الوصف
- About this item
- Milagrow robophelps 40 is engineered with the strongest pumps and finest filtration in the industry. It removes more finer particulate matter while thoroughly mixing the water in your pool, thus substantially reducing the amount of chemicals needed. It all adds up to fewer chemicals and a healthier swimming pool. It works on smart Z programming for systematic cleaning of stubborn dirt, debris, chemicals and algae too.
- The RoboPhelps 40 moves with linear jet propulsion technology and can clean a pool of upto 80 mtr at a maximum speed of 120㎡/h or 1300 Sq Ft /hr. With up-to 4 drive motors they can climb walls up-to 6 ft without any difficulty. Their filtering or suction rate is up-to 18000 liters / hour giving them an average operating cost per hour of just 4.5 Rs.
- Milagrow RoboPhelps 40 saves upto 93% of energy as it is powered by low voltage electricity, rather than a booster pump. Since the pump runs less, energy costs are reduced.Its in-built filter further reduces the use of a pool's primary filtration system, lowering energy costs even more. The pool robot saves upto 30% on chemical usage with better water circulation. All debris is self contained in the unit and does not add strain to your filter system, thus also saving upto 90% of water.
- Milagrow RoboPhelps 40 suits all types of residential and commercial pools. It tackles pools of all shapes and terrains, and climbs over obstacles without getting stuck, whether above ground or in ground residential pools. The Robophelps cleans all surface types- tile, vinyl, fiberglass etc. it scrubs the floor, walls, coves, and tile lines. It has a self contained vacuum bag that eliminates the need to clean your cartridge filter after vacuuming of the swimming pool.
- It is also very easy to operate as it requires no installation. Just plug it in and place it in the pool. The robophelps rights itself when inverted on existing the water in a beach entry pool, it will reverse and attempt to re-enter the water. The motion sensors allow the robot to automatically sense its position in the pool and adapt its path for optimized cleaning while reducing cord tangling.
Robotic Programming: Smart Z programming for Systematic Cleaning. Robotic Balance: Rights itself when inverted. Robotic Reverse: If RoboPhelps exits the water in a beach-entry pool, it will reverse and attempt to re-enter water. Robotic Injury Protection: The impeller automatically stops within 1 second if it is taken out of water while it is working. Robotic Self Preservation: The impeller stops working in case some large foreign matter is obstructing it. Robotic shut off: Shuts itself at the end of the cycle. Types of Pools: It cleans all types of pools: Above Ground and In-ground Residential Pools of all shapes, all types Tile (large & small), vinyl, Gunite, Fiberglass. Cleaning Performance: It cleans a Maximum Area 4200 Sq Ft in 4 hours and has a Filtering or Suction Rate 18000 Litres/Hour. Cleaning Features: Cycle Time and Timers You can select from 3 settings 1h (Pool size less than 1000 Sq ft), 2h (Pool Size less than 2000 Sq ft) or (4h Pool Size greater than 4000 Sq ft). Method of Movement: Linear Jet Propulsion. Pool Cleaning Speed: Max 120㎡/h or 1300 Sq Ft /h. Ground Moving speed: 780 metres/hour or 43 ft/minute. Cleaning Roller Width: 34cm (Approximate 1.1 ft or 0.34 m). Floating Cable Standard Length: 20m, i.e. 66 ft approx. Maximum Climbing Height: 180 cm (Approx 6 ft or 1.8 m). Filter Bag Porosity: Standard: 70 micron which is much smaller than the thickness of human hair. It can be changed according to the needs by selecting different filter.
