Monoprice 102681 3-Feet RG6 RCA CL2 Rated Digital Coaxial Audio Cable Black

Seems like a solid CL2 rated cable. Bought it to run to the back of the room through the basement. The cable is stiff and not easy to connect to a walk plate due to limited space in the electric box. Way easier to handle with a low voltage wall bracket. Fishing it through the external wall, full of insulation is not bad, but getting the loop behind the wall bracket is tough.You can fish it through a 1/2" hole if you temporarily slide the red rubber ring off. I did it while protecting the connector with poly film secured by electric tape. Its tight but it went through the 1/2 hole in the subfloor.Still need to finish my setup and move the subwoofer to the back wall. Will provide an update if experience any issues.UPDATE: successfully ran the cable through basement and have my subwoofer connected to AV receiver by total of 50 feet of RCA cable. 10 feet + this 25 feet cable + another 15. Works like a charm. Zero noise, subwoofer switches to standby mode without signal as it should. RIGER makes awesome quality cables.

These are very high-quality cables that won't break the bank. I use them to connect my Arcam AVR5 receiver to my Arcam PA720 7-channel Power Amplifier. They are very well insulated and introduce no noise nor do they allow interference into the audio path. Highly recommend these cables!

Although this is sold as a digital audio cable, it is simply a coaxial cable with RCA male connectors on each end. I bought it to connect my old Atari 7800 to my RF-to-HDMI converter. I had been using a very thin composite AV cable that had no shielding, and was not meant for handling an RF signal. That cable was unsuited for the task, as it allowed tons of RFI from nearby electronics to mess with the signal, resulting in lots of static. So I ordered this cable, knowing it would have the proper shielding to block out RFI. And it works beautifully. Clear signal from the old console to my modern smart monitor via the converter. If you have an old Atari or other pre-Crash console that outputs RF on channel 2 or 3, you need this cable for maximum signal quality.

Digital optical good cable worth the money sounds good on my system

Monoprice RG6/U cables are great for those that want good quality and don't want to break the bank.What's nice about Monoprice cables is they have all the qualities of the high (over) priced cables. For example, these have a pure copper conductor, something which cables of much higher $$ boast. Also, these cables have a VERY low capacitance, meaning they are ideal for long runs without worrying about signal loss or high end roll off. I measure these and 19 pf / foot, which is right up there with the best of them. Also, these boast double braided shielding for EMI, RFI. The heavier gauge and build do mean a little less flexibility, but on the flip side it gives durability and reliability, and allows in wall if needed.I typically use RG6/U for subwoofer and Digital Coax connections, but these can be used anywhere you use a standard RCA type cable.Good cables. Thanks for reading.

Very good cables. Transfer of sound was clean as promised.

heavy duty just what my subwoofer needed to perform better than ever this a quality cable

The product description was spot on! I am extremely Happy with this purchase! Perfect size and extremely easy to assemble. I highly recommend!