AI AIKENUO Thermal Pad 12W/mK, 100x100x1.5mm Insulated Heat Resistant High Temperature Resistant Silicone Thermal Pads for Laptop Heatsink/CPU/GPU/SSD/IC/SMD/LED Cooler

It worked great on dropping my 3080 and 3070ti card vrams to the low 80s. Would recommend and will buy more of.

Ive always wanted to know if the higher 12w/mk actually made a difference so I bought these pads, the 100x100x1.5 12w/mk, and the 200x200x1.5mm 6w/mk from the same brand.I have 3 3080s with waterblocks on the same loop with an external radiator. they are piped in serial, so the last card gets the hottest water.before new pads mining-Card 1 92C (ASUS TUFF with BYKSKI waterblock)Card 2 78C (EVGA HYDROCOPPER, Untouched)Card 3 100C( EVGA FTW3 ULTRA with BARROW waterblock, before waterblock 90C)so i thought perhaps my radiator was not enough, or that the last card was getting too hot temps. so i decided to change the pads, and conduct a little experiment to see if the 12w pads were actually better. i used the 12w pads on the worst card, and the 6w pads on the medium card.NEW PADSCard 1 , 6w pads. 84CCard 2, 78C untouchedCard 3, 12w Pads, 68C!!!!!!!I was not expecting 30 degrees difference at all. blown away.. now, the barrow block is beating the Hydro copper by 10c , and its absorbing the hottest water.in conclusion, the 12w pads are absolutely amazing. however, the 6w pads are definitely better than the stock pads, and for the same money, give you 4x the pad. quite a value. if you are cooling any other card that is not a 3080 or 3090, this will be sufficient.the 12w pads 100x100 are enough for several cards... maybe 5 at least. the 200x200 for 4x that easily. hope this helpsUPDATE: 1 Year later, mining 24/7. No loss in performance. i havent had to open up a card yet, but there is no sign of the pads leaking. These pads are great.

Funcionan según lo previsto

I don’t normally do reviews but these thermal pads are simply put amazing. I went from 108-110 degrees to low 80s on my 3090. Absolutely amazing heat distribution and very easy to install. Also these thermal pads do compress so don’t be afraid when applying.

This is my first time I have replaced thermal pads for a graphics card. So it's hard for me to really give a comparison. Instead, I will give you my thoughts on the product itself. I use this for a MSI 1070 graphics card. The product itself was easy to cut. The temperatures prior because of the old thermal pads on their graphics cards were about 50 c idle. After replacing it with this product it maintained around 40. When I was playing games before replacing the pads it would get up to 70. Now it's maintained around 60 2 63. After any heavy processing it goes right back down to its normal idle Temps. I'm happy with the product I would say that if you squeeze it at all it does not bounce back it does kind of crumble a little so be aware of that but as far as heat distribution it seems to work quite well.