Specialty Products Company 81260 Alignment Kit

I recently purchased the Specialty Products Company 81260 Alignment Kit for my Honda FIT RS, and I can confidently say it's been a game changer for my tracking experience. Before the installation, I was battling some pronounced tyre roll on the side wall.The design allows for up to ±1.75° camber adjustments, I got 1.5 on my left and 1.7 on the right. Following the clear instructions, I removed the upper bolt, installed the EZCam, loosened the lower bolt, and dialled in the precise change I wanted.After the installation, I took the car to the track in August 2023, the difference was night and day. The amount of tyre roll had drastically reduced, and the cornering felt sharper and more responsive. The handling improvement gave me much more confidence in my car's capabilities.A few points worth noting:The product feels durable, weighing in at 6.4 ounces and with a painted exterior finish.The kit is made in the USA, which gives me confidence in its quality and craftsmanship.Amazon's 30-Day Return Guarantee provides peace of mind, but given my experience, I don't see any reason to return it.In conclusion, if you're considering improving your car's camber for a better tracking experience, I highly recommend the Specialty Products Company 81260 Alignment Kit. It's made a difference for my Honda FIT RS. Happy tracking!

Installed these on both sides of car to reduce the negative camber that was wearing tires only on the inside edges. This corrected toe out too at the same time so no need for alignment. Drives perfect now.

After replacing struts on my 15 Grand Caravan I wound up with -1.5 camber on the passenger side and +.2 for driver side, ride height being good. Obvious being in the strut manufacture. Using kit 81260 and my rim clamp with Longacre digital caster camber gauge dialed in -.3 for pass. and -.1 camber driver side per specs. Easy to install and bolts are high quality being torqued to 97 ft. lbs.

2000 Subaru Impreza Outback SportAs a disclaimer, this rant is purely because of frustration over the need to think about what these bolts are actually doing inside the knuckle. As opposed to being able to blindly follow instructions. That being said, I am completely satisfied.They do the job just fine. Good build quality and have clear instructions and torque specs. Only problem is that the instructions are reversed for a McPherson strut Subaru. The instructions and picture describe how to install the bolts to achieve more negative camber. But that is incorrect. If you install these in the top clevis of a rear McPherson strut the lobe needs to be facing inwards towards the motor so as to essentially push the top of the knuckle inwards thus inducing negative camber. The reverse is how they should be installed in the bottom clevis of either the front or rear, Lobe facing outwards to induce negative camber.

I have a 2005 mb c320 base model. They were designed to be installed on a c230, Amg, or awd for easy installation. It’s works for the c320 base but with a little modification. After your wheels are off. Remove the strut bolt and replace it with it with the adjustable cam bolt you just bought. Next is to loosen the two bolts holding the strut to the spindle. It’s get tricky after this but it works. Adjustable the cam bolt to correct your camber. You make have loosen the two bottom bolts more as you continue to adjust your camber. One your camber has is set, lock that cam bolt down and torque it so it doesn’t move at all. Now the fun part. Your strut is now at a angle which means you got some serious torquing to do until it’s all flush on the bottom two bolts. You will get a 1.75 camber adjustment as described but you will need the other cam bolts installed as well for a more accurate camber adjustment. They go +0.3, 0, -0.3 which replaces your lower control arm round bolts. Mb are wonderful people right. Alignment shops will tell you all day long that they cannot adjust the front camber. I am telling you how. You will need two of the 28810 bolts that are sold separate on top of the set you just purchased or will purchase from this listing. Hopefully this helps someone

I have used these before on three or four cars when alignment shops cannot bring camber adjustment into range. These are strong, reliable parts that are well-priced and install quickly. The box contains clear, complete instructions. If you can't install these yourself, don't let someone charge you a bunch for an easy job. (Ford Crown Vctoria, Chevy Impalas)

USPS lost the part. Got a replacement really quick. Would recommend it

I used in both upper and lower holes of the struts to get enough total camber. Was able to get the camber on the money the 1st time. The SPC customer service is not very helpful in finding what you need if it's not in the catalog. I can read the catalog but sometimes you don't know what to look for and they are no help. Would buy more products from them if I could find them.

Could never go wrong with SPC. Installed these on my 2008 Honda Civic Si and was able to add and adjust camber for my alignment

ありがとうございました

Bon produit bonne qualité

They fit my S15 like it said and worked perfectly.

this piece was just what i needed for my truck. and the price was fair.i would shop more for products from amazon, when needed,