10pcs 25V 10000UF Capacitor 18X35mm(0.7x1.38in) High Frequency Aluminum Electrolytic Capacitors for TV, LCD Monitor, Game(25V 10000UF)

Working perfectly for what I needed them for

I can't comment on accuracy of description. I used this with a diode to keep the stereo going through the voltage drop of starting up our ski boat with all the key off and ons. Keeps the radio going for a few seconds after the radio is switched off.

Use these for smoothing 24v LED strips. Good stuff.

I have a small-ish audio amplifier that I suspected could produce better audio if the input voltage was more stable. Any time you have an audio device with a transformer on the wall and a low-voltage cord, it is likely that the voltage is drooping on the amplifier side due to the sudden power draws of bass and the resistance in the cord. After putting one of these directly on the power pins of the amplifier, the sound is SIGNIFICANTLY sharper.Of course, this voids the warranty on your audio device, and certainly poses a risk of damaging it. Also make sure you know the voltage going into the amplifier, and get a capacitor for a higher voltage than that. (I first bought 16V caps thinking the supply was 12V before realizing the power supply was actually 19V) These capacitors are also large, so make sure you have room first.Physical dimensions are 34.9mm tall and 18.2mm diameter for the shell, with negative lead 20.5mm and positive lead 25.8mm, spaced 7mm apart.

Great product

Perfect product. Used as a smoothing capacitor.

After measuring the capacitance of these capacitors they are around 3500uF, not even close to what is advertised.

1 out of 10 was crushed, 1 was dented. I discarded these 2 as too risky to use.The 8 usable ones all measured on the lower side of -10% tolerance at room temperature (67 deg F). I used 2 different capacitance meters.Only time will tell if these last in my arcade power supply. I hope I am wrong, but I suspect I will get what I paid for ... and these are very inexpensive!