an obnoxious scraping noise and running slower than it should've, pretty sure the bearing was starting to fail. The fan was itself a replacement, a Phanteks ARGB fan I'd modified to fit the odd fan mount on the cooler, so I already knew what I needed to look for: a fan with all the LEDs in the fan hub, so I could chop off the frame without compromising anything. This Arctic fan fit the bill perfectly, so I went ahead and ordered it and when it arrived today, I set to work. I clipped off the struts attaching the center part to the outer frame, after un-routing the cables and tucking them out of the way of course, and drilled two small holes for the tiny screws that would secure it to the cooler. Then I reassembled the cooler with the new fan and wow, does it look sharp. It cools better than the old fan, too, idle temps are as low as 38°C in my 21°C bedroom. If you're still hanging on to one of these Zalman coolers, I highly recommend getting this fan and modding it, it's perfect for the job!

I ordered a series of these Arctic P14 fans to accomodate and complete my symetrical installation of my ARCTIC Liquid Freezer III AIO. I have nine Arctic fans in total in this push pull configuration. I appreciate their efficiency and low noise levels. I do wish the back side of the fans looked as good as the front. Build quality is great and they are priced very well. I do wish the cable length was inducive to daisy chaining a series of fans without the complication of how the connectors might get in the way of a clean looking install. I had to spend a good deal of time during this part of the installation alone.

I bought a case from a different company. Ripped out all the fans that came with it and replaced them with these. In the youtube videos I watched this fan preformed the best for both case cooling and radiator cooling. In my experience its about as silent as a case fan can be, my temperatures are always under control and the rgb is bright and there are enough LEDs to do a bunch of fun stuff. Its not just a case fan, its THE case fan.

Der ARCTIC P14 PWM A-RGB ist ein leistungsstarker 140-mm-Lüfter mit adressierbarer RGB-Beleuchtung. Es ist für den Einsatz in PC-Gehäusen, Heizkörpern und anderen Anwendungen konzipiert, bei denen ein hoher Luftstrom erforderlich ist. [Bild des ARCTIC P14 PWM A-RGB-Lüfters] Der P14 PWM A-RGB verfügt über ein einzigartiges Laufraddesign, das für statischen Druck optimiert ist. Das bedeutet, dass es viel Luft bewegen kann, selbst wenn es an einer engen Oberfläche, wie etwa einem Heizkörper, anliegt. Der Lüfter verfügt außerdem über eine PWM-Steuerung, mit der Sie die Geschwindigkeit des Lüfters an die Temperatur Ihres Systems anpassen können. Der P14 PWM A-RGB ist außerdem mit einer adressierbaren RGB-Beleuchtung ausgestattet. Das bedeutet, dass Sie die Farben des Lüfters individuell an das Thema Ihres Systems anpassen können. Die Beleuchtung wird über die ARCTIC RGB Sync-Software gesteuert, die mit den meisten großen Motherboard-Herstellern kompatibel ist. Leistungsmäßig ist der P14 PWM A-RGB ein sehr leistungsfähiger Lüfter. Es kann bis zu 72,1 CFM Luft bei einer maximalen Geschwindigkeit von 1700 U/min bewegen. Auch bei hohen Drehzahlen ist der Lüfter sehr leise. Insgesamt ist der ARCTIC P14 PWM A-RGB eine gute Wahl für alle, die einen leistungsstarken 140-mm-Lüfter mit adressierbarer RGB-Beleuchtung suchen. Es ist gut verarbeitet, leise und effizient. Hier sind einige der Vor- und Nachteile des ARCTIC P14 PWM A-RGB: **Vorteile:** * Hoher Luftstrom * Leiser Betrieb * Adressierbare RGB-Beleuchtung * PWM-Steuerung * Lange Lebensspanne * Erschwinglich **Nachteile:** * Nicht so ästhetisch wie einige andere Fans Wenn Sie auf der Suche nach einem leistungsstarken 140-mm-Lüfter mit adressierbarer RGB-Beleuchtung sind, ist der ARCTIC P14 PWM A-RGB eine großartige Option. Es ist gut verarbeitet, leise und effizient. Außerdem ist es sehr erschwinglich und bietet somit ein hervorragendes Preis-Leistungs-Verhältnis.

Ottima ventola utilizzata out take posteriore, bella e silenziosa. Sostituita solo perché il dissipatore enorme richiede a spazio, quindi ho montato lo stesso identico modello ma da 12cm. Arctic sinonimo di qualità, nient'altro da dire.

Bonjour Ventilateur de très bonne qualité , bruit contenu , prix convenable argb après plusieurs mois fonctionne toujours parfaitement je recommande ce produit

Lo que me ha sorprendido es que a bajas vueltas, se oyen muy poco. He puesto tres de ellos en una H7 flow y a 1000 rpms casi ni se oyen y mueven bastante aire. Claro que todo esto son afirmaciones que no puedo respaldar con datos. Uno de los 3 que pedí hacía un pequeño ruido como un "ts ts ts" de que estuviera rozando algo o no sé, al par de días después ya no lo oía. Misterios.

Fantastic lighting. Decent build.