MICTUNING Motorcycle USB Charger,SAE to USB Cable Adapter SAE Quick Disconnect 2.1A Waterproof USB Port with Inline Fuse, Socket Cable 12V-24V for Motorcycle Cellphone Tablet GPS More

I needed this cable to connect USB equipment to a benchtop power supply in a lab. It was to charge a device at ~5V that has no internal current limiting and could draw up to 3A which I needed to limit to 500mA for safety purposes. I set the benchtop supply output to 12V @ 500mA and this cable's integrated regulator was delivering 4.47V at 500mA to the device which was good enough for safe charging. Because the supply was operating in a current limited mode, the effective voltage delivered to this cable's internal regulator was effectively ~6V but it could still regulate just fine. Very impressive! In fact it could deliver stable output with the source voltage as low as 7V. That's a pretty good operating range. The build quality overall is great. It's durable, rugged, and having the built in fuse is great. It also comes with a spare fuse too. Nothing about it seems flimsy or cheap.

Really happy with this little unit so far. Installed it on my 2017 Honda Grom, and other than taking off the bike plastics, installation was a breeze. The wiring harness is long enough for my little bike, and I assume it would do the job even on a bigger bike. This little guy charges quickly - yesterday I was able to charge up 16% in a 13 minute ride, and that was with the phone tracking my ride using its GPS. The connection to the USB port feels sturdy - it's a tight fit which is nice. The waterproof cover is a great thing, and slides on and off easily enough. I'm happy with the build quality so far, and time will tell how well the joins hold up. One notable item is that, because the harness is wired directly to the battery this unit draws power 24/7 and regardless of whether anything is plugged in to the USB port. The draw is very small, but it's conceivable that you could drain your battery if you either charge your phone while the engine is not running, or don't ride your bike for an extended time while leaving the harness connected. The workaround is to remove the fuse, which almost surely be housed in your glovebox/very close to the battery. All in all, it's a great, easy, and affordable addition to any bike. Highly recommended.

Working good formw.

Works great, bought a second time for my buddy who was impressed with how stealth and integrated to my bike it looks. Easy to install straight connection to battery never had an issue with this charger draining my battery even after have a Bluetooth speaker hooked up to it for hours. The only thing wrong with this and it was my fault can’t blame the product is it won’t charge android phones but works great with iPhones. It did when I first got it but I cut and spliced the wire for a project and now it won’t put out the appropriate amps to charge and Android. But again that was my fault not the product. Highly recommended.

This USB adapter is surprisingly good for the price. While it's a simple solution for setting up a USB port for my phone, the quality of all components seem to be quite good. I was able to connect the first cable directly to my battery (under the seat as is the case with most motorcycles), and the cord length was sufficient to run under the tank to the front end of the tank where the plug is easily accessible. From that point I have the option of plugging in the second cable, which is the USB port, on the fly. That way I'm not draining the battery unnecessarily. I appreciated that each of the end plugs is capped to keep moisture and dirt out. The cable connected to the battery also supports the cable connector for my trickle charger. So, I don't even need to take off my seat anymore to connect the charger.

A great cheap product that works well, I use a Samsung fast charger and it goes like gold. This was easy to hook up, just ran it under the body to the battery on my Kawasaki KLR 650, screwed it down, zip tied it in appropriate spots, and zip tied it to the bars. Now I can use Google Maps on my phone wherever I go, I use a phone mount to hold my Samsung S7 Edge in place and this to charge it. Comes with a cover for the USB, I've been through 2 driving rain showers, and my bike sat all day in the rain in the parking lot at work, and this sucker still works like a charm. You just clip the cover back on when you're not using it. It zip-ties to the bars very effectively, clever thing they thought up, it's clearly designed to be used with zip ties, which after all are a biker's best friend. Worth the money, certainly, a good cheap charging option. Enjoy!

Used for a few months now, easy wiring to my battery, no on/off switch but takes no juice with nothing plugged in, USB-A, since it's small i can just have it tucked away. i have a 4-Port usb hub plugged into it since it's only 1 port. can also be unplugged from included SAE and can hook up a tender/trickle charger, you can also plug the usb part directly into your existing sae

This item was so easy to install on my bike. I removed the seat and hooked it up to the battery...easy. I actually ran the wire under my leather tank cover strip to the front of the tank. Used a wire tie by the battery and by the front of the tank to secure it. Mounted the plug on the handle bar with the zip ties provided and it was up and running. Took me less than 10 minutes to install. I unplug the plug from the cable after each ride so it won't stay "live" to the battery, but with the 10 amp fuse that comes on it I'm sure the trickle charge would be minimum. I just do it just in case. Cool part is that it has the same connection as a battery tender so now charging the battery is just that much easier! Great little product!