WT03 Micro FPV AIO 600TVL Camera 5.8G 25/50/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft

The packaging was decent, the instructions were easy to follow and was able to set it up and get it running in about 2-3 minutes. The camera quality is decent for its size. The range at max is pretty good and will not loose signal when going behind a couple walls in your house. The speed is pretty good and it feels like there is little to no delay from the goggles to the vtx. The only things to keep in mind is that the unit gets very hot when used at max power and the antenna is easy to bend so be careful when setting it up. Otherwise it’s a quick and fun way to add a VTX and Camera unit to your drone or rc car.

I bought two of these cameras with built-in transmitters. I installed one on my modified Inductrix (Tiny Whoop) after the old camera I was using died. Installation was just as easy as the first time around, but this time I was able to set the transmitter power to 50 mw instead of 25 mw, which made a real difference when flying indoors. No more video loss! I installed the second one on a 1/10th scale RC car (just stuck it on the wing with some double-sided foam tape) and set that one to transmit at the 200 mw level. It has great range! I actually lose RC control before I lose video on the car. This is a perfect camera if you're building an indoor racer (quad or RC car), and I think it would probably be OK to use on a small outdoor racing quad as well. For sure it's more than good enough for a dirt track FPV race truck or buggy. Setting the transmitter frequency is very easy thanks to the blue LED display. And the video quality is surprisingly good, especially considering how small and lightweight the package is. For this price, I'm absolutely thrilled with the performance.

Excellent little cameras. I stuck them on Tamaya Mini 4WDs. Paired quickly with my Fpv monitor. Regarding the battery connector, you will need to get JST-PH 2.0 Female Connector Cables (come in packs of 10 male/female, search on Amazon) to splice to the camera lead. Just cut off the 1.0 connector on the camera lead and then solder red to red, black to black. Polarity is correct. Then you can use cheap 1S batteries with a 2.0 male connector. Knocking a star for not having a 1.0 to 2.0 extension in the box.

I had been toying with the idea of getting into FPV flying with my RC airplanes for a while, and one of our club members pointed me towards these camera/TX combos. While I wouldn't consider this camera for photographic missions, it gives a good, clear image from a compact, lightweight package. It has the additional feature of a wide range of selectable channels, so that worry about channel conflicts at a flying event is minimized, and selectable TX power level, so if you're mounting it on something that will be staying close-by, you can reduce the battery draw and TX heat of the unit. It does get hot on the highest power setting, so having a mount with reasonable airflow is a consideration, along with not leaving it powered up for long periods with the model sitting still. Anyone looking to get into FPV without breaking the budget will find this camera/TX combo a good option.

Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 40CH 25mW/50mW/200mW adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft This camera really impressed me with range. I have used it on all the power settings. I was actually very surprised and now I am experimenting with the various channels and power settings to see if I can get a clearer video feed from the camera for even longer runs. I will update this review soon with a video I made of the feed the camera gives. The WT03 camera is great for flying FPV and aerial views. I noticed little if any lag. With it mounted to a quadcopter, it got out to just over 700 meters before the FPV feed from the Wolfwhoop WT03 camera started cutting out and I had to turn back. That is very good range for this camera. There were no trees or anything else in the way...it was a straight shot, so I am not sure about the WT03's range in more congested areas. I have flown it on several quad-copters with similar results. The camera feed looks pretty good, and it definitely handles the bright sun and even lower light conditions well enough to enjoy it. This is a great All in One FPV cam to install on an RC quad-copter, plane, or ground vehicle. I love to see the view from the air. I will most likely be purchasing more of these. If you found this review Helpful, please check Yes. Much appreciated, Willy C

Works well!!!!! A good purchase. These are the only ones I use as of late

is usable for night flight. the system is very good for the money. it gets hot so be sure that it has constant airflow to cool it. direct line of sight recommended for best reception.

Pretty useless when it doesn't interface with standard 1S Lipos. Bought the GNB 520mAh 1S LiPo w/ JST-PH 2.0 and this camera is not compatible. You wouldn't really know that though since nothing even close to describing the interface, except the simple sentence in the description to just hook it up with your 1s lipo. It may be 1 star, but who knows since I have to wait now to get a bunch of connector changers to get this to power on. We love our cheap overseas products though.

Too much Heating problem

Very good for light aircraft

中国製なので 未だに 到着してない

Funcional y adaptable, ya la estamos usando, pieza de buena calidad

Works well. Very compact. Great for models.