TISINO XLR to 3.5mm Jack Cable, Balanced XLR Female to Mini Jack Aux Adapter Audio Cord for Shotgun or Condenser Microphones - 30cm

This is a great quality item, but just be aware that the wiring is this as follows: Pins 1,2,3 of the XLR are connected to pins 1,2,3 of the mini jack. It is standard BALANCED MONO configuration, and perfect for connecting a balanced mono output to a balanced mono input. If you want to use this to connect a mono XLR balanced microphone cable to, say, a camera microphone STEREO input, you will get a stereo audio recording with left and right channels out of phase (which is what 'balanced' basically means). Opposite phase signals will cancel when summed to mono and also sound strange in stereo and induce a sea-sickness sort of feeling. This application of the adapter will require inverting the phase of one side in the edit stage, or using a further XLR adapter or similar to connect XLR pin 2 or 3 to ground (make it dead) and connect pin 2 to both pins 2 and 3 (which will 'un-balance' the XLR side before connecting to this adapter)... hope that helps audio novices

🔎The TISINO XLR to 3.5mm Balanced Cable Adapter is a well-made, good-quality adapter with a gold-plated mini jack connector.It is short so will work best for the connection when you don't need to plug a device far away from the source.🧡The short length allows me to keep it in the small protective pouch, along with my sound recorder. So I always have it on hand, when needed.A good quality signal is provided using this adapter.👎none so far⏳I have not experienced any issues with the cable so far.💡You can also use an extension cable for situations, where a longer distance is required.An example of a good-quality extension cable:https://amzn.to/3GQLYen💲This adapter represents a very good value for the money. Highly recommended.

Nothing to add

The cable looks well made and robust, but when I tried to connect an XLR mic to a jack connection, the audio had a loud buzzing noise on it and was totally unusable. I replaced the cable with a Sennheiser one instead, and that worked perfectly.

Item was used for connecting Bluetooth modual to remote speaker. Completely functional successes.

But did not work as I'd hoped it would. Probably more my fault for not doing proper research.

Great quality cable but we really needed it to be the exact length and it is a touch short so it cannot be used as a lead to go from a Rode shotgun mike (NTG4+) to any of our video cameras. Ended up using an additional short XLR patch cable. Very unsightly and unwieldy.

The media could not be loaded. Good quality. nice and tidy. watch video