DC97-16350E DC97-16350U Washer Suspension Rod Kit(OEM), Replace DC97-16350S DC97-16350K, Fit for Samsung Washer WA50R5400AV WA50R5400AW WA50R5200AW (DC97-16350E)

This Washer Suspension Rod Kit was a game-changer for my Samsung washer. After years of reliable service, my machine started making loud banging noises during the spin cycle. I realized that the suspension rods needed replacing, so I opted for this OEM kit, and I’m so glad I did!Here’s why this product is worth every penny:1. Perfect Fit: The rods fit seamlessly into my Samsung washer (model WA50R5400AV) and worked exactly as expected. Installation was straightforward with no need for special tools—just a little time and some basic DIY skills.2. Premium Quality: The materials are sturdy, and the reinforced springs provide the durability needed to withstand the forces during the washing cycle. It feels like the original parts but even better with the 2024 upgrade.3. Eliminated Noise and Vibration: After replacing the rods, the washer runs smoother, quieter, and more efficiently. The balance is restored, making the machine feel almost new.4. Long-Term Reliability: The included 10-year warranty gives me peace of mind knowing I’ve made a durable investment in my appliance.Overall: If your washer is experiencing excessive vibration, shaking, or unusual noises, this suspension rod kit is a must-have. It’s an easy fix that brings life back to your machine without the need for costly repairs or replacements.Pros: Easy installation, excellent fit, high-quality build, long-term warrantyCons: None so far—this product has exceeded my expectations!Would definitely recommend this to anyone needing an affordable, reliable solution for washer maintenance!

What I liked: Fast delivery; came overnight.Product appeared well made..Pre-greased..What I didn’t like:Rod top looks like bottom of worn out original Samsung rods. The curved end of the replacement rod that locks into the slots in the cap goes UP. It locks at the bottom of the washer on the original Samsung rods.I was very hesitant to buy this product or any replacement OEM because of the poor reviews. but then I got very tired of my washer, shaking violently and stopping in the middle of the spin cycle. It was taking me about three times longer to do my laundry than it should have. So finally, I decided to just try it. It took me about three hours to do the whole job. Anybody that says they can do it in half an hour is lying. Make sure to watch several YouTube videos beforehand. it is necessary to prop up the lid with a short 2 x 4 or it will fall down and potentially damage the wires. Also, there are wires you have to unclip and one of the suspension rods has a plastic tube wrapped around it. Anyway, after I finished, I had no power which was very concerning, but it was because a fitting came loose in the top of the lid. Once I plugged that back in the washer worked like it was brand new again. I have been doing a normal amount of laundry for the last two weeks with zero problems.don’t forget to recalibrate your washing machine when you are done. There are instructions all over the Internet. Just google how to recalibrate a Samsung washing machine.

Used these to replace the worn-out rods in our Samsung washer and they have worked perfectly after the first few washes. Fair price, saved us at least a couple hundred dollars avoiding a service call or complete washer replacement. These rods seem at least comparable to OEM, no discernible difference in thickness or spring length but they seem sufficient.Fairly easy to install, took about an hour with basic hand tools. Majority of the time was disassembling the washer, the actual rod replacement takes ~1min each (except for the one on the back right, which took ~3min and maneuvering around the clip/hose).

My Samsung WA50T5300AC/US would have the washing drum banging on the sides of the machine while spinning, didn't matter if it was at low speeds or high speeds. Which eventually would produce the Unbalanced load code. After a lot of searching the internet for fixes on this issue, I decided to try my hand at just changing the suspension rods myself.Which brought me to this item. Super easy to install. Plenty of easy videos to follow on YouTube.After installing these brand-new replacement rods into my washing machine, I was able to get one load of laundry to run totally through to the end of its cycle without getting an unbalanced error/code.The next day, my family did a couple loads of laundry, both ended up having the unbalanced code again.Even though they had the error code, I continued to look for possible issues/fixes. I did the calibrate mode, and then ran a load again. Still ended up with the banging washing drum, and error code.Flash forward about 6 months, I have had it with this Samsung washing machine and will never buy one again. But this machine is only 2 years old, so I had to try to fix it one last time before throwing it out.I bought a different set of suspension rods here on Amazon. Installed them, ran the calibration mode on the machine.Zero issues. The last two days we have ran about 10 loads through, no banging, no error codes. The drum appears to be completely stable.The link to the part is herehttps://www.amazon.com/gp/product/B0CM99P161/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1They will look just like these; except they have like a 1" plastic tube around the spring.I understand how frustrating this error code/ issue is, and I hope this helps anyone else out there with this issue.