Timber Wolf Bandsaw Blade 3/4" x 105", 3 TPI

Timberwolf makes probably the best bandsaw blades out there. USA made or at least they used to be. Great resaw!

Excellent cut quality for ripping 4" thick stock. Far superior to the blades I've used in the past. Only cut for about an hour, so the longevity is unknown.

Bought this to resaw on a ridged with riser block. The blade cuts nice

Good quality, works well, competitively priced

I had added the 6" riser to my Jet saw, but never used it until recently. I made a jig to the fence for support of 12" wide redwood board that I needed to cut for batten boards on my house. (You can not buy 1x12 cedar our redwood here in Southern California to ensure that termites stay away: they don't care for the plywood sheeting underneath either). Well, what a disappointment with the 3/4" blade that I bought several years ago. With the blade guards in place, I could twist it about 30 degrees, which explained why the blade kept turning inward after only a few inches. What a difference with this Timber Wolf blade! It turned in no more that about 10 degrees, despite being thinner. I noticed how "tame" the old blade looked--more like for cross-cutting rather than rip sawing. I should have seen this from the beginning. Yes, I went with a cheap blade. Don't make the same mistake. But this Timber Wolf blade. plan later to rip (resaw) some 2" x 12 pieces of black walnut, which is much harder. It will take longer, but I will be satisfied that it won't turn in on me.One note of caution and a point of disagreement. I followed the recommended manner of adjusting the proper blade tension using the flutter test on the old blade: the adjustment screw on the back of the machine read 1", which I never set my saw at. When I turned on the machine, there was a loud pop, and the top tire split across in two. I replaced the tires. I will soon submit my review on the tires. Well, what to do? I took off the old blade and compared it to the new Timber Wolf blade. They were both the exact size. Two of my band saw enthusiastic friends told me that they never release the tension on their blades, and my observation would confirm this. Timber Wolf is making much ado about nothing. I realize that this is a big shibboleth among many band saw users, just as misconceptions abound: e.g. eating high cholesterol containing food is bad for you. Nonsense: your body makes 85% of it and it is an important (major) component of brain and nerve tissue. Or, water goes down the drain in the opposite direction in the southern hemisphere. It doesn't. And on and on misconceptions abound. I have been a professional scientist all my adult life, and I sadly must say that "strong inference," with no vigorous testing occurs here also.

First thing after buying a high-quality bandsaw with a big riser for milling and re-sawing wood is, you quickly find all these online debates about blades/methods for milling and re-sawing green & cured hardwoods, etc. No debate with the Timber Wolf 3/4" X 105 3 Tooth-Per-Inch blade because this blade does it all.I only speak from my own experience with it: I have milled wet green mesquite and re-sawn air-dried walnut, mesquite, mahogany, cypress and white pine in the process of building mesquite cutting boards, a 17-foot grand-banks dory, and numerous client projects. I love it because it works so well.When it finally dulled beyond what I could revive with a file after putting it through the ringer (which was longer than I thought considering the abuse mesquite dishes out), I tried buying a "carbide-tipped milling blade" from some other manufacturer and paid more money than I did on the Timber Wolf. It was totally an unusable piece of junk!So I just ordered my second Timber Wolf 3/4" 3 TPI blade with gifting season coming up and intend to launch an etsy site, where the real work will be done with this blade.Highly recommended from an experienced sawyer/craftmaster.

I got an 14inch jet bandsaw it has a 1and half HP motor and got this blade to go with it. This blade works like a charm. The boards I am re-sawing are 9 to 10 inches wide and 1 to 3/4 inches thick. The boards were siding on an old shed. I have a lot of this stuff. It will be interesting to see how long the blade last. So far I have cut about 30 BF and no problems. Read the instructions that come with the blade. There is info there to make the blade last longer and your saw to work better

It appeared to be a well made blade that would do a good resaw and last a long time.I could not actually try it because the manufacturer's packaging is too flimsy to expect to survive distribution, warehousing, and shipping. You need to be lucky to receive it undamaged; I was not lucky. The blade is coiled in a plastic bag with a thin piece of cardboard on one side, with no sides to keep the blade from shifting and poking through the plastic, or prevent the coil from being bent. If you read all the comments, you will see this problem is not unusual.

I should have bought this long ago, it is like having a new saw! I am very impressed.