Max Strip Paint & Varnish Stripper 32oz - Paint Stripper for Multiple Layers of Acrylic, Latex, Oil & Water-Based Paints, varnishes. for Wood, Metal, Masonry, Plaster, Tile, molding.

The effect was not as good as expected. Cannot be completely removed

This product is amazing it work pretty well on removing wood stain. I followed the directions and within minutes it went to work. Best part is cleans up well with water and white vinegar, wear gloves because this can/will get messy, and then wipe down with plenty of towels. I will admit though I did need a Scouring pad like a scotch-brite green scouring pad, because scraping wasn’t always the best. Overall this product works well and I would even recommend combining this with Dumond Chemicals, Inc. 3332 Smart Strip Advanced Paint Remover because that will add to the sheerness of this product. For paint I might have to use something else because this product is just not strong enough for paint, especially oil paint. If it’s a single layer of latex paint or acrylic paint it’s fine or for a varnish surface, but if it’s a mixture of oil Paint and latex paint or acrylic paint this won’t work, I tried it, and it’s just not working. However, I may have not applied enough so I’ll try again then update my review if I get different results. However, for removing wood stain it seems to work just fine and combine with smart strip it really does work.

Brilliant product, would say if you know there is alot of paint then will definitely need multiple applications. Smell isn't terrible which is always beneficial, thickness is like pva glue. Good value for money.

I could not have completed this project without this product, due to arthritis in my hands. Here is how I used it, based on other reviewers recommendations. I placed cardboard and/or paper down on the carpeting under this cabinet to keep it protected from the damp paint that came loose during this process. Here are the steps I used. 1. I wore nitrile gloves to keep my hands safe. 2) After emptying it of its contents, I thoroughly cleaned the china cabinet. It had a very old, shiny, faux gold with wood grain, paint effect under a heavy gloss varnish. There were at least four coats of paint, including black three layers down, and a wood stain, likely original from when the piece was first sold. 2. I applied this product to one small area at a time (the top, one side at a time, one surface at a time...you get the idea). I tried to paper and tape the glass, but that didn't work. The product was absorbed into the paper. I just cleaned the glass with left over product after the project was completed (I used heavy duty nail polish remover in tiny, hard to reach areas). 3. I used a sponge or towel to apply the product. I applied to an area of the cabinet about the size of a paper towel. I used a spray bottle to dampen a paper towel. I placed the damp paper towel over the product. I used painter tape to seal plastic wrap over the paper towel. After about 30 mins. I checked to make sure the paper towel was still damp. If it wasn't, I misted it with water again and returned the plastic over it. I repeated this as necessary in areas that were tougher to tackle (there were a few, especially at the beginning of the project, and the inside of the top of the cabinet was awkward. I had to do a few spots more than twice). After about an hour from first applying the product, I used a scraper to simply slide ALL of the layers of varnish, paint and stain off. It was amazing. I needed two bottles of this to complete the inside and outside of the china cabinet. The smell wasn't unpleasant. Not chemical. I did use a fan (which was why I started checking the paper towels were still damp every 30 mins or so) and was right next to an open window for ventilation. The fan was not facing the cabinet, but its effect was enough to start to dry the paper towels more than once. I tried another product that has a citrus base that has a smell I cannot tolerate. I prefer this product in every conceivable way. It is easy to use. It is safe. I like the size as I cannot handle heavy containers. This product sticks to the surface well, especially vertical surfaces, when using the damp paper towel covered with plastic wrap method. I never would have been able to tackle this project if I had needed to use elbow grease. I needed a few different sized scrapers, because there were very narrow, as well as rounded areas in the cabinet. I had some clay shaping tools that worked really well for this. I also used paper towels when removing the ribbons of paint layers that were coming off. That was sticky and messy. I went through a lot of nitrile gloves and paper towels, but both were critical to my success. Use the thicker quality gloves (6 mil or more), not the cheapest (3 mil). Overall, this is my go-to product now. I am eyeing lots of other pieces of furniture that won't be devalued by stripping, and will look so much better in their natural state. As a follow up. I cleaned this cabinet with Old English wood oil. It is an old but effective wood cleaner I've used for decades. Photo 1 shows the ugly gold paint still present inside on the bottom shelf of the cabinet. The whole thing looked like that. Photo 2 shows the new improved cabinet after stripping and then applying Old English Wood Oil. I did not add a stain. I'm very pleased with the results. Now I can fill it back up with my china.

After leaving for 1 hour, it managed to affect the 1st layer of paint, which still needed to be scrapped off with a lot of effort. To have any affect on paint, it needs to be painted on very thickly. Since it is a very water substance, it is only suitable for flat surfaces - it will drip off of vertical surfaces. In the end, using it is little better than just scraping the paint off by hand, without using paint a chemical stripper. I would also be careful using it indoors; it did make me feel very dizzy. You'll need to have all windows and doors open.