GOOACC 820Pcs Car Push Retainer Clips Auto Fasteners Assortment -36 Sizes Nylon Bumper Fender Rivets and Fasteners Remover for Ford GM Toyota Honda Chrysler BMW Benz Nissan Subaru Audi Mazda

Oil change techs lost the screws that hold these items to the car and I found that these things are perfect for that job. I only used a few and left the rest in the glove box for the next time I need them.

Amazing quality and price worked perfectly for my 17 honda acord ex sedan secured all the bumpers and plastics perfectly!

These fit my 2005 Honda Accord. Great value and installed easily. You will need one size larger to complete a bumper install as there are several holes that require a larger one. If your just replacing fasteners where you can see them then this works.

At the parts store these cost $3-4 each and at Honda over $5 each. These work just as well and cost about 15 cents each. With several Hondas it is worth buying and keeping a few on hand.

Bought it at auction and the bumper was barely attached. Most of these were missing all around the car.These worked just like oem, and the whole pack cost less than only two at AutoZone

Very pleased, exact replacement for the clips on a Yamaha Rhino. They also seem very sturdy and not easily broken.

I do not work for this company. I am a weekend mechanic and I have worked on a lot of cars over the years taking off plastic trim, etc. especially Hondas. I personally hate when these plastic clips are missing on the finished parts, but that's just me. A lot of car owners never even pop their hood!These are very good quality for the price. I actually took out an old plastic clip that was original OEM and compared to these- they are pretty much identical. The plastic quality also looks about the same as the originals. For people who argue these are not the same quality plastic as the original manufacturer - let me tell you, if your car is greater than 10 years old, try to pop some of the original clip fasteners off and see how many crack and break! These new ones will be superior quality to the original ones on your car, because they have not been out in the elements for years. And with these you are not paying close to $1 per clip if you go to your local dealer.Someone also wrote the 40 pieces counts the separate parts and you really have 20. I don't know how someone could miscount, but let me be clear, it is 40 total usable clips. You will use more than you think, especially when you inspect the old ones and see how deteriorated they are.Again these work great on Hondas (for me specifically on a 2007 Honda Accord). You just have to measure the hole and if it is 10mm these will work. Not all plastic fasteners on a car will match this, but most any plastic inserts under the hood, and front and rear bumper attachments. You cannot tell the difference from the originals visually- they are a perfect match!

Removing the old ones usually results in broken pins. The new ones make the job so much faster

Die Abmasse sind genau. Aber die "Deckel"oberhalb der Clips sind hart und geben nicht nach. Dadurch rasten die Clips schlecht ein.

Higly recommend

Gut und günstig

Good value does the job

I thought these were great, the quality seemed good, they looked just like what you'd buy from the dealer for a ridiculous price. I was almost right. The one thing I would deduct a star for was that they were prone to breaking. When I went to install them, I had to back the center rivet portion out to collapse the outer sides of the clip to get it to fit in the hole of the bumper/body frame. To do that, I needed to carefully spread the four appendages that made up the sides of he clip. I was careful and only spread them a small amount but this resulted in the appendage snapping off at the base. Admittedly I was doing this outside in the winter, in -3 to -5 degree C weather but nylon should easily handle that kind of temperature. I'm thinking that not all grades/formulations of nylon are created equal and the grade used was not as good as the OEM version or that there was too much "regrind" added to the virgin material at the time of molding. Hard to be sure but the end result is the same,...the material seems to easily snap (brittle) such that when I go to remove these clips in the future, I'm worried they will break when I try and remove them. Time will tell, but for the price you could just consider them one time use rivet clips.