1-1/2" Wrought Iron Patio Furniture Feet Cap for Outdoor Metal Table and Chair Leg Replacement Floor Protector Cups - 24 Pack

I don`t usually rate products so this is an exception. These feet are WONDERFUL! They popped into the bottom of my table and chairs with just few taps of a hammer. I used a thin piece of cardboard to protect the feet from the hammer but I'm not sure that was needed. They are a nice, snug fit and make my very heavy furniture a breeze to move now. I really like how the metal part of the foot now sits "on" the caps, keeping the metal away from moisure on my deck. I've already ordered a second bag for down the road IF these ever need replaced. Just cheap insurance as I like these caps that much! I ordered the black and they are very discreet but so very wonderful.

These are sturdy disks that slipped easily into the the leg bottoms of my patio furniture. Just a gentle tap with a hammer and they are in and not coming out. You will need to replace all four at one time otherwise you will have a wobbly chair since they elevate the chair about 1/4 inch. Very pleased.

These dont really fit my 1.43" id feet (1.5od) wrought iron feet. They aren't any thicker than other types and dont fit any better. Boiling doesn't help. A hot air gun doesn't help. Not a happy buyer. Maybe several real useful dimensions would have helped?

I purchased a couple bags of these foot caps for an extremely reasonable price for my father to install on his wrought iron, antique deck furniture. He inserted the cap and used a wooden mallet around the edges to work them into place. The install took about 30 minutes for 4 chairs and a table. He only had trouble with one, and it wasn't the cap's fault...the metal on the leg had a bump and wasn't completely round. He just took a file to smooth it out a bit, and the cap went on like a charm after that! His chairs look like brand new, and his new composite deck will not suffer scratches and gouges now when we slide those chairs around to drink coffee and watch the winter cardinals! Thanks for reading! Hope it helps!

They are heavy duty and nice, they are extremely hard to put on... they fit tight, but I’m having all kinds of issues installing them. I soaked them in hot water, used a screwdriver to try to help push them in.. to no avail! Out of 38, I have two on! I would given a few be star if it weren’t for the difficult installation!

Great product, tough plastic. Snug fit so it's going to need some elbow grease to get them in. I cleared and filed any burrs on the chair leg feet. No trimming of the glides was necessary but I did need to heat them up a bit to soften them and then I used a mallet to get them in.worked PERFECT

These installed very easily, and are nice and substantial! They will definitely keep our wood deck protected and help the chair feet last longer. Great price, too!

Time will tell but these fit my wrought iron patio furniture perfectly. TIP: The caps did not 'snap' tightly into a few of the chair feet. I gave each metal foot a slight squeeze with a pair of vice grips (you will need the clamping power) at 12/6 and 3/9 o'clock and the cap firmly seated! I like that the glide supports around the bottom edge of the foot. The originals fit INSIDE the foot and collapsed over time, letting the metal touch the deck.